Label: POTASSIUM CHLORIDE injection, solution

  • NDC Code(s): 0990-7074-26, 0990-7075-14, 0990-7075-26, 0990-7077-14, view more
    0990-7077-26
  • Packager: ICU Medical Inc.
  • Category: HUMAN PRESCRIPTION DRUG LABEL
  • DEA Schedule: None
  • Marketing Status: New Drug Application

Drug Label Information

Updated June 18, 2020

If you are a consumer or patient please visit this version.

  • SPL UNCLASSIFIED SECTION

    For Use Only With A Calibrated Infusion Device

  • BOXED WARNING (What is this?)

    Highly Concentrated

  • SPL UNCLASSIFIED SECTION

    Flexible Plastic Container

    Ready To Use

    Rx only

  • DESCRIPTION

    This Potassium Chloride Injection is a sterile, nonpyrogenic, highly concentrated, ready-to-use solution of Potassium Chloride, USP in Water for Injection, USP for electrolyte replenishment in a single dose container for intravenous administration. It contains no antimicrobial agents.

    Potassium

    Chloride

    Injection

    mEq Potassium/

    Container

    Composition

    (g/L)

    Potassium

    Chloride, USP

    (KCl)

    Osmolarity*

    (mOsmol/L)

    (calc)

    pH

    Ionic Concentration

    (mEq/L)

    Potassium

    Chloride

    10 mEq/100 mL

    7.45

    200

    5.8

    (4.0 to 8.0)

    100

    100

    10 mEq/50 mL

    20 mEq/100 mL

    14.9

    400

    5.8

    (4.0 to 8.0)

    200

    200

    20 mEq/50 mL

    40 mEq/100 mL

    29.8

    799

    5.8

    (4.0 to 8.0)

    400

    400

    *Normal physiologic osmolarity range is approximately 280 to 310 mOsmol/L. Administration of substantially hypertonic solutions (≥600 mOsmol/L) may cause vein damage.

    This flexible plastic container is fabricated from a specially formulated polyvinylchloride. Exposure to temperatures above 25°C (77°F) during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain of its chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials.

  • CLINICAL PHARMACOLOGY

    Potassium is the major cation of body cells (160 mEq/liter of intracellular water) and is concerned with the maintenance of body fluid composition and electrolyte balance. Potassium participates in carbohydrate utilization, protein synthesis, and is critical in the regulation of nerve conduction and muscle contraction, particularly in the heart. Chloride, the major extracellular anion, closely follows the metabolism of sodium, and changes in the acid-base of the body are reflected by changes in the chloride concentration.

    Normally about 80 to 90% of the potassium intake is excreted in the urine, the remainder in the stools and to a small extent, in the perspiration. The kidney does not conserve potassium well so that during fasting, or in patients on a potassium-free diet, potassium loss from the body continues resulting in potassium depletion. A deficiency of either potassium or chloride will lead to a deficit of the other.

  • INDICATIONS AND USAGE

    Potassium Chloride Injection is indicated in the treatment of potassium deficiency states when oral replacement is not feasible.

    THIS HIGHLY CONCENTRATED, READY-TO-USE POTASSIUM CHLORIDE INJECTION IS INTENDED FOR THE MAINTENANCE OF SERUM K + LEVELS AND FOR POTASSIUM SUPPLEMENTATION IN FLUID RESTRICTED PATIENTS WHO CANNOT ACCOMMODATE ADDITIONAL VOLUMES OF FLUID ASSOCIATED WITH POTASSIUM SOLUTIONS OF LOWER CONCENTRATION.

    When using these products, these patients should be on continuous cardiac monitoring and frequent testing for serum potassium concentration and acid-base balance.

  • CONTRAINDICATIONS

    Potassium Chloride Injection is contraindicated in diseases where high potassium levels may be encountered, and in patients with hyperkalemia, renal failure and in conditions in which potassium retention is present.

  • WARNINGS

    THIS HIGHLY CONCENTRATED, READY-TO-USE POTASSIUM CHLORIDE INJECTION IS INTENDED FOR THE MAINTENANCE OF SERUM K + LEVELS AND FOR POTASSIUM SUPPLEMENTATION IN FLUID RESTRICTED PATIENTS WHO CANNOT ACCOMMODATE ADDITIONAL VOLUMES OF FLUID ASSOCIATED WITH POTASSIUM SOLUTIONS OF LOWER CONCENTRATION.

    TO AVOID POTASSIUM INTOXICATION, DO NOT INFUSE THESE SOLUTIONS RAPIDLY.

    PATIENTS REQUIRING HIGHLY CONCENTRATED SOLUTIONS SHOULD BE KEPT ON CONTINUOUS CARDIAC MONITORING AND UNDERGO FREQUENT TESTING FOR SERUM POTASSIUM AND ACID-BASE BALANCE, ESPECIALLY IF THEY RECEIVE DIGITALIS.

    In patients with renal insufficiency, administration of potassium chloride may cause potassium intoxication and life-threatening hyperkalemia.

    Administer intravenously only with a calibrated infusion device at a slow, controlled rate. (See DOSAGE AND ADMINISTRATION.) Because pain associated with peripheral infusion of Potassium Chloride solution has been reported, whenever possible administration via a central route is recommended for thorough dilution by the blood stream and avoidance of extravasation. Highest concentrations (300 and 400 mEq/L) should be exclusively administered via central route.

    The administration of intravenous solutions can cause fluid and/or solute overload resulting in dilution of serum electrolyte concentrations, overhydration, congested states or pulmonary edema. The risk of dilutional states is inversely proportional to the electrolyte concentration. The risk of solute overload causing congested states with peripheral and pulmonary edema is directly proportional to the electrolyte concentration.

  • PRECAUTIONS

    Laboratory Tests

    Serum potassium levels are not necessarily indicative of tissue potassium levels. Solutions containing potassium should be used with caution in the presence of cardiac or renal disease.

    Clinical evaluation and periodic laboratory determinations are necessary to monitor changes in fluid balance, electrolyte concentrations, and acid-base balance during prolonged parenteral therapy or whenever the condition of the patient warrants such evaluation. Significant deviations from normal concentrations may require the use of additional electrolyte supplements, or the use of electrolyte-free dextrose solutions to which individualized electrolyte supplements may be added.

    Pregnancy:

    Pregnancy Category C. Animal reproduction studies have not been conducted with potassium chloride. It is also not known whether potassium chloride can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. Potassium chloride should be given to a pregnant woman only if clearly needed.

    Pediatric Use:

    These products should not be used in pediatric patients at this time.

    Do not administer unless solution is clear and seal is intact.

  • ADVERSE REACTIONS

    Potassium intoxication with mild or severe hyperkalemia has been reported. The signs and symptoms of intoxication include paresthesia of the extremities, areflexia, muscular or respiratory paralysis, mental confusion, weakness, hypotension, cardiac arrhythmia, heart block, electrographic abnormalities and cardiac arrest. EKG abnormalities serve as a clinical reflection of the seriousness of changes in serum potassium concentrations: peaked T waves and prolonged P-R intervals usually occur with modest elevations above the upper limit of normal potassium concentrations; P waves disappear, the QRS complex widens, and eventual asystole usually occurs with higher elevations.

    Reactions which may occur because of the solution or the technique of administration include febrile response, infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection, extravasation and hypervolemia.

    Infusion of highly concentrated potassium chloride solutions may cause local pain and vein irritation. (See WARNINGS).

    Reactions reported with the use of potassium-containing solutions include nausea, vomiting, and abdominal pain and diarrhea.

    If an adverse reaction does occur, discontinue the infusion, evaluate the patient, institute appropriate therapeutic countermeasures and save the remainder of the fluid for examination if deemed necessary.

  • OVERDOSAGE

    In the event of hyperkalemia, discontinue the infusion immediately and institute corrective therapy to reduce serum potassium levels as necessary. The use of potassium containing foods or medications must also be eliminated.

    Treatment of mild to severe hyperkalemia with signs and symptoms of potassium intoxication includes the following:

    1. Dextrose Injection, USP, 10% or 25%, containing 10 units of crystalline insulin per 20 grams of dextrose administered intravenously, 300 to 500 mL per hour.

    2. Absorption and exchange of potassium using sodium or ammonium cycle cation exchange resin, orally and as retention enema.

    3. Hemodialysis and peritoneal dialysis.

    In cases of digitalization, too rapid a lowering of plasma potassium concentration can cause digitalis toxicity.

  • DOSAGE AND ADMINISTRATION

    The dose and rate of administration are dependent upon the specific condition of each patient.

    Administer intravenously only with a calibrated infusion device at a slow, controlled rate. Because pain associated with peripheral infusion of Potassium Chloride solution has been reported, whenever possible, administration via central route is recommended for thorough dilution by the blood stream and avoidance of extravasation. Highest concentrations (300 and 400 mEq/L) should be exclusively administered via central route.

    Recommended administration rates should not usually exceed 10 mEq/hour or 200 mEq for a 24-hour period if the serum potassium level is greater than 2.5 mEq/liter.

    In urgent cases where the serum potassium level is less than 2 mEq/liter or where severe hypokalemia is a threat (serum potassium level less than 2 mEq/liter and electrocardiographic changes and/or muscle paralysis), rates up to 40 mEq/hour or 400 mEq over a 24-hour period can be administered very carefully when guided by continuous monitoring of the EKG and frequent serum K+ determinations to avoid hyperkalemia and cardiac arrest.

    Parenteral drug products should be inspected visually for particulate matter and discoloration, whenever solution and container permit. Use of a final filter is recommended during administration of all parenteral solutions where possible.

    Do not add supplementary medication.

    Preparation for Administration

    (Use aseptic technique)

    1. Close flow control clamp of administration set.

    2. Remove cover from outlet port at bottom of container.

    3. Insert piercing pin of administration set into port with a twisting motion until the set is firmly seated. NOTE: See full directions on administration set carton.

    4. Suspend container from hanger.

    5. Squeeze and release drip chamber to establish proper fluid level in chamber.

    6. Open flow control clamp and clear air from set. Close clamp.

    7. Attach set to venipuncture device. If device is not indwelling, prime and make venipuncture.

    8. Regulate rate of administration with flow control clamp.

    WARNING: Do not use flexible container in series connections. Do not add supplementary medication. Such use could result in air embolism due to residual air being drawn from the primary container before administration of the fluid from the secondary container is completed.

  • HOW SUPPLIED

    Potassium Chloride Injection in flexible plastic containers is available as follows:

    NDC No.

    Potassium per container

    0409–7074–26

    10 mEq/100 mL

    0990-7074-2610 mEq/100 mL

    0409–7075–14

    10 mEq/50 mL

    0990-7075-1410 mEq/50 mL

    0409–7075–26

    20 mEq/100 mL

    0990-7075-2620 mEq/100 mL

    0409–7077–14

    20 mEq/50 mL

    0990-7077-1420 mEq/50 mL

    0409–7077–26

    40 mEq/100 mL

    0990-7077-2640 mEq/100 mL

    ICU Medical is transitioning NDC codes from "0409" to a "0990" labeler code. Both NDC codes are expected to be in the market for a period of time.

    Store at 20 to 25°C (68 to 77°F). [See USP Controlled Room Temperature.]

    Revised: June, 2018

    EN-4654

    ICU Medical, Inc., Lake Forest, Illinois, 60045, USA

  • CLINICAL STUDIES

  • PRINCIPAL DISPLAY PANEL - 100 mL Bag Label

    For Use Only With A Calibrated Infusion Device

    Highly Concentrated
    100 mEq/L

    100 mL
    NDC 0990-7074-26

    POTASSIUM CHLORIDE Inj.

    10
    mEq

    EACH 100 mL CONTAINS POTASSIUM CHLORIDE
    745 mg IN WATER FOR INJECTION. ELECTROLYTES
    PER 1000 mL: POTASSIUM 100 mEq; CHLORIDE
    100 mEq.
    200 mOsmol/LITER (CALC.)
    pH 5.8 (4.0 to 8.0)

    DO NOT ADD SUPPLEMENTARY MEDICATION.
    WHENEVER POSSIBLE USE CENTRAL ROUTE.

    SINGLE-DOSE CONTAINER. FOR I.V. USE. USUAL
    DOSAGE: SEE INSERT. STERILE, NONPYROGENIC.
    USE ONLY IF SOLUTION IS CLEAR AND CONTAINER
    IS UNDAMAGED. MUST NOT BE USED IN SERIES
    CONNECTIONS.

    Rx ONLY

    3
    V
    CONTAINS DEHP

    ICU Medical, Inc.,
    Lake Forest, Illinois, 60045, USA

    icumedical

    IM-4339

    PRINCIPAL DISPLAY PANEL - 100 mL Bag Label
  • PRINCIPAL DISPLAY PANEL - 100 mL Bag Pouch Label

    TO OPEN – TEAR AT NOTCH
    NDC 0990-7074-26
    For use only with a calibrated infusion device.
    HIGHLY CONCENTRATED

    100
    mEq/L

    POTASSIUM
    CHLORIDE Inj.

    10
    mEq

    Total in 100 mL

    Each 100 mL contains potassium chloride 745 mg in water for injection.
    Electrolytes per 1000 mL: potassium 100 mEq; chloride 100 mEq.
    200 mOsmol/liter (CALC.)
    pH 5.8 (4.0 to 8.0)

    DO NOT ADD SUPPLEMENTARY MEDICATION. WHENEVER POSSIBLE USE
    CENTRAL ROUTE.

    Single-dose container. For I.V. use. Usual dosage: See insert. Sterile, nonpyrogenic.
    Use only if solution is clear. After removing the overwrap, check for minute leaks
    by squeezing container firmly. If leaks are found, discard unit as sterility may be
    impaired. Must not be used in series connections.

    The overwrap is a moisture barrier. Do not remove unit from overwrap until ready
    for use. Use unit promptly when pouch is opened. Store at 20 to 25°C (68 to 77°F). [See
    USP Controlled Room Temperature.] Protect from freezing. See insert.

    Rx only

    7
    OTHER

    F WR-0529

    ICU Medical, Inc., Lake Forest, Illinois, 60045, USA

    icumedical

    PRINCIPAL DISPLAY PANEL - 100 mL Bag Pouch Label
  • PRINCIPAL DISPLAY PANEL - 50 mL Bag Label - IM-4340

    For Use Only With A Calibrated Infusion Device

    Highly Concentrated
    200 mEq/L

    50 mL
    NDC 0990-7075-14

    POTASSIUM CHLORIDE Inj.

    10
    mEq

    EACH 100 mL CONTAINS POTASSIUM CHLORIDE
    1490 mg IN WATER FOR INJECTION. ELECTROLYTES
    PER 1000 mL: POTASSIUM 200 mEq; CHLORIDE
    200 mEq.
    400 mOsmol/LITER (CALC.)
    pH 5.8 (4.0 to 8.0)

    DO NOT ADD SUPPLEMENTARY MEDICATION.
    WHENEVER POSSIBLE USE CENTRAL ROUTE.

    SINGLE-DOSE CONTAINER. USUAL DOSAGE: SEE
    INSERT. FOR I.V. USE. STERILE, NONPYROGENIC.
    USE ONLY IF SOLUTION IS CLEAR AND CONTAINER
    IS UNDAMAGED. MUST NOT BE USED IN SERIES
    CONNECTIONS.

    Rx ONLY

    3
    V
    CONTAINS DEHP

    icumedical

    IM-4340

    ICU Medical, Inc., Lake Forest, Illinois, 60045, USA

    PRINCIPAL DISPLAY PANEL - 50 mL Bag Label - IM-4340
  • PRINCIPAL DISPLAY PANEL - 50 mL Bag Pouch Label - WR-0530

    TO OPEN – TEAR AT NOTCH
    NDC 0990-7075-14
    For use only with a calibrated infusion device.
    HIGHLY CONCENTRATED

    200
    mEq/L

    POTASSIUM
    CHLORIDE Inj.

    10
    mEq

    Total in 50 mL

    Each 100 mL contains potassium chloride 1490 mg in water for injection.
    Electrolytes per 1000 mL: potassium 200 mEq; chloride 200 mEq.
    400 mOsmol/liter (CALC.)
    pH 5.8 (4.0 to 8.0)

    DO NOT ADD SUPPLEMENTARY MEDICATION. WHENEVER POSSIBLE USE
    CENTRAL ROUTE.

    Single-dose container. For I.V. use. Usual dosage: See insert. Sterile, nonpyrogenic.
    Use only if solution is clear. After removing the overwrap, check for minute leaks
    by squeezing container firmly. If leaks are found, discard unit as sterility may be
    impaired. Must not be used in series connections.

    The overwrap is a moisture barrier. Do not remove unit from overwrap until ready
    for use. Use unit promptly when pouch is opened. Store at 20 to 25°C (68 to 77°F).
    [See USP Controlled Room Temperature.] Protect from freezing. See insert.

    Rx only

    7
    OTHER

    F WR-0530

    ICU Medical, Inc., Lake Forest, Illinois, 60045, USA

    icumedical

    PRINCIPAL DISPLAY PANEL - 50 mL Bag Pouch Label - WR-0530
  • PRINCIPAL DISPLAY PANEL - 50 mL Bag Label - IM-4342

    For Use Only With A Calibrated Infusion Device

    Highly Concentrated
    400 mEq/L

    50 mL
    NDC 0990-7077-14

    POTASSIUM CHLORIDE Inj.

    20
    mEq

    EACH 50 mL CONTAINS POTASSIUM CHLORIDE
    1.49 g IN WATER FOR INJECTION. ELECTROLYTES
    PER 1000 mL: POTASSIUM 400 mEq; CHLORIDE
    400 mEq.
    799 mOsmol/LITER (CALC.)
    pH 5.8 (4.0 to 8.0)
    HYPERTONIC – MAY CAUSE VEIN DAMAGE.
    DO NOT ADD SUPPLEMENTARY MEDICATION.
    WHENEVER POSSIBLE USE CENTRAL ROUTE.
    DISCONTINUE INFUSION IF ADVERSE REACTION
    OCCURS. SINGLE-DOSE CONTAINER. FOR I.V.
    USE. USUAL DOSAGE: SEE INSERT. STERILE,
    NONPYROGENIC. USE ONLY IF SOLUTION IS CLEAR
    AND CONTAINER IS UNDAMAGED. MUST NOT BE
    USED IN SERIES CONNECTIONS.

    Rx ONLY

    3
    V
    CONTAINS DEHP

    ICU Medical, Inc.,
    Lake Forest, Illinois, 60045, USA

    IM-4342

    icumedical

    PRINCIPAL DISPLAY PANEL - 50 mL Bag Label - IM-4342
  • PRINCIPAL DISPLAY PANEL - 50 mL Bag Pouch Label - WR-0536

    TO OPEN – TEAR AT NOTCH
    NDC 0990-7077-14
    For use only with a calibrated infusion device.
    HIGHLY CONCENTRATED

    20
    mEq

    POTASSIUM
    CHLORIDE Inj.

    400
    mEq/L

    Total in 50 mL

    Each 50 mL contains potassium chloride 1.49 g in water for injection. Electrolytes
    per 1000 mL: potassium 400 mEq; chloride 400 mEq.
    799 mOsmol/liter (CALC.)
    pH 5.8 (4.0 to 8.0)
    Hypertonic – may cause vein damage.

    DO NOT ADD SUPPLEMENTARY MEDICATION. WHENEVER POSSIBLE USE
    CENTRAL ROUTE.

    Discontinue infusion if adverse reaction occurs.

    Single-dose container. For I.V. use. Usual dosage: See insert. Sterile, nonpyrogenic.
    Use only if solution is clear. After removing the overwrap, check for minute leaks by
    squeezing container firmly. If leaks are found, discard unit as sterility may be impaired.
    Must not be used in series connections.

    The overwrap is a moisture barrier. Do not remove unit from overwrap until ready
    for use. Use unit promptly when pouch is opened. Store at 20 to 25°C (68 to 77°F).
    [See USP Controlled Room Temperature.] Protect from freezing. See insert.

    Rx only

    7
    OTHER

    F WR-0536

    ICU Medical, Inc., Lake Forest, Illinois, 60045, USA

    icumedical

    PRINCIPAL DISPLAY PANEL - 50 mL Bag Pouch Label - WR-0536
  • INGREDIENTS AND APPEARANCE
    POTASSIUM CHLORIDE 
    potassium chloride injection, solution
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:0990-7074
    Route of AdministrationINTRAVENOUS
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    POTASSIUM CHLORIDE (UNII: 660YQ98I10) (POTASSIUM CATION - UNII:295O53K152, CHLORIDE ION - UNII:Q32ZN48698) POTASSIUM CHLORIDE10 meq  in 100 mL
    Inactive Ingredients
    Ingredient NameStrength
    WATER (UNII: 059QF0KO0R)  
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:0990-7074-2624 in 1 CASE05/01/2019
    11 in 1 POUCH
    1100 mL in 1 BAG; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    NDANDA02016104/01/2019
    POTASSIUM CHLORIDE 
    potassium chloride injection, solution
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:0990-7075
    Route of AdministrationINTRAVENOUS
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    POTASSIUM CHLORIDE (UNII: 660YQ98I10) (POTASSIUM CATION - UNII:295O53K152, CHLORIDE ION - UNII:Q32ZN48698) POTASSIUM CHLORIDE200 meq  in 1000 mL
    Inactive Ingredients
    Ingredient NameStrength
    WATER (UNII: 059QF0KO0R)  
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:0990-7075-1424 in 1 CASE04/01/2019
    11 in 1 POUCH
    150 mL in 1 BAG; Type 0: Not a Combination Product
    2NDC:0990-7075-2624 in 1 CASE04/01/2019
    21 in 1 POUCH
    2100 mL in 1 BAG; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    NDANDA02016104/01/2019
    POTASSIUM CHLORIDE 
    potassium chloride injection, solution
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:0990-7077
    Route of AdministrationINTRAVENOUS
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    POTASSIUM CHLORIDE (UNII: 660YQ98I10) (POTASSIUM CATION - UNII:295O53K152, CHLORIDE ION - UNII:Q32ZN48698) POTASSIUM CHLORIDE400 meq  in 1000 mL
    Inactive Ingredients
    Ingredient NameStrength
    WATER (UNII: 059QF0KO0R)  
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:0990-7077-1424 in 1 CASE06/01/2019
    11 in 1 POUCH
    150 mL in 1 BAG; Type 0: Not a Combination Product
    2NDC:0990-7077-2624 in 1 CASE12/31/2019
    21 in 1 POUCH
    2100 mL in 1 BAG; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    NDANDA02016104/01/2019
    Labeler - ICU Medical Inc. (118380146)