Label: HEPARIN SODIUM injection

  • NDC Code(s): 0069-0043-01, 0069-0043-02, 0069-0058-01, 0069-0058-02, view more
    0069-0059-01, 0069-0059-02, 0069-0059-03, 0069-0059-04, 0069-0062-01, 0069-0062-02, 0069-0137-01, 0069-0137-03
  • Packager: Pfizer Laboratories Div Pfizer Inc
  • Category: HUMAN PRESCRIPTION DRUG LABEL
  • DEA Schedule: None
  • Marketing Status: New Drug Application

Drug Label Information

Updated September 24, 2024

If you are a consumer or patient please visit this version.

  • HIGHLIGHTS OF PRESCRIBING INFORMATION
    These highlights do not include all the information needed to use HEPARIN SODIUM INJECTION safely and effectively. See full prescribing information for HEPARIN SODIUM INJECTION.

    HEPARIN SODIUM INJECTION, for intravenous or subcutaneous use
    Initial U.S. Approval: 1939

    RECENT MAJOR CHANGES

    Warnings and Precautions, Hyperkalemia (5.9)

    7/2024

    INDICATIONS AND USAGE

    HEPARIN SODIUM INJECTION is an anticoagulant indicated for (1):

    Prophylaxis and treatment of venous thrombosis and pulmonary embolism
    Prophylaxis and treatment of the thromboembolic complications associated with atrial fibrillation
    Treatment of acute and chronic consumption coagulopathies
    Prevention of clotting in arterial and cardiac surgery
    Prophylaxis and treatment of peripheral arterial embolism
    Anticoagulant use in transfusion, extracorporeal circulation, and dialysis procedures

    DOSAGE AND ADMINISTRATION

    Recommended Adult Dosages:

    Therapeutic Anticoagulant Effect with Full-Dose Heparin* (2.3)

    Deep Subcutaneous (Intrafat) Injection
    Use a different site for each injection

    Initial Dose

    333 units/kg subcutaneously

    Every 12 hours

    250 units/kg subcutaneously

    Intermittent
    Intravenous Injection

    Initial Dose

    10,000 units

    Every 4 to 6 hours

    5,000 units to 10,000 units

    Continuous
    Intravenous Infusion

    Initial Dose

    5,000 units

    Continuous

    20,000 units/24 hours to 40,000 units/24 hours

    * Based on 68 kg patient. Adjust dose based on laboratory monitoring.

    Cardiovascular Surgery (2.5)

    Intravascular via Total Body Perfusion

    Initial Dose

    not less than 150 units/kg;
    adjust for longer procedures

    Low-dose Prophylaxis of Postoperative Thromboembolism (2.6)

    Deep Subcutaneous (Intrafat) Injection

    Initial Dose

    5,000 units 2 hours before surgery

    Every 8 to 12 hours

    5,000 units

    Extracorporeal dialysis (2.9)

    Intravascular via Extracorporeal Dialysis

    25 units/kg to 30 units/kg followed by infusion rate of 1,500 units/hour to 2,000 units/hour if manufacturers' recommendations are not available

    DOSAGE FORMS AND STRENGTHS

    Preservative-free, single-dose (3)

    Preserved with Benzyl Alcohol, multiple-dose (3)

    1,000 USP units/mL
         Vial: 2,000 USP units/2 mL (3)

    1,000 USP units/mL
         Vial: 10,000 USP units/10 mL
         Vial: 30,000 USP units/30 mL (3)

    5,000 USP units/mL
         Vial: 50,000 USP units/10 mL
         Vial: 5,000 USP units/1 mL (3)

    10,000 USP units/mL
         Vial: 10,000 USP units/1 mL (3)

    CONTRAINDICATIONS

    History of heparin-induced thrombocytopenia (HIT) or heparin-induced thrombocytopenia and thrombosis (HITTS) (4)
    History of thrombocytopenia with pentosan polysulfate (4)
    Known hypersensitivity to heparin or pork products (4)
    In whom suitable blood coagulation tests cannot be performed at appropriate intervals (4)
    An uncontrollable bleeding state, except when this is due to disseminated intravascular coagulation (4)

    WARNINGS AND PRECAUTIONS

    Fatal Medication Errors: Confirm choice of correct strength prior to administration (5.1)
    Hemorrhage: Hemorrhage, including fatal events, has occurred in patients receiving heparin. Use caution in conditions with increased risk of hemorrhage (5.2)
    HIT and HITTS: Monitor for signs and symptoms and discontinue if indicative of HIT and HITTS (5.3)
    Benzyl Alcohol Toxicity: Use preservative-free formulation in neonates and infants (5.4)
    Monitoring: Blood coagulation tests guide therapy for full-dose heparin. Periodically monitor platelet count, hematocrit, and occult blood in stool in all patients receiving heparin (5.5, 5.6)
    Hyperkalemia: Measure blood potassium in patients at risk of hyperkalemia before starting heparin therapy and periodically in all patients (5.9)

    ADVERSE REACTIONS

    Most common adverse reactions are hemorrhage, thrombocytopenia, HIT and HITTS, injection site irritation, general hypersensitivity reactions, and elevations of aminotransferase levels. (6.1)

    To report SUSPECTED ADVERSE REACTIONS, contact Pfizer at 1-800-438-1985 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.

    DRUG INTERACTIONS

    Drugs that interfere with coagulation, platelet aggregation or drugs that counteract coagulation may induce bleeding (7.2)

    USE IN SPECIFIC POPULATIONS

    Pregnancy: Preservative-free formulation recommended. (8.1)
    Lactation: Preservative-free formulation recommended. (8.2)
    Pediatric Use: Use preservative-free formulation in neonates and infants (8.4)

    See 17 for PATIENT COUNSELING INFORMATION.

    Revised: 9/2024

  • Table of Contents
  • 1 INDICATIONS AND USAGE

    HEPARIN SODIUM INJECTION is indicated for:

    Prophylaxis and treatment of venous thrombosis and pulmonary embolism;
    Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation;
    Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation);
    Prevention of clotting in arterial and cardiac surgery;
    Prophylaxis and treatment of peripheral arterial embolism;
    Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.
  • 2 DOSAGE AND ADMINISTRATION

         

    2.1 Preparation for Administration

    Confirm the choice of the correct HEPARIN SODIUM INJECTION vial to ensure that the 1 mL vial is not confused with a "catheter lock flush" vial or other 1 mL vial of incorrect strength [see Warnings and Precautions (5.1)]. Confirm the selection of the correct formulation and strength prior to administration of the drug.

    Inspect parenteral drug products visually for particulate matter and discoloration prior to administration, whenever solution and container permit. Use only if solution is clear and the seal is intact. Do not use if solution is discolored or contains a precipitate.

    When HEPARIN SODIUM INJECTION is added to an infusion solution for continuous intravenous (IV) administration, invert the container at least six times to ensure adequate mixing and prevent pooling of the heparin in the solution. Storage of prepared infusion solution should not exceed 4 hours at room temperature or 24 hours at 2° to 8°C (36° to 46°F). HEPARIN SODIUM INJECTION is incompatible with certain substances in solution (e.g., alteplase, amikacin sulfate, atracurium besylate, ciprofloxacin, cytarabine, daunorubicin, droperidol, erythromycin lactobionate, gentamicin sulfate, idarubicin, kanamycin sulfate, mitoxantrone HCl, polymyxin B sulfate, promethazine HCl, streptomycin sulfate, tobramycin sulfate). Consult specialized references to verify with which substances incompatibilities have been noted, as compatibility may depend on concentration, temperature, time, and other variables.

    Administer HEPARIN SODIUM INJECTION by intermittent intravenous injection, intravenous infusion, or deep subcutaneous (intrafat, i.e., above the iliac crest or abdominal fat layer) injection. HEPARIN SODIUM INJECTION is not intended for intramuscular (IM) use [see Adverse Reactions (6.1)].

    2.2 Laboratory Monitoring for Efficacy and Safety

    Adjust the dosage of HEPARIN SODIUM INJECTION according to the patient's coagulation test results. Dosage is considered adequate when the activated partial thromboplastin time (aPTT) is 1.5 to 2 times normal or when the whole blood clotting time is elevated approximately 2.5 to 3 times the control value. When initiating treatment with HEPARIN SODIUM INJECTION by continuous intravenous infusion, determine the coagulation status (aPTT, INR, platelet count) at baseline and continue to follow aPTT approximately every 4 hours and then at appropriate intervals thereafter. When the drug is administered intermittently by intravenous injection, perform coagulation tests before each injection during initiation of treatment and at appropriate intervals thereafter. After deep subcutaneous injections, tests for adequacy of dosage are best performed on samples drawn 4 to 6 hours after the injections.

    Periodically monitor platelet counts, hematocrit, and occult blood in stool during the entire course of HEPARIN SODIUM INJECTION therapy, regardless of the route of administration.

    2.3 Therapeutic Anticoagulant Effect with Full-Dose Heparin

    The dosing recommendations in Table 1 are based on clinical experience. Although dosages must be adjusted for the individual patient according to the results of suitable laboratory tests, the following dosage schedules may be used as guidelines:

    Table 1: Recommended Adult Full-Dose Heparin Regimens for Therapeutic Anticoagulant Effect
    *
    Based on 68 kg patient

    METHOD OF ADMINISTRATION

    FREQUENCY

    RECOMMENDED DOSE*

    Deep Subcutaneous
    (Intrafat) Injection

    Use a different site for each injection to prevent the development of hematoma

    Initial Dose

    333 units/kg subcutaneously

    Every 12 hours

    250 units/kg subcutaneously

    Intermittent Intravenous Injection

    Initial Dose

    10,000 units, either undiluted or in 50 mL to 100 mL of 0.9% Sodium Chloride Injection, USP

    Every 4 to 6 hours

    5,000 units to 10,000 units, either undiluted or in 50 mL to 100 mL of 0.9% Sodium Chloride Injection, USP

    Continuous Intravenous Infusion

    Initial Dose

    5,000 units by intravenous injection

    Continuous

    20,000 units to 40,000 units per 24 hours in 1,000 mL of 0.9% Sodium Chloride Injection, USP (or in any compatible solution) for infusion

    2.4 Pediatric Use

    Use preservative-free HEPARIN SODIUM INJECTION in neonates and infants.

    There are no adequate and well controlled studies on heparin use in pediatric patients. Pediatric dosing recommendations are based on clinical experience. In general, the following dosage schedule may be used as a guideline in pediatric patients:

    Initial Dose

    75 units/kg to 100 units/kg ( intravenous bolus over 10 minutes)

    Maintenance Dose

    Infants: 25 units/kg/hour to 30 units/kg/hour;
             Infants less than 2 months have the highest requirements (average 28 units/kg/hour)

    Children greater than 1 year of age: 18 units/kg/hour to 20 units/kg/hour;
    Older children may require less heparin, similar to weight-adjusted adult dosage

    Monitoring

    Adjust heparin to maintain aPTT of 60 seconds to 85 seconds, assuming this reflects an anti-Factor Xa level of 0.35 to 0.70.

    2.5 Cardiovascular Surgery

    Patients undergoing total body perfusion for open-heart surgery should receive an initial dose of not less than 150 units of heparin sodium per kilogram of body weight. Frequently, a dose of 300 units per kilogram is used for procedures estimated to last less than 60 minutes or 400 units per kilogram for those estimated to last longer than 60 minutes.

    2.6 Low-Dose Prophylaxis of Postoperative Thromboembolism

    The most widely used dosage has been 5,000 units 2 hours before surgery and 5,000 units every 8 to 12 hours thereafter for 7 days or until the patient is fully ambulatory, whichever is longer. Administer the heparin by deep subcutaneous (intrafat, i.e., above the iliac crest or abdominal fat layer, arm, or thigh) injection with a fine (25 to 26-gauge) needle to minimize tissue trauma.

    2.7 Converting to Warfarin

    To ensure continuous anticoagulation when converting from HEPARIN SODIUM INJECTION to warfarin, continue full heparin therapy for several days until the INR (prothrombin time) has reached a stable therapeutic range. Heparin therapy may then be discontinued without tapering [see Drug Interactions (7.1)].

    2.8 Converting to Oral Anticoagulants other than Warfarin

    For patients currently receiving intravenous heparin, stop intravenous infusion of heparin sodium immediately after administering the first dose of oral anticoagulant; or for intermittent intravenous administration of heparin sodium, start oral anticoagulant 0 to 2 hours before the time that the next dose of heparin was to have been administered.

    2.9 Extracorporeal Dialysis

    Follow equipment manufacturers' operating directions carefully. A dose of 25 units/kg to 30 units/kg followed by an infusion rate of 1,500 units/hour to 2,000 units/hour is suggested based on pharmacodynamic data if specific manufacturers' recommendations are not available.

  • 3 DOSAGE FORMS AND STRENGTHS

    HEPARIN SODIUM INJECTION is available as:

    1,000 USP units/mL preservative-free, single-dose
              Vial: 2,000 USP units/2 mL
    1,000 USP units/mL preserved with benzyl alcohol, multiple-dose
              Vial: 10,000 USP units/10 mL
              Vial: 30,000 USP units/30 mL
    5,000 USP units/mL preserved with benzyl alcohol, multiple-dose
              Vial: 50,000 USP units/10 mL
              Vial: 5,000 USP units/1 mL
    10,000 USP units/mL preserved with benzyl alcohol, multiple-dose
              Vial: 10,000 USP units/1 mL
  • 4 CONTRAINDICATIONS

    The use of HEPARIN SODIUM INJECTION is contraindicated in patients:

    History of heparin-induced thrombocytopenia and heparin-induced thrombocytopenia and thrombosis
    History of thrombocytopenia with pentosan polysulfate
    Known hypersensitivity to heparin or pork products (e.g., anaphylactoid reactions) [see Adverse Reactions (6.1)]
    In whom suitable blood coagulation tests (e.g., whole-blood clotting time, partial thromboplastin time) cannot be performed at appropriate intervals. This contraindication refers to full-dose heparin regimens only; there is usually no need to monitor coagulation parameters in patients receiving low-dose heparin
    An uncontrollable bleeding state [see Warnings and Precautions (5.2)], except when this is due to disseminated intravascular coagulation
  • 5 WARNINGS AND PRECAUTIONS

         

    5.1 Fatal Medication Errors

    Do not use HEPARIN SODIUM INJECTION as a "catheter lock flush" product. HEPARIN SODIUM INJECTION is supplied in vials containing various strengths of heparin, including vials that contain a highly concentrated solution of 10,000 units in 1 mL. Fatal hemorrhages have occurred due to medication errors. Carefully examine all HEPARIN SODIUM INJECTION vials to confirm the correct vial choice prior to administration of the drug.

    5.2 Hemorrhage

    Avoid using heparin in the presence of major bleeding, except when the benefits of heparin therapy outweigh the potential risks.

    Hemorrhage, including fatal events, has occurred in patients receiving heparin. Hemorrhage can occur at virtually any site in patients receiving heparin. Adrenal hemorrhage (with resultant acute adrenal insufficiency), ovarian hemorrhage, and retroperitoneal hemorrhage have occurred during anticoagulant therapy with heparin [see Adverse Reactions (6.1]). A higher incidence of bleeding has been reported in patients, particularly women, over 60 years of age [see Clinical Pharmacology (12.3)]. An unexplained fall in hematocrit or fall in blood pressure should lead to serious consideration of a hemorrhagic event.

    Use heparin sodium with caution in disease states in which there is increased risk of hemorrhage, including:

    Cardiovascular – Subacute bacterial endocarditis, severe hypertension.
    Surgical – During and immediately following: (a) spinal puncture or spinal anesthesia or (b) major surgery, especially involving the brain, spinal cord, or eye.
    Hematologic – Conditions associated with increased bleeding tendencies, such as hemophilia, thrombocytopenia, and some vascular purpuras.
    Patients with hereditary antithrombin III deficiency receiving concurrent antithrombin III therapy – The anticoagulant effect of heparin is enhanced by concurrent treatment with antithrombin III (human) in patients with hereditary antithrombin III deficiency. To reduce the risk of bleeding, reduce the heparin dose during concomitant treatment with antithrombin III (human).
    Gastrointestinal – Ulcerative lesions, continuous tube drainage of the stomach or small intestine, and clinical settings in which stress-induced gastrointestinal hemorrhage is possible.
    Other – Menstruation, liver disease with impaired hemostasis, severe renal disease, or in patients with indwelling catheters.

    5.3 Heparin-Induced Thrombocytopenia and Heparin-Induced Thrombocytopenia and Thrombosis

    Heparin-induced thrombocytopenia (HIT) is a serious antibody-mediated reaction resulting from irreversible aggregation of platelets. HIT occurs in patients treated with heparin and is due to the development of antibodies to a platelet Factor 4-heparin complex that induce in vivo platelet aggregation. HIT may progress to the development of venous and arterial thromboses, a condition known as heparin-induced thrombocytopenia and thrombosis (HITT). Thrombotic events may also be the initial presentation for HITT. These serious thromboembolic events include deep vein thrombosis, pulmonary embolism, cerebral vein thrombosis, limb ischemia, stroke, myocardial infarction, mesenteric thrombosis, renal arterial thrombosis, skin necrosis, gangrene of the extremities that may lead to amputation, and possibly death. Monitor thrombocytopenia of any degree closely. If the platelet count falls below 100,000/mm3 or if recurrent thrombosis develops, promptly discontinue heparin, evaluate for HIT and HITT, and, if necessary, administer an alternative anticoagulant. HIT and HITT can occur up to several weeks after the discontinuation of heparin therapy. Patients presenting with thrombocytopenia or thrombosis after discontinuation of heparin should be evaluated for HIT and HITT.

    5.4 Risk of Serious Adverse Reactions in Infants due to Benzyl Alcohol Preservative

    Use preservative-free HEPARIN SODIUM INJECTION in neonates and infants.

    Serious and fatal adverse reactions including "gasping syndrome" can occur in neonates and low-birth weight infants treated with benzyl alcohol-preserved formulation in infusion solutions, including HEPARIN SODIUM INJECTION. The "gasping syndrome" is characterized by central nervous system depression, metabolic acidosis, and gasping respirations.

    When prescribing HEPARIN SODIUM INJECTION in infants consider the combined daily metabolic load of benzyl alcohol from all sources including HEPARIN SODIUM INJECTION (HEPARIN SODIUM INJECTION contains 9.45 mg of benzyl alcohol per mL) and other drugs containing benzyl alcohol. The minimum amount of benzyl alcohol at which toxicity may occur is not known [see Use in Specific Populations (8.4)].

    5.5 Thrombocytopenia

    Thrombocytopenia in patients receiving heparin has been reported at frequencies up to 30%. It can occur 2 to 20 days (average 5 to 9) following the onset of heparin therapy. Obtain platelet counts before and periodically during heparin therapy. Monitor thrombocytopenia of any degree closely. If the count falls below 100,000/mm3 or if recurrent thrombosis develops, promptly discontinue heparin, evaluate for HIT and HITT, and, if necessary, administer an alternative anticoagulant [see Warnings and Precautions (5.3)].

    5.6 Coagulation Testing and Monitoring

    When using a full dose heparin regimen, adjust the heparin dose based on frequent blood coagulation tests. If the coagulation test is unduly prolonged or if hemorrhage occurs, discontinue heparin promptly [see Overdosage (10)]. Periodically monitor platelet counts, hematocrit, and occult blood in stool during the entire course of heparin therapy, regardless of the route of administration [see Dosage and Administration (2.2)].

    5.7 Heparin Resistance

    Resistance to heparin is frequently encountered in fever, thrombosis, thrombophlebitis, infections with thrombosing tendencies, myocardial infarction, cancer, in postsurgical patients, and patients with antithrombin III deficiency. Close monitoring of coagulation tests is recommended in these cases. Adjustment of heparin doses based on anti-Factor Xa levels may be warranted.

    5.8 Hypersensitivity

    Patients with documented hypersensitivity to heparin should be given the drug only in clearly life-threatening situations.

    Because HEPARIN SODIUM INJECTION is derived from animal tissue, it should be used with caution in patients with a history of allergy.

    5.9 Hyperkalemia

    Heparin can suppress adrenal secretion of aldosterone leading to hyperkalemia, particularly in patients with diabetes mellitus, chronic renal failure, pre-existing metabolic acidosis, a raised plasma potassium, or taking potassium sparing drugs. The risk of hyperkalemia appears to increase with duration of therapy but is usually reversible upon discontinuation of heparin.

    Measure blood potassium in patients at risk of hyperkalemia before starting heparin therapy and periodically in all patients treated for more than 5 days or earlier as deemed fit by the clinician.

  • 6 ADVERSE REACTIONS

    The following clinically significant adverse reactions are described elsewhere in the labeling:

    Hemorrhage [see Warnings and Precautions (5.2)]
    Heparin-Induced Thrombocytopenia and Heparin-Induced Thrombocytopenia and Thrombosis [see Warnings and Precautions (5.3)]
    Risk of Serious Adverse Reactions in Infants due to Benzyl Alcohol Preservative [see Warnings and Precautions (5.4)]
    Thrombocytopenia [see Warnings and Precautions (5.5)]
    Heparin Resistance [see Warnings and Precautions (5.7)]
    Hypersensitivity [see Warnings and Precautions (5.8)]
    Hyperkalemia [see Warnings and Precautions (5.9)]

    6.1 Postmarketing Experience

    The following adverse reactions have been identified during post approval use of HEPARIN SODIUM INJECTION. Because these reactions are reported voluntarily from a population of uncertain size, it is not always possible to reliably estimate their frequency.

    Hemorrhage – Hemorrhage is the chief complication that may result from heparin therapy [see Warnings and Precautions (5.2)]. Gastrointestinal or urinary tract bleeding during anticoagulant therapy may indicate the presence of an underlying occult lesion. Bleeding can occur at any site but certain specific hemorrhagic complications may be difficult to detect including:
    -
    Adrenal hemorrhage, with resultant acute adrenal insufficiency, has occurred with heparin therapy, including fatal cases.
    -
    Ovarian (corpus luteum) hemorrhage developed in a number of women of reproductive age receiving short- or long-term heparin therapy.
    -
    Retroperitoneal hemorrhage.
    HIT and HITT, including delayed onset cases [see Warnings and Precautions (5.3)].
    Local irritation – Local irritation, erythema, mild pain, hematoma, or ulceration have occurred following deep subcutaneous (intrafat) injection of heparin sodium. Because such reactions occur more frequently after intramuscular administration, the IM route is not recommended.
    Histamine-like reactions – Such reactions have been observed at the site of injection. Necrosis of the skin has been reported at the site of subcutaneous injection of heparin, occasionally requiring skin grafting [see Warnings and Precautions (5.3)].
    Hypersensitivity – Generalized hypersensitivity reactions have been reported with chills, fever, and urticaria as the most usual manifestations; asthma, rhinitis, lacrimation, headache, nausea and vomiting, and anaphylactoid reactions, including shock, occur less frequently. Itching and burning, especially on the plantar site of the feet, may occur.
    Metabolism and Nutrition Disorders – Hyperkalemia.
    Elevations of serum aminotransferases – Significant elevations of aspartate aminotransferase (AST) and alanine aminotransferase (ALT) levels have occurred in patients who have received heparin.
    Others – Osteoporosis following long-term administration of high doses of heparin, cutaneous necrosis after systemic administration, suppression of aldosterone synthesis, delayed transient alopecia, priapism, and rebound hyperlipemia on discontinuation of heparin sodium have been reported.
  • 7 DRUG INTERACTIONS

    7.1 Oral Anticoagulants

    Heparin sodium may prolong the one-stage prothrombin time. Therefore, when heparin sodium is given with dicumarol or warfarin sodium, a period of at least 5 hours after the last intravenous dose or 24 hours after the last subcutaneous dose should elapse before blood is drawn if a valid prothrombin time is to be obtained.

    7.2 Platelet Inhibitors

    Drugs such as NSAIDs (including salicylic acid, ibuprofen, indomethacin, and celecoxib), dextran, phenylbutazone, thienopyridines, dipyridamole, hydroxychloroquine, glycoprotein IIb/IIIa antagonists (including abciximab, eptifibatide, and tirofiban), and others that interfere with platelet-aggregation reactions (the main hemostatic defense of heparinized patients) may induce bleeding and should be used with caution in patients receiving heparin sodium.

    7.3 Other Interactions

    Digitalis, tetracyclines, nicotine, or antihistamines, or intravenous (IV) nitroglycerin may partially counteract the anticoagulant action of heparin sodium.

    Antithrombin III (human) – The anticoagulant effect of heparin is enhanced by concurrent treatment with antithrombin III (human) in patients with hereditary antithrombin III deficiency. To reduce the risk of bleeding, a reduced dosage of heparin is recommended during treatment with antithrombin III (human).

  • 8 USE IN SPECIFIC POPULATIONS

    8.1 Pregnancy

    Risk Summary

    There are no available data on heparin sodium use in pregnant women to infor a drug associated risk of major birth defects and miscarriage. In published reports, heparin exposure during pregnancy did not show evidence of an increased risk of adverse maternal or fetal outcomes in humans. No teratogenicity, but early embryo-fetal death was observed in animal reproductive studies with administration of heparin sodium to pregnant rats and rabbits during organogenesis at doses approximately 10 times the maximum recommended human dose (MRHD) of 40,000 USP units/24 hours infusion (see Data). Consider the benefits and risks of HEPARIN SODIUM INJECTION to a pregnant woman and possible risks to the fetus when prescribing HEPARIN SODIUM INJECTION to a pregnant woman.

    If available, preservative-free HEPARIN SODIUM INJECTION is recommended when heparin therapy is needed during pregnancy. There are no known adverse outcomes associated with fetal exposure to the preservative benzyl alcohol through maternal drug administration; however, the preservative benzyl alcohol can cause serious adverse events and death when administered intravenously to neonates and infants [see Use in Specific Populations (8.4)].

    The estimated background risk of major birth defects and miscarriage for the indicated population is unknown. All pregnancies have a risk of birth defect, loss, or other adverse outcomes. In the U.S. general population, the estimated background risk of major birth defects and miscarriage in clinically recognized pregnancies is 2–4% and 15–20%, respectively.

    Data

    Human Data

    The maternal and fetal outcomes associated with uses of heparin via various dosing methods and administration routes during pregnancy have been investigated in numerous studies. These studies generally reported normal deliveries with no maternal or fetal bleeding and no other complications.

    Animal Data

    In a published study conducted in rats and rabbits, pregnant animals received heparin intravenously during organogenesis at a dose of 10,000 units/kg/day, approximately 10 times the maximum human daily dose based on body weight. The number of early resorptions increased in both species. There was no evidence of teratogenic effects.

    8.2 Lactation

    Risk Summary

    There is no information regarding the presence of heparin in human milk, the effects on the breastfed child, or the effects on milk production. Due to its large molecular weight, heparin is not likely to be excreted in human milk, and any heparin in milk would not be orally absorbed by a breastfed child. The developmental and health benefits of breastfeeding should be considered along with the mother's clinical need for HEPARIN SODIUM INJECTION and any potential adverse effects on the breastfed child from HEPARIN SODIUM INJECTION or from the underlying maternal condition. Benzyl alcohol present in maternal serum is likely to cross into human milk and may be orally absorbed by a nursing infant [see Use in Specific Populations (8.4)].

    8.4 Pediatric Use

    There are no adequate and well controlled studies on heparin use in pediatric patients. Pediatric dosing recommendations are based on clinical experience [see Dosage and Administration (2.4)].

    Carefully examine all HEPARIN SODIUM INJECTION vials to confirm choice of the correct strength prior to administration of the drug. Pediatric patients, including neonates, have died as a result of medication errors [see Warnings and Precautions (5.1)].

    Benzyl Alcohol Toxicity

    Use preservative-free HEPARIN SODIUM INJECTION in neonates and infants.

    Serious adverse reactions including fatal reactions and the "gasping syndrome" occurred in premature neonates and low-birth weight infants in the neonatal intensive care unit who received benzyl alcohol as a preservative in infusion solutions. In these cases, benzyl alcohol dosages of 99 to 234 mg/kg/day produced high levels of benzyl alcohol and its metabolites in the blood and urine (blood levels of benzyl alcohol were 0.61 to 1.378 mmol/L). Additional adverse reactions included gradual neurological deterioration, seizures, intracranial hemorrhage, hematologic abnormalities, skin breakdown, hepatic and renal failure, hypotension, bradycardia, and cardiovascular collapse. Preterm, low-birth weight infants may be more likely to develop these reactions because they may be less able to metabolize benzyl alcohol.

    When prescribing HEPARIN SODIUM INJECTION in infants consider the combined daily metabolic load of benzyl alcohol from all sources including HEPARIN SODIUM INJECTION (HEPARIN SODIUM INJECTION contains 9.45 mg of benzyl alcohol) and other drugs containing benzyl alcohol. The minimum amount of benzyl alcohol at which serious adverse reactions may occur is not known [see Warnings and Precautions (5.4)].

    8.5 Geriatric Use

    There are limited adequate and well-controlled studies in patients 65 years and older, however a higher incidence of bleeding has been reported in patients over 60 years of age, especially women [see Warnings and Precautions (5.2)]. Lower doses of heparin may be indicated in these patients [see Clinical Pharmacology (12.3)].

  • 10 OVERDOSAGE

    Bleeding is the chief sign of heparin overdosage.

    Neutralization of Heparin Effect

    When clinical circumstances (bleeding) require reversal of the heparin effect, protamine sulfate (1% solution) by slow infusion will neutralize heparin sodium. No more than 50 mg should be administered, very slowly, in any 10 minute period. Each mg of protamine sulfate neutralizes approximately 100 USP heparin units. The amount of protamine required decreases over time as heparin is metabolized. Although the metabolism of heparin is complex, it may, for the purpose of choosing a protamine dose, be assumed to have a half-life of about 30 minutes after intravenous injection. Because fatal reactions often resembling anaphylaxis have been reported with protamine, it should be given only when resuscitation techniques and treatment of anaphylactoid shock are readily available. For additional information, consult the prescribing information for protamine sulfate injection.

  • 11 DESCRIPTION

    Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucuronic acid).

    Structure of heparin sodium (representative subunits):

    Chemical Structure

    HEPARIN SODIUM INJECTION is a sterile preparation of heparin sodium derived from porcine intestinal tissue, standardized for anticoagulant activity, in water for injection. It is intended for intravenous or deep subcutaneous administration. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram.

    For formulations preserved with benzyl alcohol, each mL of the 1,000 UPS units and 5,000 USP units per mL preparations contains: heparin sodium 1,000 UPS units or 5,000 USP units; 9 mg sodium chloride; 9.45 mg benzyl alcohol added as preservative. Each mL of the 10,000 USP units per mL preparations contains: heparin sodium 10,000 USP units; 9.45 mg benzyl alcohol added as preservative.

    The preservative-free product contains (per mL): 1,000 USP units of heparin sodium and 9 mg sodium chloride.

    When necessary, the pH of HEPARIN SODIUM INJECTION is adjusted with hydrochloric acid and/or sodium hydroxide. The pH range is 5.0 to 7.5.

  • 12 CLINICAL PHARMACOLOGY

         

    12.1 Mechanism of Action

    Heparin interacts with the naturally occurring plasma protein, Antithrombin III, to induce a conformational change, which markedly enhances the serine protease activity of Antithrombin III, thereby inhibiting the activated coagulation factors involved in the clotting sequence, particularly Xa and IIa. Small amounts of heparin inhibit Factor Xa, and larger amounts inhibit thrombin (Factor IIa). Heparin also prevents the formation of a stable fibrin clot by inhibiting the activation of the fibrin stabilizing factor. Heparin does not have fibrinolytic activity; therefore, it will not lyse existing clots.

    12.2 Pharmacodynamics

    Various times (activated clotting time, activated partial thromboplastin time, prothrombin time, whole blood clotting time) are prolonged by full therapeutic doses of heparin; in most cases, they are not measurably affected by low doses of heparin. The bleeding time is usually unaffected by heparin.

    12.3 Pharmacokinetics

         

    Absorption

    Heparin is not absorbed through the gastrointestinal tract and therefore administered via parenteral route. Peak plasma concentration and the onset of action are achieved immediately after intravenous administration.

    Distribution

    Heparin is highly bound to antithrombin, fibrinogens, globulins, serum proteases and lipoproteins. The volume of distribution is 0.07 L/kg.

    Elimination

    Metabolism

    Heparin does not undergo enzymatic degradation.

    Excretion

    Heparin is mainly cleared from the circulation by liver and reticuloendothelial cells mediated uptake into extravascular space. Heparin undergoes biphasic clearance, a) rapid saturable clearance (zero order process due to binding to proteins, endothelial cells and macrophage) and b) slower first order elimination. The plasma half-life is dose-dependent and it ranges from 0.5 to 2 h.

    Specific Populations

    Geriatric patients

    Patients over 60 years of age, following similar doses of heparin, may have higher plasma levels of heparin and longer activated partial thromboplastin times (aPTTs) compared with patients under 60 years of age [see Use in Specific Populations (8.5)].

  • 13 NONCLINICAL TOXICOLOGY

    13.1 Carcinogenesis, Mutagenesis, Impairment of Fertility

    No long-term studies in animals have been performed to evaluate carcinogenic potential of heparin. No studies in animals have been performed addressing mutagenesis or impairment of fertility.

  • 16 HOW SUPPLIED/STORAGE AND HANDLING

    HEPARIN SODIUM INJECTION preservative-free is available in the following strengths and package sizes:

    *
    Discard unused portion

    DESCRIPTION

    NDC

    1,000 USP units/mL

         Preservative-free, 25 vials: 2,000 USP units/2 mL, single-dose*

    0069-0043-01

    HEPARIN SODIUM INJECTION preserved with benzyl alcohol is available in the following strengths and package sizes:

    DESCRIPTION

    NDC

    1,000 USP units/mL

         25 vials: 10,000 USP units/10 mL, multiple-dose

    0069-0058-01

         10 vials: 30,000 USP units/30 mL, multiple-dose

    0069-0137-03

    5,000 USP units/mL

         25 vials: 50,000 USP units/10 mL, multiple-dose

    0069-0059-01

         25 vials: 5,000 USP units/1 mL, multiple-dose

    0069-0059-03

    10,000 USP units/mL

         25 vials: 10,000 USP units/1 mL, multiple-dose

    0069-0062-01

    Store at 20° to 25°C (68° to 77°F) [see USP Controlled Room Temperature]. Use only if solution is clear and the seal is intact. Do not use if solution is discolored or contains a precipitate.

  • 17 PATIENT COUNSELING INFORMATION

         

    Hemorrhage

    Inform patients that it may take them longer than usual to stop bleeding, that they may bruise and/or bleed more easily when they are treated with heparin, and that they should report any unusual bleeding or bruising to their physician. Hemorrhage can occur at virtually any site in patients receiving heparin. Fatal hemorrhages have occurred [see Warnings and Precautions (5.2)].

    Prior to Surgery

    Advise patients to inform physicians and dentists that they are receiving heparin before any surgery is scheduled [see Warnings and Precautions (5.2)].

    Heparin-Induced Thrombocytopenia

    Inform patients of the risk of heparin-induced thrombocytopenia (HIT). HIT may progress to the development of venous and arterial thromboses, a condition known as heparin-induced thrombocytopenia and thrombosis (HITT). HIT and HITT can occur up to several weeks after the discontinuation of heparin therapy [see Warnings and Precautions (5.3)].

    Hypersensitivity

    Inform patients that generalized hypersensitivity reactions have been reported. Necrosis of the skin has been reported at the site of subcutaneous injection of heparin [see Warnings and Precautions (5.8), Adverse Reactions (6.1)].

    Other Medications

    Because of the risk of hemorrhage, advise patients to inform their physicians and dentists of all medications they are taking, including non-prescription medications, and before starting any new medication [see Drug Interactions (7.1)].

  • SPL UNCLASSIFIED SECTION

    Logo

    LAB-0414-8.0

  • PRINCIPAL DISPLAY PANEL - 10,000 USP units/10 mL Multidose Vial Label

    NDC 0069-0058-02

    Multidose Vial

    Heparin
    Sodium Injection, USP

    10,000 USP units /
    10 mL
    (1,000 USP units/mL)

    Warning: Contains
    Benzyl Alcohol

    Rx only

    PRINCIPAL DISPLAY PANEL - 10,000 USP units/10 mL Multidose Vial Label
  • PRINCIPAL DISPLAY PANEL - 10,000 USP units/10 mL Multidose Vial Carton

    NDC 0069-0058-01
    Contains 25 of NDC 0069-0058-02
    Rx only

    Twenty-five—10 mL Multidose Vials

    Heparin
    Sodium Injection, USP

    10,000 USP units/10 mL
    (1,000 USP units per mL)

    Derived from porcine intestinal tissue

    For subcutaneous or intravenous use

    Warning: Contains Benzyl Alcohol

    NOT for Lock Flush

    Pfizer Injectables

    PRINCIPAL DISPLAY PANEL - 10,000 USP units/10 mL Multidose Vial Carton
  • PRINCIPAL DISPLAY PANEL - 50,000 USP units/10 mL Multidose Vial Label

    NDC 0069-0059-02

    Multidose Vial

    Heparin
    Sodium Injection, USP

    50,000 USP units /
    10 mL
    (1,000 USP units/mL)

    Warning: Contains
    Benzyl Alcohol

    Rx only

    PRINCIPAL DISPLAY PANEL - 50,000 USP units/10 mL Multidose Vial Label
  • PRINCIPAL DISPLAY PANEL - 50,000 USP units/10 mL Multidose Vial Carton

    NDC 0069-0059-01
    Contains 25 of NDC 0069-0059-02
    Rx only

    Twenty-five—10 mL Multidose Vials

    Heparin
    Sodium Injection, USP

    50,000 USP units/10 mL
    (5,000 USP units per mL)

    Derived from porcine intestinal tissue

    For subcutaneous or intravenous use

    Warning: Contains Benzyl Alcohol

    NOT for Lock Flush

    Pfizer Injectables

    PRINCIPAL DISPLAY PANEL - 50,000 USP units/10 mL Multidose Vial Carton
  • PRINCIPAL DISPLAY PANEL - 1 mL Multidose Vial Label

    NDC 0069-0062-02

    Multidose Vial

    Heparin
    Sodium Injection, USP

    10,000 USP units / mL

    Warning: Contains
    Benzyl Alcohol

    Rx only

    PRINCIPAL DISPLAY PANEL - 1 mL Multidose Vial Label Multidose Vial Label
  • PRINCIPAL DISPLAY PANEL - 1 mL Multidose Vial Carton

    NDC 0069-0062-01
    Contains 25 of
    NDC 0069-0062-02
    Rx only

    Twenty-five—1 mL Multidose Vials

    Heparin
    Sodium Injection, USP

    10,000 USP units /mL

    Derived from porcine intestinal tissue

    For subcutaneous or intravenous use

    Warning: Contains Benzyl Alcohol

    Pfizer Injectables

    NOT for Lock Flush

    PRINCIPAL DISPLAY PANEL - 1 mL Multidose Vial Carton
  • PRINCIPAL DISPLAY PANEL - 2 mL Single Dose Vial Label

    NDC 0069-0043-02

    Single Dose Vial

    Heparin
    Sodium Injection, USP

    2,000 USP units / 2 mL
    (1,000 USP units/mL)

    Preservative-Free
    Rx only

    PRINCIPAL DISPLAY PANEL - 2 mL Single Dose Vial Label
  • PRINCIPAL DISPLAY PANEL - 2 mL Single Dose Vial Carton

    NDC 0069-0043-01
    Contains 25 of
    NDC 0069-0043-02
    Rx only

    Twenty-five—2 mL Single Dose Vials

    Heparin
    Sodium Injection, USP

    2,000 USP units /2 mL
    (1,000 USP units per mL)

    Derived from porcine intestinal tissue

    For subcutaneous or intravenous use

    Pfizer Injectables

    Preservative-Free

    NOT for Lock Flush

    PRINCIPAL DISPLAY PANEL - 2 mL Single Dose Vial Carton
  • PRINCIPAL DISPLAY PANEL - 30 mL Multidose Vial Label

    NDC 0069-0137-01

    HEPARIN
    Sodium Injection, USP

    30,000 USP units/30 mL
    (1,000 USP units/mL)

    Warning: Contains Benzyl Alcohol

    Multidose Vial

    NOT for Lock Flush

    PRINCIPAL DISPLAY PANEL - 30 mL Multidose Vial Label
  • PRINCIPAL DISPLAY PANEL - 30 mL Vial Carton

    Ten—30 mL Multidose Vials

    NDC 0069-0137-03
    Contains 10 of
    NDC 0069-0137-01

    HEPARIN
    Sodium Injection, USP

    30,000 USP units/30 mL
    (1,000 USP units per mL)

    Derived from porcine intestinal tissue

    For subcutaneous or intravenous use

    Pfizer Injectables

    Warning: Contains Benzyl Alcohol

    NOT for Lock Flush

    Rx only

    Multidose Vials

    PRINCIPAL DISPLAY PANEL - 30 mL Vial Carton
  • INGREDIENTS AND APPEARANCE
    HEPARIN SODIUM 
    heparin sodium injection
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:0069-0058
    Route of AdministrationINTRAVENOUS, SUBCUTANEOUS
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    HEPARIN SODIUM (UNII: ZZ45AB24CA) (HEPARIN - UNII:T2410KM04A) HEPARIN1000 [USP'U]  in 1 mL
    Inactive Ingredients
    Ingredient NameStrength
    SODIUM CHLORIDE (UNII: 451W47IQ8X) 9 mg  in 1 mL
    BENZYL ALCOHOL (UNII: LKG8494WBH) 9.45 mg  in 1 mL
    HYDROCHLORIC ACID (UNII: QTT17582CB)  
    SODIUM HYDROXIDE (UNII: 55X04QC32I)  
    WATER (UNII: 059QF0KO0R)  
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:0069-0058-0125 in 1 CONTAINER07/21/2011
    1NDC:0069-0058-0210 mL in 1 VIAL; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    NDANDA20137007/21/2011
    HEPARIN SODIUM 
    heparin sodium injection
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:0069-0059
    Route of AdministrationINTRAVENOUS, SUBCUTANEOUS
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    HEPARIN SODIUM (UNII: ZZ45AB24CA) (HEPARIN - UNII:T2410KM04A) HEPARIN5000 [USP'U]  in 1 mL
    Inactive Ingredients
    Ingredient NameStrength
    SODIUM CHLORIDE (UNII: 451W47IQ8X) 9 mg  in 1 mL
    BENZYL ALCOHOL (UNII: LKG8494WBH) 9.45 mg  in 1 mL
    HYDROCHLORIC ACID (UNII: QTT17582CB)  
    SODIUM HYDROXIDE (UNII: 55X04QC32I)  
    WATER (UNII: 059QF0KO0R)  
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:0069-0059-0125 in 1 CONTAINER07/21/2011
    1NDC:0069-0059-0210 mL in 1 VIAL; Type 0: Not a Combination Product
    2NDC:0069-0059-0325 in 1 CONTAINER06/11/2019
    2NDC:0069-0059-041 mL in 1 VIAL; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    NDANDA20137007/21/2011
    HEPARIN SODIUM 
    heparin sodium injection
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:0069-0062
    Route of AdministrationINTRAVENOUS, SUBCUTANEOUS
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    HEPARIN SODIUM (UNII: ZZ45AB24CA) (HEPARIN - UNII:T2410KM04A) HEPARIN10000 [USP'U]  in 1 mL
    Inactive Ingredients
    Ingredient NameStrength
    SODIUM CHLORIDE (UNII: 451W47IQ8X) 9 mg  in 1 mL
    BENZYL ALCOHOL (UNII: LKG8494WBH) 9.45 mg  in 1 mL
    HYDROCHLORIC ACID (UNII: QTT17582CB)  
    SODIUM HYDROXIDE (UNII: 55X04QC32I)  
    WATER (UNII: 059QF0KO0R)  
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:0069-0062-0125 in 1 CONTAINER07/21/201112/31/2018
    1NDC:0069-0062-021 mL in 1 VIAL; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    NDANDA20137007/21/201112/31/2018
    HEPARIN SODIUM 
    heparin sodium injection
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:0069-0043
    Route of AdministrationINTRAVENOUS, SUBCUTANEOUS
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    HEPARIN SODIUM (UNII: ZZ45AB24CA) (HEPARIN - UNII:T2410KM04A) HEPARIN1000 [USP'U]  in 1 mL
    Inactive Ingredients
    Ingredient NameStrength
    SODIUM CHLORIDE (UNII: 451W47IQ8X) 9 mg  in 1 mL
    WATER (UNII: 059QF0KO0R)  
    HYDROCHLORIC ACID (UNII: QTT17582CB)  
    SODIUM HYDROXIDE (UNII: 55X04QC32I)  
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:0069-0043-0125 in 1 CONTAINER02/18/2020
    1NDC:0069-0043-022 mL in 1 VIAL; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    NDANDA20137007/21/2011
    HEPARIN SODIUM 
    heparin sodium injection
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:0069-0137
    Route of AdministrationINTRAVENOUS, SUBCUTANEOUS
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    HEPARIN SODIUM (UNII: ZZ45AB24CA) (HEPARIN - UNII:T2410KM04A) HEPARIN1000 [USP'U]  in 1 mL
    Inactive Ingredients
    Ingredient NameStrength
    SODIUM CHLORIDE (UNII: 451W47IQ8X)  
    BENZYL ALCOHOL (UNII: LKG8494WBH)  
    HYDROCHLORIC ACID (UNII: QTT17582CB)  
    SODIUM HYDROXIDE (UNII: 55X04QC32I)  
    WATER (UNII: 059QF0KO0R)  
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:0069-0137-0310 in 1 CARTON03/11/2013
    1NDC:0069-0137-0130 mL in 1 VIAL; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    NDANDA20137003/11/2013
    Labeler - Pfizer Laboratories Div Pfizer Inc (134489525)
    Establishment
    NameAddressID/FEIBusiness Operations
    Pharmacia & Upjohn Company LLC618054084MANUFACTURE(0069-0058, 0069-0059, 0069-0062, 0069-0043, 0069-0137) , PACK(0069-0058, 0069-0059, 0069-0062, 0069-0043, 0069-0137) , LABEL(0069-0058, 0069-0059, 0069-0062, 0069-0043, 0069-0137) , ANALYSIS(0069-0058, 0069-0059, 0069-0062, 0069-0043, 0069-0137)
    Establishment
    NameAddressID/FEIBusiness Operations
    Pharmacia Hepar LLC030945307API MANUFACTURE(0069-0058, 0069-0059, 0069-0062, 0069-0043, 0069-0137) , ANALYSIS(0069-0058, 0069-0059, 0069-0062, 0069-0043, 0069-0137)