Label: SODIUM PHOSPHATES- sodium phosphate, monobasic, monohydrate injection, solution

3 mmol P and 4 mEq Na+/ mL

FOR ADDITIVE USE ONLY AFTER DILUTION IN IV FLUIDS

Sodium Phosphates Injection, USP, 3 mmol/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in Water for Injection.

The solution is administered after dilution by the intravenous route as an electrolyte replenisher.   It must not be administered undiluted.

Each mL contains: Monobasic sodium phosphate, monohydrate, 276 mg; dibasic sodium phosphate, anhydrous, 142 mg (equivalent to dibasic sodium phosphate, heptahydrate, 268 mg); Water for Injection q.s.  In the 5 mL and 15 mL product, phosphoric acid and/or NaOH may have been added for pH adjustment.

Each mL provides 3 mmol of phosphorus and 4 mEq sodium.  It contains no bacteriostat, antimicrobial agent or added buffer.  The pH is 5.7 (approx.).  The osmolar concentration is 7 mOsmol/mL (calc.)

The solution is intended as an alternative to potassium phosphate to provide phosphate ion (PO 43-) for addition to large volume infusion fluids for intravenous use.

Sodium Phosphates, USP, monohydrate monobasic is chemically designated NaH 2PO 4 • H 2O.  Occurs as white, odorless crystals or granules freely soluble in water.

Dibasic Sodium Phosphate, USP, anhydrous, is chemically designated Na 2HPO 4.  Occurs as a colorless or white granular salt freely soluble in water.

Phosphorus in the form of organic and inorganic phosphate has a variety of important biochemical functions in the body and is involved in many significant metabolic and enzyme reactions in almost all organs and tissues.  It exerts a modifying influence on the steady state of calcium levels, a buffering effect on acid-base equilibrium and a primary role in the renal excretion of hydrogen ion.

Phosphorus is present in plasma and other extracellular fluid, in cell membranes and intracellular fluid, as well as in collagen and bone tissues.  Phosphate in the extracellular fluid is primarily in inorganic form and plasma levels may vary somewhat with age.  The ratio of disodium phosphate and monosodium phosphate in the extracellular fluid is 4 to 1 (80% to 20%) at the normal pH of 7.4.  This buffer ratio varies with the pH, but owing to its relatively low concentration, it contributes little to the buffering capacity of the extracellular fluid.

Phosphate, present in large amounts in erythrocytes and other tissue cells, plays a significant intracellular role in the synthesis of high energy organic phosphates.  It has been shown to be essential to maintain red cell glucose utilization, lactate production, and the concentration of both erythrocyte adenosine triphosphate (ATP) and 2,3 diphosphoglycerate (DPG), and must be deemed as important to other tissue cells.  Hypophosphatemia should be avoided during periods of total parenteral nutrition (TPN), or other lengthy periods of intravenous infusions.  It has been suggested that patients receiving TPN receive 20 mEq phosphate (13 mmol phosphate)/1000 kcal from dextrose.  Serum phosphate levels should be regularly monitored and appropriate amounts of phosphate should be added to the infusions to maintain normal serum phosphate levels.  Intravenous infusion of inorganic phosphate may be accompanied by a decrease in the serum level and urinary excretion of calcium.  The normal level of serum inorganic phosphate is 3 to 4.5 mg/100 mL in adults; 4 to 7 mg/100 mL in children.

Intravenously infused phosphate not taken up by the tissues is excreted almost entirely in the urine.  Plasma phosphate is believed to be filterable by the renal glomeruli, and the major portion of filtered phosphate (greater than 80%) is actively reabsorbed by the tubules.  Many modifying influences tend to alter the amount excreted in the urine.

Sodium is the principal cation of extracellular fluid.  It comprises more than 90% of the total cations at its normal plasma concentration of approximately 142 mEq/L.  While the sodium ion can diffuse across cell membranes, intracellular sodium is maintained at a much lower concentration than extracellular sodium through the expenditure of energy by the cell (so-called ‘‘sodium cation pump’’).  Loss of intracellular potassium ion is usually accompanied by an increase in intracellular sodium ion.

When serum sodium concentration is low, the secretion of antidiuretic hormone (ADH) by the pituitary is inhibited, thereby preventing water reabsorption by the distal renal tubules.  On the other hand, adrenal secretion of aldosterone increases renal tubular reabsorption of sodium in an effort to re-establish normal serum sodium concentration.

Sodium Phosphates Injection, USP is indicated as a source of phosphate, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake.  It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions.

The concomitant amount of sodium (4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions.

Sodium phosphate is contraindicated in diseases where high phosphate or low calcium levels may be encountered, and in patients with hypernatremia.

WARNING: This product contains aluminum that may be toxic.  Aluminum may reach toxic levels with prolonged parenteral administration if kidney function is impaired.  Premature neonates are particularly at risk because their kidneys are immature, and they require large amounts of calcium and phosphate solutions, which contain aluminum.

Research indicates that patients with impaired kidney function, including premature neonates, who receive parenteral levels of aluminum at greater than 4 to 5 mcg/kg/day accumulate aluminum at levels associated with central nervous system and bone toxicity.  Tissue loading may occur at even lower rates of administration.

Sodium Phosphates Injection must be diluted and thoroughly mixed before use.

To avoid phosphate intoxication, infuse solutions containing sodium phosphate slowly.  Infusing high concentrations of phosphate may result in a reduction of serum calcium and symptoms of hypocalcemic tetany.  Calcium levels should be monitored.

Solutions containing sodium ion should be used with great care, if at all, in patients with congestive heart failure, severe renal insufficiency and in clinical states in which there exists edema with sodium retention.

In patients with diminished renal function, administration of solutions containing sodium ions may result in sodium retention.

Adverse reactions involve the possibility of phosphate intoxication.  Phosphate intoxication results in a reduction of serum calcium and the symptoms are those of hypocalcemic tetany (see WARNINGS).

In the event of overdosage, discontinue infusions containing sodium phosphate immediately and institute corrective therapy to restore depressed serum calcium and to reduce elevated serum sodium levels. (see WARNINGS,  PRECAUTIONS and ADVERSE REACTIONS)

Sodium Phosphates Injection is administered intravenously only after dilution and thorough mixing in a larger volume of fluid.  The dose and rate of administration are dependent upon the individual needs of the patient.  Serum sodium, inorganic phosphorus and calcium levels should be monitored as a guide to dosage.  Using aseptic technique, all or part of the contents of one or more vials may be added to other intravenous fluids to provide any desired number of millimoles of phosphate and milliequivalents of sodium.

In patients on TPN, approximately 10 to 15 mmol of phosphorus (equivalent to 310 to 465 mg elemental phosphorus) per liter bottle of TPN solution is usually adequate to maintain normal serum phosphate, though larger amounts may be required in hypermetabolic states.  The amount of sodium which accompanies the addition of phosphate also should be kept in mind, and if necessary, serum sodium levels should be monitored.

The suggested dose of phosphorus for infants receiving TPN is 1.5 to 2 mmol/kg/day.

Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit.

These vials are flip-top, Single Dose Vials, packaged 25 vials per tray.  The vials marked with ‘‘PX’’ are partially filled to facilitate transfer of the contents.

Do not administer unless solution is clear and seal intact.  Discard unused portion.

Store at 20° to 25°C (68° to 77°F) [see USP Controlled Room Temperature].

45780G

Revised: August 2017

NDC 63323-170-05       17005PX

SODIUM PHOSPHATES

INJECTION, USP

Phosphorus 15 mmol / 5 mL

(3 mmol/mL)

Sodium 20 mEq / 5mL

(4 mEq/mL)

MUST BE DILUTED PRIOR TO IV USE

5 mL Single Dose Vial

NDC 63323-170-05       17005PX

SODIUM PHOSPHATES

INJECTION, USP

Phosphorus 15 mmol / 5 mL

(3 mmol/mL)

Sodium 20 mEq / 5mL

(4 mEq/mL)

MUST BE DILUTED PRIOR TO IV USE

25 x 5 mL Single Dose Vials

NDC 63323-170-15       17015PX

SODIUM PHOSPHATES

INJECTION, USP

Phosphorus 45 mmol / 15 mL

(3 mmol/mL)

Sodium 60 mEq / 15mL

(4 mEq/mL)

MUST BE DILUTED PRIOR TO IV USE

15 mL Rx only

Single Dose Vial

NDC 63323-170-15       17015PX

SODIUM PHOSPHATES

INJECTION, USP

Phosphorus 45 mmol / 15 mL

(3 mmol/mL)

Sodium 60 mEq / 15mL

(4 mEq/mL)

MUST BE DILUTED PRIOR TO IV USE

25 x 15 mL Rx only

Single Dose Vials