Label: INDICLOR- indium chloride in-111 solution

  • Category: HUMAN PRESCRIPTION DRUG LABEL
  • DEA Schedule: None
  • Marketing Status: New Drug Application

Drug Label Information

Updated 10/13

If you are a consumer or patient please visit this version.

  • SPL UNCLASSIFIED SECTION

    High Purity Indium Chloride In-111 Sterile Solution
    Diagnostic—For use in Radiolabeling
    ProstaScint and Zevalin

    For single dose, single use only

    Close
  • DESCRIPTION

    INDICLOR Indium In-111 Chloride is a diagnostic radiopharmaceutical intended for radiolabeling ProstaScint (capromab pendetide) used for in vivo diagnostic imaging procedures and for radiolabeling Zevalin (ibritumomab tiuxetan) in preparations used for radioimmunotherapy procedures. It is supplied as a sterile, pyrogen-free solution of Indium (111In) Chloride in 0.04M HCl. Each milliliter is supplied at a radioactive concentration of 370 MBq, 10 mCi of Indium In-111 Chloride at time of calibration (no carrier added, with specific activity of > 1.85 GBq/µg Indium, > 50 mCi/µg Indium at time of calibration). The pH of the solution is about 1.4.

    Close
  • RADIONUCLIDIC PURITY

    A Cadmium Cd-112 enriched target is bombarded in a cyclotron to produce Indium In-111 by the (p,2n) reaction. The bombardment conditions, the energy of the proton beam and the length of the bombardment are chosen to ensure an Indium In-111 yield of high radionuclidic purity. Radionuclidic purity is checked at release particularly for the presence of Indium In-114. The relative proportion of this impurity increases, after release of the batch, as a result of its longer half-life. Because of its beta-emitting component and its potentially high organ dose contribution, Indium In-114m is particularly important if present above carefully controlled levels.

    Release specifications:

     
    < 0.08% Indium In-114m at calibration time
     
    < 0.16% Indium In-114m at expiration time
    Close
  • RADIOCHEMICAL PURITY

    Release specification: Not less than 95% Indium present as ionic In3+.

    figure
    Close
  • PHYSICAL CHARACTERISTICS

    Indium In-111 decays by electron capture with a physical half-life of 67.2 hours (2.8 days). The energies of the photons that are useful for detection and imaging studies are listed in Table 1.

    Table 1. Principal Radiation Emission Data*
    Radiation Mean%/Disintegration Mean Energy
    (keV)
    *
    Kocher, David C., "Radioactive Decay Data Tables," DOE/TIC-11026, 115 (1981).
    Gamma 2 90.2 171.3
    Gamma 3 94 245.4
    Close
  • EXTERNAL RADIATION

    The exposure rate constant for 37 MBq, 1 mCi Indium In-111 is 8.3 × 10-4 C/kg/hr, 3.21 R/hr at 1 cm. The first half value thickness of lead (Pb) for Indium In-111 is 0.023 cm. A range of values for the relative attenuation of the radiation emitted by this radionuclide that results from the interposition of various thicknesses of Pb is shown in Table 2. For example, the use of 0.834 cm of lead will decrease the external radiation exposure by a factor of about 1,000.

    Table 2. Indium-111 Radiation Attenuation of Lead Shielding*
    Shield Thickness
    (Pb) cm
    Coefficient of Attenuation
    *
    Data supplied by Oak Ridge Associated Universities, Radiopharmaceutical Internal Dose Information Center, 1984.
    0.023 0.5
    0.203 10-1
    0.513 10-2
    0.834 10-3
    1.12 10-4

    These estimates of attenuation do not take into consideration the presence of longer-lived contaminants with higher energy photons, namely Indium In-114m/114.

    To allow correction for physical decay of Indium In-111, the fractions that remain at selected intervals before and after the time of calibration are shown in Table 3.

    Table 3. Indium In-111 Physical Decay Chart, Half-Life 67.2 Hours (2.8 days)
    Hours Fraction Remaining Hours Fraction Remaining
    *
    Calibration Time
    -48 1.64 18 0.83
    -42 1.54 24 0.78
    -36 1.44 30 0.74
    -30 1.36 36 0.69
    -24 1.28 42 0.65
    -18 1.20 48 0.61
    -12 1.13 54 0.58
    -6 1.06 60 0.54
    0* 1.00 66 0.51
    6 0.94 72 0.48
    12 0.88
    Close
  • CLINICAL PHARMACOLOGY

    Please refer to the package insert for ProstaScint or Zevalin for this information on the final drug product.

    Close
  • INDICATIONS AND USAGE

    INDICLOR Indium In-111 Chloride is indicated for radiolabeling of ProstaScint (capromab pendetide) in preparations used for in vivo diagnostic imaging procedures. Indiclor is also indicated for radiolabeling Zevalin (ibritumomab tiuxetan) in preparations used for radioimmunotherapy procedures. Please refer to the package insert for ProstaScint or Zevalin for information regarding the radiolabeled product.

    Close
  • CONTRAINDICATIONS

    Please refer to the package insert for ProstaScint or Zevalin for this information on the final drug product.

    Close
  • WARNINGS

    The contents of the vial of INDICLOR Indium In-111 Chloride solution are intended only to be used as an ingredient for radiolabeling ProstaScint used for in vivo diagnostic imaging procedures and for radiolabeling Zevalin in preparations used for radioimmunotherapy procedures.

    Indiclor is not to be administered directly to humans.

    Close
  • PRECAUTIONS

    General

    Strict aseptic techniques should be used to maintain sterility throughout the procedures for using this product.

    Do not use after the expiration time and date stated on the label.

    The contents of the vial are radioactive. Adequate shielding must be maintained at all times.

    CARCINOGENESIS, MUTAGENESIS, IMPAIRMENT OF FERTILITY

    Please refer to the package insert for ProstaScint or Zevalin for this information on the final drug product.

    PREGNANCY CATEGORY

    Please refer to the package insert for ProstaScint or Zevalin for this information on the final drug product.

    NURSING MOTHERS

    Please refer to the package insert for ProstaScint or Zevalin for this information on the final drug product.

    PEDIATRIC USE

    Please refer to the package insert for ProstaScint or Zevalin for this information on the final drug product.

    GERIATRIC USE

    Please refer to the package insert for ProstaScint or Zevalin for this information on the final drug product.

    Close
  • ADVERSE REACTIONS

    Please refer to the package insert for ProstaScint or Zevalin for this information on the final drug product.

    Close
  • DOSAGE AND ADMINISTRATION

    Please refer to the package insert for ProstaScint or Zevalin for this information on the final drug product.

    Close
  • RADIATION DOSIMETRY

    Please refer to the package insert for ProstaScint or Zevalin for this information on the final drug product.

    Close
  • STERILITY AND APYROGENICITY

    This product is terminally sterilized by autoclave. Apyrogenicity is confirmed before release by a Limulus test.

    Close
  • HOW SUPPLIED

    INDICLOR Indium-111 Chloride is supplied in a 2 mL vial containing 0.5 milliliters, 185 MBq, 5.0 mCi of Indium In-111 at calibration time. This packaging design has been carefully selected to minimize leaching of cationic and anionic impurities into the product during transport and storage.

    NDC 17156-523-01

    SPECIAL HANDLING AND STORAGE

    Store at room temperature 15°-25°C (59°-77°F).

    This preparation is approved for use by persons licensed by the Illinois Emergency Management Agency pursuant to 32 IL. Adm. Code Section 330.260(a) and 335.4010 or equivalent licenses of the Nuclear Regulatory Commission or an Agreement State.

    It is recommended that the vial be kept inside its transportation shield whenever possible and that it be handled with forceps when doses are being removed.

    INS.1PA — Wednesday Calibration

    INS.1PAF — Saturday Calibration

    ProstaScint® is a registered trademark of EUSA Pharma (USA), Inc.

    Zevalin® is a registered trademark of Spectrum Pharmaceuticals, Inc.

    Close
  • SPL UNCLASSIFIED SECTION

    Manufactured by:
    GE Healthcare
    Medi-Physics, Inc.
    Arlington Heights, IL 60004 U.S.A.

    Customer Service: 1-800-292-8514

    Professional Services: 1-800-654-0118

    INDICLOR is a trademark of GE Healthcare.

    GE and the GE Monogram are trademarks of General Electric Company.

    © 2013 General Electric Company - All rights reserved.

    43-0523
    Revised April 2013

    Product Codes: INS. 1PA/INS. 1PAF

    Close
  • PRINCIPAL DISPLAY PANEL - 2 mL Vial Label

    GE Healthcare
    INDICLOR™ Indium (111 In) Chloride
    GE

    1NS1PA

    Rx ONLY. Sterile, Non-pyrogenic Solution in 0.04M HCl
    NOT FOR DIRECT ADMINISTRATION.
    Do not use after 3 days from Reference date. No carrier added.
    Storage: Ambient Temperature 15°-25°C (59°-77°F).
    For use when radiolabeling Monoclonal Antibodies. Refer to package insert.
    185 MBq, 5 mCi, 370 MBq/mL 10 mCi/mL at 0600hrs CST on reference
    0.5mL Single Dose vial <0.2 µg ln/mL

    Mfd by: GE Healthcare, Medi-Physics, Inc., Arlington Heights, IL 60004 U.S.A.

    41-0523

    PRINCIPAL DISPLAY PANEL - 2 mL Vial Label
    Close
  • INGREDIENTS AND APPEARANCE
    INDICLOR 
    indium chloride in-111 solution
    Product Information
    Product Type HUMAN PRESCRIPTION DRUG LABEL Item Code (Source) NDC:17156-523
    Route of Administration INTRAVENOUS DEA Schedule     
    Active Ingredient/Active Moiety
    Ingredient Name Basis of Strength Strength
    Indium Chloride In-111 (Indium Cation in-111) Indium Cation in-111 5 mCi  in 0.5 mL
    Inactive Ingredients
    Ingredient Name Strength
    Hydrochloric Acid  
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:17156-523-01 1 in 1 CONTAINER
    1 2 mL in 1 VIAL, SINGLE-DOSE
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    NDA NDA019862 12/29/1992
    Labeler - Medi-Physics Inc. (095263729)
    Establishment
    Name Address ID/FEI Business Operations
    Medi-Physics Inc. 095263729 MANUFACTURE(17156-523), RELABEL(17156-523), REPACK(17156-523), ANALYSIS(17156-523), API MANUFACTURE(17156-523)
    Close