Label: AMPICILLIN- ampicillin sodium injection, powder, for solution

  • NDC Code(s): 0781-9401-78, 0781-9401-95, 0781-9402-78, 0781-9402-95, view more
    0781-9404-85, 0781-9404-95, 0781-9407-78, 0781-9407-95, 0781-9408-80, 0781-9408-95
  • Packager: Sandoz Inc
  • Category: HUMAN PRESCRIPTION DRUG LABEL

Drug Label Information

Updated May 8, 2024

If you are a healthcare professional or from the pharmaceutical industry please visit this version.

  • SPL UNCLASSIFIED SECTION

    Rx Only

    (For Intramuscular or Intravenous Injection)

    To reduce the development of drug-resistant bacteria and maintain the effectiveness of ampicillin and other antibacterial drugs, ampicillin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria.

  • DESCRIPTION

    Ampicillin for injection, USP the monosodium salt of [2S-[2α,5α,6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid, is a synthetic penicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens.

    Ampicillin for injection, USP is a white to cream-tinged, crystalline powder. The reconstituted solution is clear, colorless and free from visible particulates.

    Each vial of ampicillin for injection, USP contains ampicillin sodium equivalent to 125 mg, 250 mg, 500 mg, 1 gram or 2 grams ampicillin. Ampicillin for injection, USP contains 65.8 mg [2.9 mEq] sodium per gram ampicillin.

    It has the following molecular structure:

    chemical-structure

    The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10.

  • CLINICAL PHARMACOLOGY

    Ampicillin for injection diffuses readily into most body tissues and fluids. However, penetration into the cerebrospinal fluid and brain occurs only when the meninges are inflamed. Ampicillin is excreted largely unchanged in the urine and its excretion can be delayed by concurrent administration of probenecid. Due to maturational changes in renal function, ampicillin half-life decreases as postmenstrual age (a sum of gestational age and postnatal age) increases for infants with postnatal age of less than 28 days. The active form appears in the bile in higher concentrations than those found in serum. Ampicillin is the least serum-bound of all the penicillins, averaging about 20% compared to approximately 60 to 90% for other penicillins. Ampicillin for injection is well tolerated by most patients and has been given in doses of 2 grams daily for many weeks without adverse reactions.

    Microbiology

    While in vitro studies have demonstrated the susceptibility of most strains of the following organisms, clinical efficacy for infections other than those included in the INDICATIONS AND USAGE section has not been demonstrated.

    Antibacterial Activity

    The following bacteria have been shown in in vitro studies to be susceptible to ampicillin for injection:

    Gram-positive Bacteria

    Hemolytic and nonhemolytic streptococci

    Streptococcus pneumoniae

    Nonpenicillinase-producing staphylococci

    Clostridium spp.

    B. anthracis

    Listeria monocytogenes

    Most strains of enterococci.

    Gram-negative Bacteria

    H. influenzae

    N. gonorrhoeae

    N. meningitidis

    Proteus mirabilis

    Many strains of Salmonella, Shigella, and E. coli.

    AMPICILLIN does not resist destruction by penicillinase.

    Susceptibility Testing

    For specific information regarding susceptibility test interpretive criteria and associated test methods and quality control standards recognized by FDA for this drug, please see: https://www.fda.gov/STIC.

  • INDICATIONS AND USAGE

    Ampicillin for injection is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:

    Respiratory Tract Infections caused by streptococcus pneumoniae. Staphylococcus aureus (penicillinase and nonpenicillinase-producing), H. influenzae, and Group A beta-hemolytic streptococci.

    Bacterial Meningitis caused by E. coli, Group B streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria.

    Septicemia and Endocarditis caused by susceptible Gram-positive organisms including streptococcus spp., penicillin G-susceptible staphylococci, and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella spp. responds to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis.

    Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis.

    Gastrointestinal Infections caused by Salmonella typhi (typhoid fever), other Salmonella spp., and Shigella spp. (dysentery) usually respond to oral or intravenous therapy.

    Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing. It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate.

    To reduce the development of drug-resistant bacteria and maintain the effectiveness of ampicillin for injection and other antibacterial drugs, ampicillin for injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.

    Indicated surgical procedures should be performed.

  • CONTRAINDICATIONS

    A history of a previous hypersensitivity reaction to any of the penicillins is a contraindication.

  • WARNINGS

    Serious and occasionally fatal hypersensitivity (anaphylactoid) reactions have been reported in patients on penicillin therapy. Although anaphylaxis is more frequent following parenteral therapy, it has occurred in patients on oral penicillins. These reactions are more apt to occur in individuals with a history of penicillin hypersensitivity and/or a history of sensitivity to multiple allergens.

    There have been well-documented reports of individuals with a history of penicillin hypersensitivity reactions who have experienced severe hypersensitivity reactions when treated with a cephalosporin. Before initiating therapy with a penicillin, careful inquiry should be made concerning previous hypersensitivity reactions to penicillins, cephalosporins, and other allergens. If an allergic reaction occurs, the drug should be discontinued and appropriate therapy instituted.

    SERIOUS ANAPHYLACTOID REACTIONS REQUIRE IMMEDIATE EMERGENCY TREATMENT WITH EPINEPHRINE, OXYGEN, INTRAVENOUS STEROIDS, AND AIRWAY MANAGEMENT, INCLUDING INTUBATION, SHOULD ALSO BE ADMINISTERED AS INDICATED.

    Clostridium difficile associated diarrhea (CDAD) has been reported with use of nearly all antibacterial agents, including ampicillin for injection, and may range in severity from mild diarrhea to fatal colitis. Treatment with antibacterial agents alters the normal flora of the colon leading to overgrowth of C. difficile.

    C. difficile produces toxins A and B which contribute to the development of CDAD. Hypertoxin producing strains of C. difficile cause increased morbidity and mortality, as these infections can be refractory to antimicrobial therapy and may require colectomy. CDAD must be considered in all patients who present with diarrhea following antibiotic use. Careful medical history is necessary since CDAD has been reported to occur over two months after the administration of antibacterial agents.

    If CDAD is suspected or confirmed, ongoing antibiotic use not directed against C. difficile may need to be discontinued. Appropriate fluid and electrolyte management, protein supplementation, antibiotic treatment of C. difficile, and surgical evaluation should be instituted as clinically indicated.

  • PRECAUTIONS

    General

    The possibility of superinfections with mycotic organisms or bacterial pathogens should be kept in mind during therapy. In such cases, discontinue the drug and substitute appropriate treatment.

    A high percentage (43 to 100 percent) of patients with infectious mononucleosis who receive ampicillin develop a skin rash. Typically, the rash appears 7 to 10 days after the start of oral ampicillin therapy and remains for a few days to a week after the drug is discontinued. In most cases, the rash is maculopapular, pruritic, and generalized. Therefore, the administration of ampicillin is not recommended in patients with mononucleosis. It is not known whether these patients are truly allergic to ampicillin.

    Prescribing ampicillin for injection in the absence of a proven or strongly suspected bacterial infection or a prophylactic indication is unlikely to provide benefit to the patient and increases the risk of the development of drug-resistant bacteria.

    Information for Patients

    Patients should be counseled that antibacterial drugs including ampicillin should only be used to treat bacterial infections. They do not treat viral infections (e.g., the common cold). When ampicillin is prescribed to treat a bacterial infection, patients should be told that although it is common to feel better early in the course of therapy, the medication should be taken exactly as directed. Skipping doses or not completing the full course of therapy may: (1) decrease the effectiveness of the immediate treatment, and (2) increase the likelihood that bacteria will develop resistance and will not be treatable by ampicillin or other antibacterial drugs in the future.

    Diarrhea is a common problem caused by antibiotics which usually ends when the antibiotic is discontinued. Sometimes after starting treatment with antibiotics, patients can develop watery and bloody stools (with or without stomach cramps and fever) even as late as two or more months after having taken the last dose of the antibiotic. If this occurs, patients should contact their physician as soon as possible.

    Laboratory Tests

    As with any potent drug, periodic assessment of organ system function, including renal, hepatic, and hematopoietic, should be made during prolonged therapy.

    Transient elevation of serum transaminase has been observed following administration of ampicillin. The significance of this finding is not known.

    Drug Interactions

    The concurrent administration of allopurinol and ampicillin increases substantially the incidence of skin rashes in patients receiving both drugs as compared to patients receiving ampicillin alone. It is not known whether this potentiation of ampicillin rashes is due to allopurinol or the hyperuricemia present in these patients.

    Drug/Laboratory Test Interactions

    With high urine concentrations of ampicillin, false-positive glucose reactions may occur if Clinitest, Benedict’s Solution, or Fehling’s Solution are used. Therefore, it is recommended that glucose tests based on enzymatic glucose oxidase reactions (such as Clinistix or Tes-Tape) be used.

    Carcinogenesis, Mutagenesis, and Impairment of Fertility

    No long-term animal studies have been conducted with this drug.

    Pregnancy

    Reproduction studies have been performed in laboratory animals at doses several times the human dose and have revealed no evidence of adverse effects due to ampicillin. There are, however, no adequate and well-controlled studies in pregnant women. Because animal reproduction studies are not always predictive of human response, this drug should be used during pregnancy only if clearly needed.

    Labor and Delivery

    Oral ampicillin-class antibiotics are poorly absorbed during labor. Studies in guinea pig showed that intravenous administration of ampicillin slightly decreased the uterine tone and frequency of contractions, but moderately increased the height and duration of contractions. However, it is not known whether use of these drugs in humans during labor or delivery has immediate or delayed adverse effects on the fetus, prolongs the duration of labor, or increases the likelihood that forceps delivery or other obstetrical intervention or resuscitation of the newborn will be necessary.

    Nursing Mothers

    Ampicillin is excreted in trace amounts in human milk. Therefore, caution should be exercised when ampicillin-class antibiotics are administered to a nursing woman.

    Pediatric Use

    Guidelines for the administration of these drugs to children, including neonates are presented in DOSAGE AND ADMINISTRATION section.

  • ADVERSE REACTIONS

    As with other penicillins, it may be expected that untoward reactions will be essentially limited to sensitivity phenomena. They are more likely to occur in individuals who have previously demonstrated hypersensitivity to penicillins and in those with a history of allergy, asthma, hay fever, or urticaria.

    The following adverse reactions have been reported as associated with the use of ampicillin:

    Gastrointestinal

    Glossitis, stomatitis, black “hairy” tongue, nausea, vomiting, enterocolitis, pseudomembranous colitis, and diarrhea. (These reactions are usually associated with oral dosage forms.)

    Hypersensitivity Reactions

    Skin rashes and urticaria have been reported frequently. A few cases of exfoliative dermatitis and erythema multiforme have been reported. Linear IgA bullous dermatosis has been reported. Anaphylaxis is the most serious reaction experienced and has usually been associated with the parenteral dosage form.

    Note: Urticaria, other skin rashes, and serum sickness-like reactions may be controlled with antihistamines and, if necessary, systemic corticosteroids. Whenever such reactions occur, ampicillin should be discontinued, unless, in the opinion of the physician, the condition being treated is life-threatening and amenable only to ampicillin therapy. Serious anaphylactic reactions require the immediate use of epinephrine, oxygen, and intravenous steroids.

    Liver – A moderate rise in serum glutamic oxaloacetic transaminase (SGOT) has been noted, particularly in infants, but the significance of this finding is unknown. Mild transitory SGOT elevations have been observed in individuals receiving larger (two to four times) than usual and oft-repeated intramuscular injections. Evidence indicates that glutamic oxaloacetic transaminase (GOT) is released at the site of intramuscular injection of ampicillin sodium and that the presence of increased amounts of this enzyme in the blood does not necessarily indicate liver involvement.

    Hemic and Lymphatic Systems – Anemia, thrombocytopenia, thrombocytopenic purpura, eosinophilia, leukopenia, and agranulocytosis have been reported during therapy with the penicillins. These reactions are usually reversible on discontinuation of therapy and are believed to be hypersensitivity phenomena.

    Central Nervous System - Seizures

  • OVERDOSAGE

    In cases of overdose, discontinue medication, treat symptomatically, and institute supportive measures as required. In patients with renal function impairment, ampicillin-class antibiotics can be removed by hemodialysis but not peritoneal dialysis.

  • DOSAGE AND ADMINISTRATION

    Infections of the respiratory tract and soft tissues.

    Patients weighing 40 kg (88 lbs) or more: 250 mg to 500 mg every 6 hours.

    Patients weighing less than 40 kg (88 lbs): 25 to 50 mg/kg/day in equally divided doses at 6- to 8- hour intervals.

    Infections of the gastrointestinal and genitourinary tracts (including those caused by Neisseria gonorrhoeae in females).

    Patients weighing 40 kg (88 lbs) or more: 500 mg every 6 hours.

    Patients weighing less than 40 kg (88 lbs): 50 mg/kg/day in equally divided doses at 6- to 8- hour intervals.

    In the treatment of chronic urinary tract and intestinal infections, frequent bacteriological and clinical appraisal is necessary. Smaller doses than those recommended above should not be used. Higher doses should be used for stubborn or severe infections. In stubborn infections, therapy may be required for several weeks. It may be necessary to continue clinical and/or bacteriological follow-up for several months after cessation of therapy.

    Urethritis in males due to N. gonorrhoeae.

    Adults – Two doses of 500 mg each at an interval of 8 to 12 hours. Treatment may be repeated if necessary or extended if required.

    In the treatment of complications of gonorrheal urethritis, such as prostatitis and epididymitis, prolonged and intensive therapy is recommended. Cases of gonorrhea with a suspected primary lesion of syphilis should have darkfield examinations before receiving treatment. In all other cases where concomitant syphilis is suspected, monthly serological tests should be made for a minimum of four months.

    The doses for the preceding infections may be given by either the intramuscular or intravenous route. A change to oral ampicillin may be made when appropriate.

    Bacterial Meningitis

    Adults and children – 150 to 200 mg/kg/day in equally divided doses every 3 to 4 hours. (Treatment may be initiated with intravenous drip therapy and continued with intramuscular injections.) The doses for other infections may be given by either the intravenous or intramuscular route.

    Neonates (less than or equal to 28 days of postnatal age) - Dosage should be based on Gestational age and Postnatal age according to Table 1.

    Table 1: Dosage in Neonates (less than or equal to 28 days of postnatal age) for Bacterial Meningitis and Septicemia

    Gestational age (weeks)

    Postnatal age (days)

    Dosage

    less than or equal to 34

    less than or equal to 7

    100 mg/kg/day in equally divided doses every 12 hours

    less than or equal to 34

    greater than or equal to 8 and less than 28

    150 mg/kg/day in equally divided doses every 12 hours

    greater than 34

    less than or equal to 28

    150 mg/kg/day in equally divided doses every 8 hours

    Septicemia

    Adults and children – 150 to 200 mg/kg/day. Start with intravenous administration for at least three days and continue with the intramuscular route every 3 to 4 hours.

    Neonates (less than or equal to 28 days of postnatal age) - Dosage should be based on Gestational age and Postnatal age according to Table 1 (above).

    Treatment of all infections should be continued for a minimum of 48 to 72 hours beyond the time that the patient becomes asymptomatic or evidence of bacterial eradication has been obtained. A minimum of 10 days treatment is recommended for any infection caused by Group A beta-hemolytic streptococci to help prevent the occurrence of acute rheumatic fever or acute glomerulonephritis.

  • DIRECTIONS FOR USE

    Use only freshly prepared solutions. Intramuscular and intravenous injections should be administered within one hour after preparation since the potency may decrease significantly after this period.

    Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit.

    For Intramuscular Use – Dissolve contents of a vial with the amount of Sterile Water for Injection, USP, or Bacteriostatic Water for Injection, USP, listed in the table below:

    NDC - 0781

    Label

    Claim

    Recommended

    Amount of

    Diluent

    Withdrawable

    Volume

    Concentration

    (in mg/mL)

    9401-95

    125 mg

    1.2 mL

    1 mL

    125 mg

    9402-95

    250 mg

    1 mL

    1 mL

    250 mg

    9407-95

    500 mg

    1.8 mL

    2 mL

    250 mg

    9404-95

    1 gram

    3.5 mL

    4 mL

    250 mg

    9408-95

    2 grams

    6.8 mL

    8 mL

    250 mg

    While Ampicillin for injection, USP, 1 g and 2 g, are primarily for intravenous use, they may be administered intramuscularly when the 250 mg or 500 mg vials are unavailable. In such instances, dissolve in 3.5 or 6.8 mL Sterile Water for Injection, USP, or Bacteriostatic Water for Injection, USP, respectively. The resulting solution will provide a concentration of 250 mg per mL.

    Ampicillin for Injection, USP, 125 mg, is intended primarily for pediatric use. It also serves as a convenient dosage form when small parenteral doses of the antibiotic are required.

    Bacteriostatic Water for Injection, USP is not to be used as a diluent when the product will be used in newborns.

    For Direct Intravenous Use – Add 5 mL Sterile Water for Injection, USP, or Bacteriostatic Water for Injection, USP to the 125 mg, 250 mg, and 500 mg vials and administer slowly over a 3- to 5- minute period. Ampicillin for Injection, USP, 1 g or 2 g may also be given by direct intravenous administration. Dissolve in 7.4 or 14.8 mL Sterile Water for Injection, USP, or Bacteriostatic Water for Injection, USP, respectively, and administer slowly over at least 10 to 15 minutes. CAUTION: More rapid administration may result in convulsive seizures.

    For Administration by Intravenous Drip – Reconstitute as directed above (For Direct Intravenous Use) prior to diluting with Intravenous Solution. Stability studies on ampicillin sodium at several concentrations in various intravenous solutions indicate the drug will lose less than 10% activity at the temperatures noted for the time periods stated.

    Room Temperature (25° C)

    Diluent

    Concentrations

    Stability Periods

    Sterile Water for Injection

    up to 30 mg/mL

    8 hours

    0.9% Sodium Chloride Injection, USP

    up to 30 mg/mL

    8 hours

    5% Dextrose Injection, USP

    10 to 20 mg/mL

    1 hour

    5% Dextrose Injection, USP

    up to 2 mg/mL

    2 hours

    5% Dextrose and 0.45% Sodium Chloride Injection, USP

    up to 2 mg/mL

    2 hours

    Lactated Ringer’s Injection, USP

    up to 30 mg/mL

    8 hours

    Refrigerated (4° C)

    Diluent

    Concentrations

    Stability Periods

    Sterile Water for Injection

    30 mg/mL

    48 hours

    Sterile Water for Injection

    up to 20 mg/mL

    72 hours

    0.9% Sodium Chloride Injection, USP

    30 mg/mL

    24 hours

    0.9% Sodium Chloride Injection, USP

    up to 20 mg/mL

    48 hours

    Lactated Ringer’s Injection, USP

    up to 30 mg/mL

    24 hours

    5% Dextrose Injection, USP

    up to 20 mg/mL

    1 hour

    5% Dextrose and 0.45% Sodium Chloride Injection, USP

    up to 10 mg/mL

    1 hour

    Only those solutions listed above should be used for the intravenous infusion of ampicillin for injection, USP. The concentrations should fall within the range specified. The drug concentration and the rate and volume of the infusion should be adjusted so that the total dose of ampicillin is administered before the drug loses its stability in the solution in use.

  • HOW SUPPLIED

    Ampicillin for injection, USP for intramuscular or intravenous injection. Ampicillin sodium equivalent to 125 mg, 250 mg, 500 mg, 1 gram, or 2 grams ampicillin per vial.

    NDC 0781-9401-95

    125 mg vial packaged in 10s

    NDC 0781-9402-95

    250 mg vial packaged in 10s

    NDC 0781-9407-95

    500 mg vial packaged in 10s

    NDC 0781-9404-95

    1 gram vial packaged in 10s

    NDC 0781-9408-95

    2 gram vial packaged in 10s

    Also available as:

     
    NDC 0781-9409-95 10 gram Pharmacy Bulk Package packaged in 10s

    Storage

    Store at 20° to 25°C (68° to 77°F) [see USP Controlled Room Temperature].

    Protect the constituted solution from freezing.

    Clinitest is a registered trademark of Miles, Inc.

    Clinistix is a registered trademark of Bayer Corporation.

    Tes-Tape is a registered trademark of Eli Lilly Company.

    Novaplus is a registered trademark of Vizient, Inc.

    Manufactured by Sandoz GmbH for

    Sandoz Inc., Princeton, NJ 08540

    Revised: January 2024

  • 125 mg Label

    NDC 0781-9401-95 Rx Only

    Ampicillin for Injection, USP

    125 mg per vial

    Case Qty.: 10 Vials

    Store the dry powder at 20° to 25°C (68° to 77°F)

    [see USP Controlled Room Temperature].

    novaplus

    125mg-case-label
  • 250 mg Label

    NDC 0781-9402-95 Rx Only

    Ampicillin for Injection, USP

    250 mg per vial

    Case Qty.: 10 Vials

    Store the dry powder at 20° to 25°C (68° to 77°F)

    [see USP Controlled Room Temperature].

    novaplus

    250mg-case-label
  • 500 mg Label

    NDC 0781-9407-95 Rx Only

    Ampicillin for Injection, USP

    500 mg per vial

    Case Qty.: 10 Vials

    Store the dry powder at 20° to 25°C (68° to 77°F)

    [see USP Controlled Room Temperature].

    novaplus

    500mg-case-label
  • 1 gram Label

    NDC 0781-9404-95 Rx Only

    Ampicillin for Injection, USP

    1 gram per vial

    Case Qty.: 10 Vials

    Store the dry powder at 20° to 25°C (68° to 77°F)

    [see USP Controlled Room Temperature].

    novaplus

    1-gram-case-label
  • 2 gram Label

    NDC 0781-9408-95 Rx Only

    Ampicillin for Injection, USP

    2 grams per vial

    Case Qty.: 10 Vials

    Store the dry powder at 20° to 25°C (68° to 77°F)

    [see USP Controlled Room Temperature].

    novaplus

    2-gram-case-label
  • INGREDIENTS AND APPEARANCE
    AMPICILLIN 
    ampicillin sodium injection, powder, for solution
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:0781-9401
    Route of AdministrationINTRAVENOUS, INTRAMUSCULAR
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    AMPICILLIN SODIUM (UNII: JFN36L5S8K) (AMPICILLIN - UNII:7C782967RD) AMPICILLIN125 mg
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:0781-9401-9510 in 1 PACKAGE03/03/1971
    1NDC:0781-9401-781 in 1 VIAL, GLASS; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    ANDAANDA06139503/03/1971
    AMPICILLIN 
    ampicillin sodium injection, powder, for solution
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:0781-9402
    Route of AdministrationINTRAVENOUS, INTRAMUSCULAR
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    AMPICILLIN SODIUM (UNII: JFN36L5S8K) (AMPICILLIN - UNII:7C782967RD) AMPICILLIN250 mg
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:0781-9402-9510 in 1 PACKAGE03/03/1971
    1NDC:0781-9402-781 in 1 VIAL, GLASS; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    ANDAANDA06139503/03/1971
    AMPICILLIN 
    ampicillin sodium injection, powder, for solution
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:0781-9407
    Route of AdministrationINTRAVENOUS, INTRAMUSCULAR
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    AMPICILLIN SODIUM (UNII: JFN36L5S8K) (AMPICILLIN - UNII:7C782967RD) AMPICILLIN500 mg
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:0781-9407-9510 in 1 PACKAGE03/03/1971
    1NDC:0781-9407-781 in 1 VIAL, GLASS; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    ANDAANDA06139503/03/1971
    AMPICILLIN 
    ampicillin sodium injection, powder, for solution
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:0781-9404
    Route of AdministrationINTRAVENOUS, INTRAMUSCULAR
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    AMPICILLIN SODIUM (UNII: JFN36L5S8K) (AMPICILLIN - UNII:7C782967RD) AMPICILLIN1 g
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:0781-9404-9510 in 1 PACKAGE03/03/1971
    1NDC:0781-9404-851 in 1 VIAL, GLASS; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    ANDAANDA06139503/03/1971
    AMPICILLIN 
    ampicillin sodium injection, powder, for solution
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:0781-9408
    Route of AdministrationINTRAVENOUS, INTRAMUSCULAR
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    AMPICILLIN SODIUM (UNII: JFN36L5S8K) (AMPICILLIN - UNII:7C782967RD) AMPICILLIN2 g
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:0781-9408-9510 in 1 PACKAGE03/03/1971
    1NDC:0781-9408-801 in 1 VIAL, GLASS; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    ANDAANDA06139503/03/1971
    Labeler - Sandoz Inc (005387188)