Label: HEPARIN SODIUM injection

  • NDC Code(s): 0264-5705-05, 0264-5705-10
  • Packager: B. Braun Medical Inc.
  • Category: HUMAN PRESCRIPTION DRUG LABEL
  • DEA Schedule: None
  • Marketing Status: Abbreviated New Drug Application

Drug Label Information

Updated November 16, 2022

If you are a consumer or patient please visit this version.

  • DESCRIPTION

    Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6- sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose, and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions.

    Structural formula of Heparin Sodium (representative subunits):

    Chemical structure

    Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for use as an anticoagulant. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram.

    Each mL contains 10,000 USP units heparin sodium, in water for injection, and hydrochloric acid or sodium hydroxide for pH adjustment. The pH range is 5.0 to 7.5.

  • CLINICAL PHARMACOLOGY

    Heparin inhibits reactions that lead to the clotting of blood and the formation of fibrin clots both in vitro and in vivo. Heparin acts at multiple sites in the normal coagulation system. Small amounts of heparin in combination with antithrombin III (heparin cofactor) can inhibit thrombosis by inactivating activated Factor X and inhibiting the conversion of prothrombin to thrombin. Once active thrombosis has developed, larger amounts of heparin can inhibit further coagulation by inactivating thrombin and preventing the conversion of fibrinogen to fibrin. Heparin also prevents the formation of a stable fibrin clot by inhibiting the activation of the fibrin stabilizing factor.

    Bleeding time is usually unaffected by heparin. Clotting time is prolonged by full therapeutic doses of heparin; in most cases, it is not measurably affected by low doses of heparin.

    Patients over 60 years of age, following similar doses of heparin, may have higher plasma levels of heparin and longer activated partial thromboplastin times (APTTs) compared with patients under 60 years of age.

    Peak plasma levels of heparin are achieved 2 to 4 hours following subcutaneous administration, although there are considerable individual variations. Loglinear plots of heparin plasma concentrations with time, for a wide range of dose levels, are linear, which suggests the absence of zero order processes. Liver and reticuloendothelial system are the sites of biotransformation. The biphasic elimination curve, a rapidly declining alpha phase (t 1/2 = 10 min.), and after the age of 40 a slower beta phase, indicates uptake in organs. The absence of a relationship between anticoagulant half-life and concentration half-life may reflect factors such as protein binding of heparin.

    Heparin does not have fibrinolytic activity; therefore, it will not lyse existing clots.

  • INDICATIONS AND USAGE

    Heparin Sodium Injection, USP is indicated for:

    • Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;
    • Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery who are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);
    • Prophylaxis and treatment of pulmonary embolism;
    • Atrial fibrillation with embolization;
    • Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);
    • Prevention of clotting in arterial and cardiac surgery;
    • Prophylaxis and treatment of peripheral arterial embolism;
    • Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.
  • CONTRAINDICATIONS

    Heparin sodium should NOT be used in patients with the following conditions:

    • Severe thrombocytopenia;
    • When suitable blood coagulation tests - e.g., the whole blood clotting time, partial thromboplastin time, etc., cannot be performed at appropriate intervals (this contraindication refers to full-dose heparin; there is usually no need to monitor coagulation parameters in patients receiving low-dose heparin);
    • An uncontrolled active bleeding state (see WARNINGS), except when this is due to disseminated intravascular coagulation.
  • WARNINGS

    Heparin is not intended for intramuscular use.

    Fatal Medication Errors

    Do not use Heparin Sodium Injection as a “catheter lock flush” product. Heparin Sodium Injection is supplied in sterile syringes that contain a highly concentrated solution of 5,000 units in 0.5 mL. Fatal hemorrhages have occurred in pediatric patients due to medication errors in which 1 mL Heparin Sodium Injection vials were confused with 1 mL “catheter lock flush” vials. Carefully examine all Heparin Sodium Injection vials and cartridges to confirm the correct product choice prior to administration of the drug.

    Hypersensitivity

    Patients with documented hypersensitivity to heparin should be given the drug only in clearly life- threatening situations (See ADVERSE REACTIONS, Hypersensitivity).

    Hemorrhage

    Hemorrhage can occur at virtually any site in patients receiving heparin. An unexplained fall in hematocrit, fall in blood pressure or any other unexplained symptom should lead to serious consideration of a hemorrhagic event.

    Heparin sodium should be used with extreme caution in disease states in which there is increased danger of hemorrhage. Some of the conditions in which increased danger of hemorrhage exists are:

    Cardiovascular — Subacute bacterial endocarditis, severe hypertension.

    Surgical — During and immediately following (a) spinal tap or spinal anesthesia or (b) major surgery, especially involving the brain, spinal cord, or eye.

    Hematologic — Conditions associated with increased bleeding tendencies, such as hemophilia, thrombocytopenia, and some vascular purpuras.

    Gastrointestinal — Ulcerative lesions and continuous tube drainage of the stomach or small intestine.

    Other — Menstruation, liver disease with impaired hemostasis.

    Coagulation Testing

    When heparin sodium is administered in therapeutic amounts, its dosage should be regulated by frequent blood coagulation tests. If the coagulation test is unduly prolonged or if hemorrhage occurs, heparin sodium should be promptly discontinued (see OVERDOSAGE).

    Thrombocytopenia

    Thrombocytopenia has been reported to occur in patients receiving heparin with a reported incidence up to 30%. Platelet counts should be obtained at baseline and periodically during heparin administration. Mild thrombocytopenia (count greater than 100,000/mm3) may remain stable or reverse even if heparin is continued. However, thrombocytopenia of any degree should be monitored closely. If the count falls below 100,000/mm3 or if recurrent thrombosis develops (see Heparin-induced Thrombocytopenia (HIT) (With or Without Thrombosis)), the heparin product should be discontinued and, if necessary, an alternative anticoagulant administered.

    Heparin-induced Thrombocytopenia (HIT) (With or Without Thrombosis)

    HIT is a serious immune-mediated reaction resulting from irreversible aggregation of platelets. HIT may progress to the development of venous and arterial thromboses, a condition referred to as HIT with thrombosis. Thrombotic events may also be the initial presentation for HIT. These serious thromboembolic events include deep vein thrombosis, pulmonary embolism, cerebral vein thrombosis, limb ischemia, stroke, myocardial infarction, mesenteric thrombosis, renal arterial thrombosis, skin necrosis, gangrene of the extremities that may lead to amputation, and fatal outcomes.

    Once HIT (with or without thrombosis) is diagnosed or strongly suspected, all heparin sodium sources (including heparin flushes) should be discontinued and an alternative anticoagulant used. Future use of heparin sodium, especially within 3 to 6 months following the diagnosis of HIT (with or without thrombosis), and while patients test positive for HIT antibodies, should be avoided.

    Immune-mediated HIT is diagnosed based on clinical findings supplemented by laboratory tests confirming the presence of antibodies to heparin sodium, or platelet activation induced by heparin sodium. A drop in platelet count greater than 50% from baseline is considered indicative of HIT. Platelet counts begin to fall 5 to 10 days after exposure to heparin sodium in heparin sodium-naïve individuals, and reach a threshold by days 7 to 14. In contrast, “rapid onset” HIT can occur very quickly (within 24 hours following heparin sodium initiation), especially in patients with a recent exposure to heparin sodium (i.e. previous 3 months). Thrombosis development shortly after documenting thrombocytopenia is a characteristic finding in almost half of all patients with HIT.

    Thrombocytopenia of any degree should be monitored closely. If the platelet count falls below 100,000/mm3 or if recurrent thrombosis develops, the heparin product should be promptly discontinued and alternative anticoagulants considered if patients require continued anticoagulation.

    Delayed Onset of HIT (With or Without Thrombosis)

    Heparin-induced Thrombocytopenia (with or without thrombosis) can occur up to several weeks after the discontinuation of heparin therapy. Patients presenting with thrombocytopenia or thrombosis after discontinuation of heparin sodium should be evaluated for HIT (with or without thrombosis).

    Use in Neonates

    Carefully examine all Heparin Sodium Injection vials and syringes to confirm choice of the correct strength prior to administration of the drug. Pediatric patients, including neonates, have died as a result of medication errors in which Heparin Sodium Injection vials have been confused with “catheter lock flush” vials. (See WARNINGS, Fatal Medication Errors.)

  • PRECAUTIONS

    General

    Thrombocytopenia, Heparin-induced Thrombocytopenia (HIT) (With or Without Thrombosis) and Delayed Onset of HIT (With or Without Thrombosis)
    See WARNINGS.

    Heparin Resistance

    Increased resistance to heparin is frequently encountered in fever, thrombosis, thrombophlebitis, infections with thrombosing tendencies, myocardial infarction, cancer and in postsurgical patients.

    Increased Risk to Older Patients, Especially Women

    A higher incidence of bleeding has been reported in patients, particularly women, over 60 years of age.

    Laboratory Tests

    Periodic platelet counts, hematocrits, and tests for occult blood in stool are recommended during the entire course of heparin therapy, regardless of the route of administration (see DOSAGE AND ADMINISTRATION).

    Drug Interactions

    Oral Anticoagulants
    Heparin sodium may prolong the one-stage prothrombin time. Therefore, when heparin sodium is given with dicumarol or warfarin sodium, a period of at least 5 hours after the last intravenous dose or 24 hours after the last subcutaneous dose should elapse before blood is drawn, if a valid prothrombin time is to be obtained.

    Platelet Inhibitors
    Drugs such as acetylsalicylic acid, dextran, phenylbutazone, ibuprofen, indomethacin, dipyridamole, hydroxychloroquine and others that interfere with platelet-aggregation reactions (the main hemostatic defense of heparinized patients) may induce bleeding and should be used with caution in patients receiving heparin sodium.

    Other Interactions
    Digitalis, tetracyclines, nicotine or antihistamines may partially counteract the anticoagulant action of heparin sodium.

    Intravenous nitroglycerin administered to heparinized patients may result in a decrease of the partial thromboplastin time with subsequent rebound effect upon discontinuation of nitroglycerin. Careful monitoring of partial thromboplastin time and adjustment of heparin dosage are recommended during coadministration of heparin and intravenous nitroglycerin.

    Drug/Laboratory Test Interactions

    Hyperaminotransferasemia
    Significant elevations of aminotransferase (SGOT [S-AST] and SGPT [S-ALT]) levels have occurred in a high percentage of patients (and healthy subjects) who have received heparin. Since aminotransferase determinations are important in the differential diagnosis of myocardial infarction, liver disease and pulmonary emboli, increases that might be caused by drugs (like heparin) should be interpreted with caution.

    Carcinogenesis, Mutagenesis, Impairment of Fertility
    No long-term studies in animals have been performed to evaluate carcinogenic potential of heparin. Also, no reproduction studies in animals have been performed concerning mutagenesis or impairment of fertility.

    Pregnancy

    There are no adequate and well-controlled studies on heparin use in pregnant women. In published reports, heparin exposure during pregnancy did not show evidence of an increased risk of adverse maternal or fetal outcomes in humans. Heparin sodium does not cross the placenta based on human and animal studies. Administration of heparin to pregnant animals at doses higher than the maximum human daily dose based on body weight resulted in increased resorptions. Use heparin sodium during pregnancy only if the potential benefit justifies the potential risk to the fetus.

    If available, preservative-free Heparin Sodium Injection is recommended when heparin therapy is needed during pregnancy. There are no known adverse outcomes associated with fetal exposure to the preservative benzyl alcohol through maternal drug administration; however, the preservative benzyl alcohol can cause serious adverse events and death when administered intravenously to neonates and infants (see PRECAUTIONS, Pediatric Use).

    In a published study conducted in rats and rabbits, pregnant animals received heparin intravenously during organogenesis at a dose of 10,000 units/kg/day, approximately 10 times the maximum human daily dose based on body weight. The number of early resorptions increased in both species. There was no evidence of teratogenic effects.

    Nursing Mothers

    If available, preservative-free Heparin Sodium Injection is recommended when heparin therapy is needed during lactation. Due to its large molecular weight, heparin is not likely to be excreted in human milk, and any heparin in milk would not be orally absorbed by a nursing infant. Benzyl alcohol present in maternal serum is likely to cross into human milk and may be orally absorbed by a nursing infant. Exercise caution when administering Heparin Sodium Injection, USP to a nursing mother (see PRECAUTIONS, Pediatric Use).

    Pediatric Use

    There are no adequate and well controlled studies on heparin use in pediatric patients. Pediatric dosing recommendations are based on clinical experience (see DOSAGE AND ADMINISTRATION, Pediatric Use).

    Carefully examine all Heparin Sodium Injection syringes to confirm choice of the correct strength prior to administration of the drug. Pediatric patients, including neonates, have died as a result of medication errors in which Heparin Sodium Injection, USP vials have been confused with “catheter lock flush” vials (see WARNINGS, Fatal Medication Errors).

    Geriatric Use

    A higher incidence of bleeding has been reported in patients over 60 years of age, especially women (see PRECAUTIONS, General). Clinical studies indicate that lower doses of heparin may be indicated in these patients (see CLINICAL PHARMACOLOGY and DOSAGE AND ADMINISTRATION).

  • ADVERSE REACTIONS

    Hemorrhage

    Hemorrhage is the chief complication that may result from heparin therapy (see WARNINGS). An overly prolonged clotting time or minor bleeding during therapy can usually be controlled by withdrawing the drug (see OVERDOSAGE). It should be appreciated that gastrointestinal or urinary-tract bleeding during anticoagulant therapy may indicate the presence of an underlying occult lesion. Bleeding can occur at any site but certain specific hemorrhagic complications may be difficult to detect:

    a.   Adrenal hemorrhage, with resultant acute adrenal insufficiency, has occurred during anticoagulant therapy. Therefore, such treatment should be discontinued in patients who develop signs and symptoms of acute adrenal hemorrhage and insufficiency. Initiation of corrective therapy should not depend on laboratory confirmation of the diagnosis, since any delay in an acute situation may result in the patient’s death.

    b.   Ovarian (corpus luteum) hemorrhage developed in a number of women of reproductive age receiving short- or long-term anticoagulant therapy. This complication, if unrecognized, may be fatal.

    c.   Retroperitoneal hemorrhage.

    Thrombocytopenia, Heparin-induced Thrombocytopenia (HIT) (With or Without Thrombosis) and Delayed Onset of HIT (With or Without Thrombosis).
    See WARNINGS.

    Local Irritation

    Local irritation, erythema, mild pain, hematoma or ulceration may follow deep subcutaneous (intrafat) injection of heparin sodium. These complications are much more common after intramuscular use, and such use is not recommended.

    Hypersensitivity

    Generalized hypersensitivity reactions have been reported, with chills, fever and urticaria as the most usual manifestations, and asthma, rhinitis, lacrimation, headache, nausea and vomiting, and anaphylactoid reactions, including shock, occurring more rarely. Itching and burning, especially on the plantar side of the feet, may occur (see WARNINGS and PRECAUTIONS).

    Certain episodes of painful, ischemic and cyanosed limbs have been attributed, in the past, to allergic vasospastic reactions. Whether these are in fact identical to the thrombocytopenia associated complications remains to be determined.

    Miscellaneous

    Osteoporosis following long-term administration of high doses of heparin, cutaneous necrosis after systemic administration, suppression of aldosterone synthesis, delayed transient alopecia, priapism, and rebound hyperlipemia on discontinuation of heparin sodium have also been reported.

    Significant elevations of aminotransferase (SGOT [S-AST] and SGPT [S-ALT]) levels have occurred in a high percentage of patients (and healthy subjects) who have received heparin.

  • OVERDOSAGE

    Symptoms

    Bleeding is the chief sign of heparin overdosage. Nosebleeds, blood in urine or tarry stools may be noted as the first sign of bleeding. Easy bruising or petechial formations may precede frank bleeding.

    Treatment – Neutralization of heparin effect

    When clinical circumstances (bleeding) require reversal of heparinization, protamine sulfate (1% solution) by slow infusion will neutralize heparin sodium. No more than 50 mg should be administered, very slowly, in any 10-minute period. Each mg of protamine sulfate neutralizes approximately 100 USP heparin units. The amount of protamine required decreases over time as heparin is metabolized. Although the metabolism of heparin is complex, it may, for the purpose of choosing a protamine dose, be assumed to have a half-life of about 1/2 hour after intravenous injection.
    Administration of protamine sulfate can cause severe hypotensive and anaphylactoid reactions. Because fatal reactions often resembling anaphylaxis have been reported, the drug should be given only when resuscitation techniques and treatment of anaphylactoid shock are readily available.

    For additional information consult the labeling of Protamine Sulfate Injection, USP products.

  • DOSAGE AND ADMINISTRATION

    Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. Slight discoloration does not alter potency.

    Confirm the choice of the correct Heparin Sodium Injection vial or syringes prior to administration of the drug to a patient (see WARNINGS, Fatal Medication Errors). Heparin Sodium Injection, USP products must not be confused with “catheter lock flush” products. To lessen this risk for syringes, a cautionary statement has been added to the syringe and box/bin. Read the cautionary statement and confirm that you have selected the correct medication and strength.

    When heparin is added to an infusion solution for continuous intravenous administration, the container should be inverted at least six times to ensure adequate mixing and prevent pooling of the heparin in the solution.

    Heparin sodium is not effective by oral administration and should be given by intermittent intravenous injections, intravenous infusion, or deep subcutaneous (intrafat, i.e., above the iliac crest or abdominal fat layer) injection. The intramuscular route of administration should be avoided because of the frequent occurrence of hematoma at the injection site.

    The prefilled syringe is suitable for substances to be administered intravenously. It is intended for use with injection sets specifically manufactured as "needle-less" injection systems.

    The dosage of heparin sodium should be adjusted according to the patient’s coagulation-test results. When heparin is given by continuous intravenous infusion, the coagulation time should be determined approximately every 4 hours in the early stages of treatment. When the drug is administered intermittently by intravenous injection, coagulation tests should be performed before each injection during the early stages of treatment and at appropriate intervals thereafter. Dosage is considered adequate when the activated partial thromboplastin time (APTT) is 1.5 to 2 times normal or when the whole blood clotting time is elevated approximately 2.5 to 3 times the control value. After deep subcutaneous (intrafat) injections, tests for adequacy of dosage are best performed on samples drawn 4 to 6 hours after the injection.

    Periodic platelet counts, hematocrits, and tests for occult blood in stool are recommended during the entire course of heparin therapy, regardless of the route of administration.

    Converting to Oral Anticoagulant

    When an oral anticoagulant of the coumarin or similar type is to be begun in patients already receiving heparin sodium, baseline and subsequent tests of prothrombin activity must be determined at a time when heparin activity is too low to affect the prothrombin time. This is about 5 hours after the last intravenous bolus and 24 hours after the last subcutaneous dose. If continuous intravenous heparin infusion is used, prothrombin time can usually be measured at any time.

    In converting from heparin to an oral anticoagulant, the dose of the oral anticoagulant should be the usual initial amount and thereafter prothrombin time should be determined at the usual intervals. To ensure continuous anticoagulation, it is advisable to continue full heparin therapy for several days after the prothrombin time has reached the therapeutic range. Heparin therapy may then be discontinued without tapering.

    Therapeutic Anticoagulant Effect with Full-Dose Heparin

    Although dosage must be adjusted for the individual patient according to the results of suitable laboratory tests, the following dosage schedules may be used as guidelines:

    Method of Administration

    Frequency

    Recommended Dose

    [based on 150 lb. (68 kg) patient]

    Deep, Subcutaneous (Intrafat) Injection

    A different site should be used for each injection to prevent the development of massive hematoma.

    Initial dose

    5,000 units by intravenous injection, followed by 10,000 to 20,000 units of a concentrated solution, subcutaneously

    Every 8 hours

    or

    Every 12 hours

    8,000 to 10,000 units of a concentrated solution

    15,000 to 20,000 units of a concentrated solution

    Intermittent Intravenous Injection

    Initial dose

    10,000 units, either undiluted or in 50 or 100 mL of 0.9% Sodium Chloride Injection, USP

    Every 4 to

    6 hours

    5,000 to 10,000 units, either undiluted or in 50 to 100 mL of 0.9% Sodium Chloride Injection, USP

    Intravenous Infusion

    Initial dose

    5,000 units by intravenous injection

    Continuous

    20,000 to 40,000 units/24 hours in 1,000 mL of 0.9% Sodium Chloride Injection, USP (or in any compatible solution) for infusion

    Pediatric Use

    Use preservative-free Heparin Sodium Injection, USP in neonates and infants.

    There are no adequate and well controlled studies on heparin use in pediatric patients. Pediatric dosing recommendations are based on clinical experience. In general, the following dosage schedule may be used as a guideline in pediatric patients:

    Initial Dose75 to 100 units/kg (Intravenous bolus over 10 minutes)
    Maintenance DoseInfants: 25 to 30 units/kg/hour;
    Infants <2 months have the highest requirements (average 28 units/kg/hour)

    Children >1 year of age: 18 to 20 units/kg/hour;
    Older children may require less heparin, similar to weight-adjusted adult dosage
    MonitoringAdjust heparin to maintain a PTT of 60 to 85 seconds, assuming this reflects an anti-Factor X a level of 0.35 to 0.70

    Geriatric Use

    Patients over 60 years of age may require lower doses of heparin.

    Surgery of the Heart and Blood Vessels

    Patients undergoing total body perfusion for open-heart surgery should receive an initial dose of not less than 150 units of heparin sodium per kilogram of body weight. Frequently, a dose of 300 units of heparin sodium per kilogram of body weight is used for procedures estimated to last less than 60 minutes or 400 units per kilogram for those estimated to last longer than 60 minutes.

    Low-Dose Prophylaxis of Postoperative Thromboembolism

    A number of well-controlled clinical trials have demonstrated that low-dose heparin prophylaxis, given just prior to and after surgery, will reduce the incidence of postoperative deep vein thrombosis in the legs (as measured by the I-125 fibrinogen technique and venography) and of clinical pulmonary embolism.

    The most widely used dosage has been 5,000 units 2 hours before surgery and 5,000 units every 8 to 12 hours thereafter for 7 days or until the patient is fully ambulatory, whichever is longer. The heparin is given by deep subcutaneous injection in the arm or abdomen with a fine needle (25 to 26 gauge) to minimize tissue trauma. A concentrated solution of heparin sodium is recommended. Such prophylaxis should be reserved for patients over the age of 40 who are undergoing major surgery. Patients with bleeding disorders, those having neurosurgery, spinal anesthesia, eye surgery or potentially sanguineous operations should be excluded, as well as patients receiving oral anticoagulants or platelet-active drugs (see WARNINGS). The value of such prophylaxis in hip surgery has not been established. The possibility of increased bleeding during surgery or postoperatively should be borne in mind. If such bleeding occurs, discontinuance of heparin and neutralization with protamine sulfate is advisable. If clinical evidence of thromboembolism develops despite low-dose prophylaxis, full therapeutic doses of anticoagulants should be given unless contraindicated. All patients should be screened prior to heparinization to rule out bleeding disorders, and monitoring should be performed with appropriate coagulation tests just prior to surgery. Coagulation-test values should be normal or only slightly elevated. There is usually no need for daily monitoring of the effect of low-dose heparin in patients with normal coagulation parameters.

    Extracorporeal Dialysis

    Follow equipment manufacturers’ operating directions carefully.

    Blood Transfusion

    Addition of 400 to 600 USP units per 100 mL of whole blood is usually employed to prevent coagulation.
    Usually, 7,500 USP units of heparin sodium are added to 100 mL of 0.9% Sodium Chloride Injection, USP (or 75,000 USP units per 1,000 mL of 0.9% Sodium Chloride Injection) and mixed; from this sterile solution, 6 mL to 8 mL are added per 100 mL of whole blood.

    Laboratory Samples

    Addition of 70 to 150 units of heparin sodium per 10 to 20 mL sample of whole blood is usually employed to prevent coagulation of the sample. Leukocyte counts should be performed on heparinized blood within two hours after addition of the heparin. Heparinized blood should not be used for isoagglutinin, complement, or erythrocyte fragility tests or platelet counts.

    Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. Slight discoloration does not alter potency.
    NOTE: To prevent needle-stick injuries, needles should not be recapped, purposely bent, or broken by hand.

  • HOW SUPPLIED

    (derived from porcine intestinal mucosa)

    Heparin Sodium Injection, USP, is available in Prefilled Syringe Needle Units. Each prefilled syringe contains the following concentration of heparin sodium:
    5,000 USP Units per 0.5 mL (10, 000 USP Units per mL)
    NDC 0264-5705-10 REF PFS5705 (27 gauge x ½ inch needle), in packages of 10 prefilled syringes.

    Store at 20°-25°C (68°-77°F) [See USP Controlled Room Temperature].
    Do not freeze.
    Do not use if solution is discolored or contains precipitate.

  • REFERENCES

    1. Tahata T, Shigehito M, Kusuhara K, Ueda Y, et al. Delayed-Onset of Heparin Induced Thrombocytopenia – A Case Report – J Jpn Assn Torca Surg. 1992;40(3):110-111.
    2. Warkentin T, Kelton J. Delayed-Onset Heparin-Induced Thrombocytopenia and Thrombosis. Annals of Internal Medicine. 2001;135:502-506.
    3. Rice L, Attisha W, Drexler A, Francis J. Delayed-Onset Heparin Induced Thrombocytopenia. Annals of Internal Medicine, 2002;136:210-215.
    4. Dieck, J., C. Rizo-Patron, et al. (1990). “A New Manifestation and Treatment Alternative for Heparin-Induced Thrombosis.” Chest. 1990; 98:1524-26.
    5. Smythe M, Stephens J, Mattson. Delayed-Onset Heparin Induced Thrombocytopenia. Annals of Emergency Medicine, 2005;45(4):417-419.
    6. Divgi A. (Reprint), Thumma S., Hari P., Friedman K., Delayed Onset Heparin-Induced Thrombocytopenia (HIT) Presenting After Undocumented Drug Exposure as Post-Angiography Pulmonary Embolism. Blood. 2003;102(11):127b.
  • Directions for Use Heparin Sodium Injection, USP

    Read this Directions for Use before you inject Heparin Sodium Injection and each time you get a refill. There may be new information. This leaflet does not take the place of talking to your healthcare provider about your medical condition or treatment.

    Important information:

    • Do not inject yourself or someone else until you have been shown how to inject Heparin Sodium Injection using the prefilled syringe.
    • Your healthcare provider or nurse will show you how to inject Heparin Sodium Injection properly using the prefilled syringe with needle shield; and how to cover the needle after injection. The needle shield will help prevent needle stick injuries to anyone who handles the prefilled syringe.
    • Keep the Heparin Sodium Injection prefilled syringe in the blister packaging until you are ready to use it.
    • Heparin Sodium Injection prefilled syringes are for single, one-time use only. Do not re-use a Heparin Sodium Injection prefilled syringe.
    • The prefilled syringe may have air bubbles. To avoid loss of medicine when using the prefilled syringe, do not push out (expel) any air bubbles from the prefilled syringe before giving the injection.

    Heparin Sodium Injection prefilled syringe parts:

    syringe

    Directions for Subcutaneous Injection of Heparin Sodium Injection

     Step 1: Gather supplies needed for your injection
    Included in the Heparin Sodium Injection box:
    • A Heparin Sodium Injection prefilled syringe. Make sure you have the right medicine at the right dose.
    Not included in the box:
    • 1 alcohol wipe
    • sharps disposal container
    • 1 piece of gauze
    • 1 adhesive bandage (optional)
    step-1

     Step 2: Wash your hands well with soap and water

    Dry your hands.

    step-2
     Step 3: Remove the prefilled syringe from the blister packaging
    Do not remove by pulling on the plunger as this may damage the syringe. Place the syringe on a flat surface.
    step-3
     Step 4: Choose and clean your injection site.
    Sit or lie down in a comfortable position. Choose an injection site on your stomach area (abdomen) to give your injection.
    • Choose a different injection site each time you give yourself an injection, alternating between the left and right side of your stomach area.
    • Clean the injection site with the alcohol wipe. Let it dry before injecting.
    step-4

    Step 5: Prepare the prefilled syringe.

    • Pick up the prefilled syringe. Bend the needle shield towards the body of the prefilled syringe by approximately a 90-degree angle.
    • Hold the body of the prefilled syringe firmly in one hand. Remove the protective needle cap by pulling it straight off the syringe. Throw away the needle cap in the sharps disposal container.


    Do not touch the needle or let it come in contact with any surface before you give your injection.

    step-5
     Step 6: Give your injection.
    • Gently pinch the skin that has been cleaned to make a fold. Hold the fold between the thumb and the forefinger of one hand.
    • Using the other hand, hold the prefilled syringe firmly and insert the full length of the needle at a 90-degree angle into the skin fold. The skin fold should be held during the entire injection.
    • Inject all the medicine in the prefilled syringe by pressing down on the plunger as far as it will go. Inject the product slowly. When all the medicine has been injected, remove the needle from the skin fold.
    • Press the injection site with a piece of gauze for a few seconds. To minimize bruising, do not rub the injection site after you have given your injection. There may be a small amount of blood at the injection site. You may cover the injection site with a small adhesive bandage if needed
    step-6
     Step 7: Secure needle in needle shield.
    Do not try to secure the needle in the needle shield with your fingers. Secure the needle in the groove of the safety shield by pressing it against a stable surface.
    step-7

     Step 8: Dispose of used Heparin Sodium Injection prefilled syringes.
    Put the used prefilled syringe in a FDA-cleared sharps disposal container right away after use. Do not throw away (dispose of) the prefilled syringe in the household trash. If you do not have a FDA-cleared sharps disposal container, you may use a household container that is:

    • Made of heavy-duty plastic.
    • Can be closed with a tight-fitting, puncture-resistant lid, without sharps being able to come out.
    • Upright and stable during use.
    • Leak-resistant, and
    • Properly labeled to warn of hazardous waste inside the container.

    When your sharps disposal container is almost full, you will need to follow you community guidelines for the right way to dispose of your sharps disposal container. There may be state or local laws about how you should throw away used needles and syringes. For more information about safe sharps disposal, and for specific information about sharps disposal in the state you live in, go to the FDA’s website at: http://www.fda.gov/safesharpsdisposal.

    • Do not reuse the prefilled syringe.
    • Do not throw away (dispose of) your used sharps disposal container in your household trash unless your community guidelines permit this.
    • Do not recycle your used sharps disposal container.

    Important: Always keep the sharps disposal container out of the reach of children.

    step-8

    How should I store Heparin Sodium Injection prefilled syringes?

    • Store at 68ºF to 77°F (20°C to 25°C).
    • Do not freeze

    Keep Heparin Sodium Injection prefilled syringes and all medicines out of the reach of children.

    Intravenous Injection of Heparin Sodium Technique
    For intravenous injection, the multiple-dose vial should be used. Heparin Sodium Injection USP should be administered through an intravenous line. Heparin Sodium Injection USP should not be mixed or co-administered with other medications. To avoid the possible mixture of Heparin Sodium Injection USP with other drugs, the intravenous access chosen should be flushed with a sufficient amount of saline or dextrose solution prior to and following the intravenous bolus administration of Heparin Sodium Injection USP to clear the port of drug.


    Heparin Sodium Injection USP may be safely administered with normal saline solution (0.9%). (See DOSAGE AND ADMINISTRATION).

    This Directions for Use has been approved by the U.S. Food and Drug Administration.

    To report SUSPECTED ADVERSE REACTIONS, contact B. Braun Medical Inc. at 1-800-854-6851 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.


    Not made with natural rubber latex. Rx Only

    Manufactured by:
    Sterinova Inc.
    St. Hyacinthe, QC, Canada J2S 0J9

    Distributed by:
    B. Braun Medical Inc.
    Bethlehem, PA 18018-3524 USA
    1-800-227-2862

    Prepared in Canada. API from Spain.

    LD-589-1

    Issued: July/2018

  • PRINCIPAL DISPLAY PANEL

    Blister Label

    blister label

    Pack Label

    pack label

    Syringe Label

    syringe label
  • INGREDIENTS AND APPEARANCE
    HEPARIN SODIUM 
    heparin sodium injection
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:0264-5705
    Route of AdministrationINTRAVENOUS, SUBCUTANEOUS
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    HEPARIN SODIUM (UNII: ZZ45AB24CA) (HEPARIN - UNII:T2410KM04A) HEPARIN5000 [USP'U]  in 0.5 mL
    Inactive Ingredients
    Ingredient NameStrength
    WATER (UNII: 059QF0KO0R)  
    HYDROCHLORIC ACID (UNII: QTT17582CB)  
    SODIUM HYDROXIDE (UNII: 55X04QC32I)  
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:0264-5705-1010 in 1 CARTON04/08/2019
    1NDC:0264-5705-051 in 1 BLISTER PACK
    10.5 mL in 1 SYRINGE; Type 2: Prefilled Drug Delivery Device/System (syringe, patch, etc.)
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    ANDAANDA20882704/08/2019
    Labeler - B. Braun Medical Inc. (002397347)