CYSTEINE HYDROCHLORIDE- cysteine hydrochloride injection
Baxter Healthcare Corporation
----------
HIGHLIGHTS OF PRESCRIBING INFORMATIONThese highlights do not include all the information needed to use cysteine hydrochloride injection, USP safely and effectively. See full prescribing information for cysteine hydrochloride injection, USP.
Cysteine hydrochloride injection, USP, for intravenous use Initial U.S. Approval: 1971 INDICATIONS AND USAGECysteine hydrochloride injection, USP is a sulfur-containing amino acid indicated for use as an additive to amino acids solutions to meet nutritional requirements of neonates (preterm and term infants less than one month of age) requiring total parenteral nutrition. (1) DOSAGE AND ADMINISTRATION
DOSAGE FORMS AND STRENGTHSInjection: 500 mg/10 mL (50 mg/mL) cysteine hydrochloride, USP in a single-dose vial. (3) CONTRAINDICATIONSWARNINGS AND PRECAUTIONS
ADVERSE REACTIONSMost common adverse reactions are local reactions (warm sensation, erythema, phlebitis, and thrombosis at the infusion site), generalized flushing, fever, nausea, and metabolic acidosis. (6) To report SUSPECTED ADVERSE REACTIONS, contact Baxter Healthcare Corporation at 1-866-888-2472 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch. See 17 for PATIENT COUNSELING INFORMATION. Revised: 4/2022 |
Cysteine hydrochloride injection, USP is indicated for use as an additive to amino acids solutions to meet nutritional requirements of neonates (preterm and term infants less than one month of age) requiring total parenteral nutrition.
Cysteine hydrochloride injection, USP is for intravenous infusion after dilution and admixing use only. Prior to administration, cysteine hydrochloride injection, USP must be diluted and used as an admixture in parenteral nutrition solutions.
The resulting solution is for intravenous infusion into a central or peripheral vein. The choice of a central or peripheral venous route should depend on the osmolarity of the final infusate. Solutions with osmolarity of 900 mOsm/L or greater must be infused through a central catheter [see Warnings and Precautions (5.2)].
Stability and Storage
The dosage of the final parenteral nutrition solution containing cysteine hydrochloride injection, USP must be based on the concentrations of all components in the solution and the recommended nutritional requirements [see Dosage and Administration (2.5)]. Consult the prescribing information of all added components to determine the recommended nutritional requirements.
The dosage of cysteine hydrochloride injection, USP should be individualized based on the patient’s clinical condition (ability to adequately metabolize amino acids), body weight and nutritional/fluid requirements, as well as additional energy given orally/enterally to the patient. Prior to initiating parenteral nutrition, the following patient information should be reviewed: review of all medications, gastrointestinal function and laboratory data (such as electrolytes (including magnesium, calcium, and phosphorus), glucose, urea/creatinine, liver panel, and complete blood count.
Prior to administration of parenteral nutrition solution containing cysteine hydrochloride injection, USP, correct severe fluid, electrolyte and acid-base disorders.
The recommended dosage and volume of cysteine hydrochloride injection, USP is based upon the recommended daily protein (amino acid) requirements.
Table 1. Recommended Daily Dosage of cysteine hydrochloride injection, USP in Neonates (Preterm and Term Infants Less Than One Month of Age)
|
|||
Dosage |
Protein* Requirement |
Dosage |
Volume |
Neonates |
3 to 4 |
22 |
0.44 |
Cysteine hydrochloride injection, USP contains 50 mg/mL of cysteine hydrochloride (equivalent to 34.5 mg/mL of cysteine). Therefore, the recommended dosage of cysteine hydrochloride injection, USP provides 15 mg cysteine/gram of amino acids for neonates.
Injection: 500 mg/10 mL (50 mg/mL) cysteine hydrochloride, USP as a clear, colorless, sterile solution in a single-dose vial.
Cysteine hydrochloride injection, USP is contraindicated in:
Pulmonary vascular precipitates causing pulmonary vascular emboli and pulmonary distress have been reported in patients receiving parenteral nutrition. In some fatal cases, pulmonary embolism occurred as a result of calcium phosphate precipitates. Precipitation following passage through an in-line filter and suspected in vivo precipitate formation has also been reported. If signs of pulmonary distress occur, stop the parenteral nutrition infusion and initiate a medical evaluation. In addition to inspection of the solution [see Dosage and Administration (2.1, 2.2)], the infusion set and catheter should also periodically be checked for precipitates.
Cysteine hydrochloride injection, USP must be diluted and used as an admixture in parenteral nutrition solutions. Solutions with an osmolarity of 900 mOsm/L or greater must be infused through a central catheter [see Dosage and Administration (2.1)]. The infusion of hypertonic nutrient injections into a peripheral vein may result in vein irritation, vein damage, and/or thrombosis. The primary complication of peripheral access is venous thrombophlebitis, which manifests as pain, erythema, tenderness or a palpable cord. Remove the catheter as soon as possible, if thrombophlebitis develops.
Intravenous infusion of amino acids may induce a rise in blood urea nitrogen (BUN), especially in patients with impaired hepatic or renal function. Appropriate laboratory tests should be performed periodically and infusion discontinued if BUN levels exceed normal postprandial limits and continue to rise. It should be noted that a modest rise in BUN normally occurs as a result of increased protein intake.
Administration of amino acid solutions in the presence of impaired renal function may augment an increasing BUN, as does any protein dietary component.
Administration of cysteine hydrochloride injection, USP may result in metabolic acidosis in neonates.
Administration of amino acid solutions to a patient with hepatic impairment may result in serum amino acid imbalances, metabolic alkalosis, prerenal azotemia, hyperammonemia, stupor and coma.
Frequent clinical evaluation and laboratory determinations are necessary for proper monitoring of acid-base balance during parenteral nutrition therapy. Significant deviations from normal concentrations may require the use of additional electrolyte supplements.
Hepatobiliary disorders are known to develop in some patients, including neonates, without preexisting liver disease who receive parenteral nutrition, including cholecystitis, cholelithiasis, cholestasis, hepatic steatosis, fibrosis and cirrhosis, possibly leading to hepatic failure. The etiology of these disorders is thought to be multifactorial and may differ between patients.
Instances of asymptomatic hyperammonemia have been reported in patients receiving parenteral nutrition without overt liver dysfunction. The mechanisms of this reaction are not clearly defined but may involve genetic defects and immature or subclinically impaired liver function [see Contraindications (4), Use in Specific Populations (8.4)]
Hyperammonemia is of special significance in infants, as it can result in neurocognitive delays. Monitor liver function parameters and ammonia levels during treatment with cysteine hydrochloride injection, USP. Patients developing signs of hepatobiliary disorders should be assessed early by a clinician knowledgeable in liver diseases in order to identify possible causative and contributory factors, and possible therapeutic and prophylactic interventions.
Cysteine hydrochloride injection, USP contains aluminum that may be toxic.
Aluminum may reach toxic levels with prolonged parenteral administration in patients with renal impairment. Neonates and preterm infants are particularly at risk for aluminum toxicity because their kidneys are immature, and they require large amounts of calcium and phosphate solutions, which also contain aluminum.
Patients with renal impairment including neonates and preterm infants, who receive greater than 4 to 5 mcg/kg/day of parenteral aluminum can accumulate aluminum to levels associated with central nervous system and bone toxicity. Tissue loading may occur at even lower rates of administration.
Exposure to aluminum from cysteine hydrochloride injection, USP is not more than 0.25 mcg/kg/day when preterm and term neonates are administered the recommended maximum dosage of cysteine hydrochloride injection, USP (22 mg cysteine hydrochloride/g of amino acids and 4 g of amino acids/kg/day) [see Dosage and Administration (2.5)]. When prescribing cysteine hydrochloride injection, USP for use in parenteral nutrition containing other small volume parenteral products, the total daily patient exposure to aluminum from the admixture should be considered and maintained at no more than 5 mcg/kg/day [see Use in Specific Populations (8.4)].
Monitor fluid and electrolyte status, serum osmolarity, blood glucose, liver and kidney function, ammonia levels, blood count and coagulation parameters throughout treatment [see Dosage and Administration (2.4)].
The following serious adverse reactions are discussed in greater detail in other sections of the prescribing information:
Adverse reactions with the use of cysteine hydrochloride injection were identified in clinical studies or postmarketing reports. Because these reactions are reported voluntarily from a population of uncertain size, it is not always possible to estimate their frequency reliably or to establish a causal relationship to drug exposure.
Risk Summary
Cysteine hydrochloride injection, USP for use as an additive to amino acid solutions to meet nutritional requirements is not indicated for use in adults. Appropriate administration of cysteine hydrochloride injection, USP is not expected to cause major birth defects, miscarriage or adverse maternal or fetal outcomes. Animal reproduction studies have not been conducted with cysteine hydrochloride.
Risk Summary
Cysteine hydrochloride injection, USP is used as an additive to amino acid solutions to meet nutritional requirements of neonates requiring total parenteral nutrition and is not indicated for use in adults. There are no data on the presence of cysteine hydrochloride in human or animal milk or the effects on milk production. Data available on the effects of cysteine hydrochloride on infants, either directly or through breastmilk, do not suggest a significant risk of adverse reactions from exposure.
Cysteine hydrochloride injection, USP is indicated for use as an additive to amino acid solutions to meet the nutritional requirements of neonates, including preterm infants, requiring total parenteral nutrition. The safety profile for cysteine hydrochloride injection, USP use in neonates includes risks of acid-base imbalance and hepatobiliary dysfunction.
Acid-base imbalance, including metabolic acidosis, and liver dysfunction may occur with cysteine hydrochloride injection, USP administration in preterm infants. Frequent clinical and laboratory assessments are necessary to monitor and manage fluid balance, electrolyte concentrations, liver tests, and acid-base balance during parenteral nutrition therapy [see Warnings and Precautions (5.4)].
Hyperammonemia is of special significance in neonates. This reaction appears to be related to a deficiency of the urea cycle amino acids of genetic or product origin. It is essential that blood ammonia be measured during treatment [see Warnings and Precautions (5.5)].
Because of immature renal function, neonates including preterm infants, receiving prolonged parenteral nutrition with cysteine hydrochloride injection, USP may be at higher risk of aluminum toxicity [see Warnings and Precautions (5.7)].
In the event of over hydration or solute overload, re-evaluate the patient and institute appropriate corrective measures [see Warnings and Precautions (5.3, 5.4, 5.5, 5.7)].
Cysteine hydrochloride injection, USP (cysteine hydrochloride injection) is a sterile, nonpyrogenic solution for intravenous use supplied as 500 mg/10 mL cysteine hydrochloride, USP in a single-dose vial.
Each mL of cysteine hydrochloride injection, USP contains 50 mg of cysteine hydrochloride, (equivalent to 34.5 mg of cysteine), and 0.006 mL of hydrochloric acid (6M) in water for injection. Sodium hydroxide and/or hydrochloric acid are used as needed to adjust the pH. The pH range of cysteine hydrochloride injection, USP is 1.0 to 1.5.
The active ingredient is cysteine hydrochloride. The chemical name of cysteine hydrochloride is L-cysteine hydrochloride monohydrate. Its molecular formula is C3H7NO2S • HCI • H2O and molecular weight is 175.63. The chemical structure of L-cysteine hydrochloride monohydrate is depicted below:
Cysteine hydrochloride is a white crystalline powder soluble in water. Cysteine is a sulfur-containing amino acid and is prone to oxidation when exposed to air in aqueous solution, which may convert cysteine to insoluble cystine resulting in precipitation over time.
Cysteine hydrochloride injection, USP contains no more than 145 mcg/L of aluminum.
Endogenous cysteine is synthesized from methionine by the enzyme, cystathionase, via the trans-sulfuration pathway, and serves as a precursor substrate for both glutathione and taurine. Cysteine hydrochloride injection, USP provides cysteine to the systemic circulation of neonates who require parenteral nutrition and cannot synthesize adequate quantities of cysteine due to deficient cystathionase activity.
1. Ayers P. et al. A.S.P.E.N. Parenteral Nutrition Handbook, 2nd ed. 2014 pg. 123 and 124.
Cysteine hydrochloride injection, USP (cysteine hydrochloride injection) is a clear, colorless, sterile and nonpyrogenic solution supplied as follows:
500 mg/10 mL (50 mg/mL) of cysteine hydrochloride, USP in single-dose vials (NDC 0338-
9645-01), packaged as 5 vials per carton (NDC 0338-9645-01)
Store cysteine hydrochloride injection, USP at 20°C to 25°C (68°F to 77°F); excursions
permitted to 15°C to 30°C (59°F to 86°F) [see USP Controlled Room Temperature].
Protect from light. Avoid excessive heat. Protect from freezing. If accidentally frozen, discard
the vial.
Vial stoppers are not made with natural rubber latex.
For storage of admixed solution see Dosage and Administration (2.3)
Inform caregivers or home healthcare providers of the following risks of cysteine hydrochloride injection, USP:
Manufactured for:
Baxter Healthcare Corporation,
Deerfield, IL 60015, USA
Baxter is a registered trademark of Baxter International Inc.
Rev. 04/22
07-19-00-4043
NDC 0338-9645-01
Rx only
Cysteine hydrochloride injection, USP
500 mg/10 mL (50 mg/mL)
Must be Diluted. For Intravenous
Infusion Only
Sterile
10 mL Single-Dose Vial
Discard Unused Portion
Each mL contains: 50 mg cysteine hydrochloride
(equivalent to 34.5 mg of cysteine), and 0.006 mL
of hydrochloric acid (6M) in water for injection.
Sodium hydroxide and/or hydrochloric acid are
used as needed to adjust the pH to 1.0 to 1.5.
Contains no more than 145 mcg/l of aluminum.
Storage: Store at 20°C to 25°C (68°F to
77°F ), excursions permitted to 15° to 30°C
(59°F to 86°F) [see USP Controlled Room
Temperature]. Do not freeze.
Recommended Dosage:
See prescribing information.
Mfd. for Baxter Healthcare Corp
Rev 03/22
07-09-00-1048
For Position Box Only
LOT: XXXXXX
EXP: YYYY-MM-DD
NDC 0338-9645-01
Rx Only
Cysteine hydrochloride injection, USP
500 mg/10 mL (50 mg/mL)
Must be Diluted. For Intravenous Infusion Only
5 x 10 mL Single-Dose Vials – Discard Unused Portion
Reserved for 2D barcode
GTIN XXXXXXXXXXXXXX
SN XXXXXXXXXXXXXX
LOT XXXXXX
EXP YYY-MD-DD
NDC 0338-9645-01
Rx Only
Cysteine hydrochloride injection, USP
500 mg/10 mL (50 mg/mL)
Must be Diluted. For Intravenous Infusion Only
Contains no more than 145 mcg/L of aluminum
Sterile
5 x 10 mL Single-Dose Vials – Discard Unused Portion
07-03-00-0794
Each mL of cysteine hydrochloride injection, USP
contains: 50mg of cysteine hydrochloride (equivalent
to 34.5 mg of cysteine), and 0.006 mL of hydrochloric
acid (6M) in water for injection. Sodium hydroxide or
hydrochloric acid are used as needed to adjust the
pH. The pH range is 1.0 to 1.5.
Storage: Store at 20°C to 25°C (68°F to 77°F ),
excursions permitted to 15°C to 30°C (59°F to 86°F )
[see USP Controlled Room Temperature]. Protect
from light. Avoid excessive heat. Protect from
freezing. If accidently frozen, discard the vial.
Directions for Use: For single use only. Discard
unused portion of the vial of cysteine hydrochloride
injection, USP. Use parenteral nutrition solution
containing cysteine hydrochloride injection, USP
promptly after mixing. Any storage of the
admixture should be under refrigeration at 2°C to
8°C (36°F to 46°F) and limited to brief period of
time, no longer than 24 hours. After removal from
refrigeration, inspect for precipitates, use
promptly, and complete the infusion within 24
hours. Discard if any precipitates are observed.
Discard any remaining admixture. Protect
parenteral nutrition solution from light.
Recommended Dosage:
See prescribing information.
NDC 0338-9645-01
Cysteine hydrochloride injection, USP
500 mg/10 mL (50 mg/mL)
Must be Diluted. For Intravenous Infusion Only
Contains no more than 145 mcg/L of aluminum
5 x 10 mL Single-Dose Vials- Discard Unused Portion
For Position Only Box
Baxter
Baxter is a registered trademark
of Baxter International Inc.
Manufactured for
Baxter Healthcare Corporation,
Deerfield, IL 60015, USA
Rev 03/2022
CYSTEINE HYDROCHLORIDE
cysteine hydrochloride injection |
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
Labeler - Baxter Healthcare Corporation (005083209) |