Active ingredient – 10.5 mL Applicator

Isopropyl alcohol 70% v/v

Purpose – 10.5 mL Applicator

Antiseptic

Uses – 10.5 mL Applicator

▪

for preparation of the skin prior to surgery

▪

helps reduce bacteria that potentially can cause skin infection

Warnings – 10.5 mL Applicator

For external use only. Flammable, keep away from fire or flame.
To reduce risk of fire, PREP CAREFULLY:

▪

solution contains alcohol and gives off flammable vapors

▪

avoid getting solution into hairy areas. Wet hair is flammable. Hair may take up to 1 hour to dry.

▪

do not drape or use ignition source (e.g., cautery, laser) until solution is completely dry (minimum of 3 minutes on hairless skin; up to 1 hour in hair)

▪

do not allow solution to pool

▪

remove wet materials from prep area

Directions – 10.5 mL Applicator

Follow all directions for use

▪

use with care in premature infants or infants under 2 months of age.
These products may cause irritation or chemical burns.

▪

do not use when the sponge is already wet upon opening the package

▪

discard the applicator after a single use along with any portion of the
solution which is not required to cover the prepped area. It is not
necessary to use the entire amount available.

Getting Patient Ready for Solution:

▪

use in well-ventilated area

▪

do not microwave or heat the solution applicator

▪

apply to clean, completely dry, residue-free, intact skin

▪

when hair removal is necessary, use a surgical clipper on the morning of
the surgery. If a wet shave is used, thoroughly remove all soap residues.

Activating the Applicator:

▪

remove applicator from package; do not touch sponge

▪

hold the applicator with the sponge down. Depress the end cap/button
to release the antiseptic, solution will flow into the sponge.

When Applying Solution:

▪

completely wet the treatment area with antiseptic

▪

dry surgical sites (such as the abdomen or arm):
use repeated back-and-forth strokes for 30 seconds

▪

moist surgical sites (such as inguinal fold):
use repeated back-and-forth strokes for 2 minutes

▪

maximal treatment area for one applicator is approximately 8.4 in. x 8.4 in.
(457 cm2)

▪

do not allow solution to pool; tuck prep towels to absorb solution, and
then remove

▪

avoid getting solution into hairy areas. Wet hair is flammable. Hair may
take up to 1 hour to dry.

After Applying Solution:

▪

to reduce the risk of fire, wait until solution is completely dry
(minimum of 3 minutes on hairless skin; up to 1 hour in hair)

While Waiting for Solution to Completely Dry:

▪

do not drape or use ignition source (e.g., cautery, laser)

▪

check for pooled solution. Use sterile gauze to soak up pooled solution.
Do not blot or wipe away because it may remove solution from skin.

▪

remove wet materials from prep area. Replace if necessary.

After Solution is Completely Dry:

▪

to reduce the risk of fire, begin draping and/or using cautery only after
solution is completely dry and all wet materials are removed

▪

if incise drapes are used, apply directly to dry prep

▪

apply dressing following standard practices

Other information – 10.5 mL Applicator

▪

store between 15-30oC (59-86oF)

▪

avoid freezing and excessive heat above 40oC (104oF)

▪

the tint will slowly fade from the skin. Soap and water, or alcohol may be used to remove tint if desired.

Inactive ingredients – 10.5 mL Applicator

citric acid, methylene blue, methylparaben, propylparaben, purified water USP, trisodium citrate

Questions? – 10.5 mL Applicator

call 1-833-342-2798 (M-F 8AM-5PM CST).
www.zurexpharma.com

Active ingredient – 26 mL Applicator

Isopropyl alcohol 70% v/v

Purpose – 26 mL Applicator

Antiseptic

Uses – 26 mL Applicator

▪

for preparation of the skin prior to surgery

▪

helps reduce bacteria that potentially can cause skin infection

Warnings – 26 mL Applicator

For external use only. Flammable, keep away from fire or flame.
To reduce risk of fire, PREP CAREFULLY:

▪

do not use 26-mL applicator for head and neck surgery

▪

do not use on an area smaller than 8.4 in x 8.4 in. Use a smaller applicator instead.

▪

solution contains alcohol and gives off flammable vapors

▪

avoid getting solution into hairy areas. Wet hair is flammable. Hair may take up to 1 hour to dry.

▪

do not drape or use ignition source (e.g., cautery, laser) until solution is completely dry (minimum of 3 minutes on hairless skin; up to 1 hour in hair)

▪

do not allow solution to pool

▪

remove wet materials from prep area

Directions – 26 mL Applicator

Follow all directions for use

▪

use with care in premature infants or infants under 2 months of age.
These products may cause irritation or chemical burns.

▪

do not use when the sponge is already wet upon opening the package

▪

discard the applicator after a single use along with any portion of the
solution which is not required to cover the prepped area. It is not
necessary to use the entire amount available.

Getting Patient Ready for Solution:

▪

use in well-ventilated area

▪

do not microwave or heat the solution applicator

▪

apply to clean, completely dry, residue-free, intact skin

▪

when hair removal is necessary, use a surgical clipper on the morning of
the surgery. If a wet shave is used, thoroughly remove all soap residues.

Activating the Applicator:

▪

remove applicator from package; do not touch sponge

▪

hold the applicator with the sponge down. Depress the end cap/button
to release the antiseptic, solution will flow into the sponge.

When Applying Solution:

▪

completely wet the treatment area with antiseptic

▪

dry surgical sites (such as the abdomen or arm):
use repeated back-and-forth strokes for 30 seconds

▪

moist surgical sites (such as inguinal fold):
use repeated back-and-forth strokes for 2 minutes

▪

maximal treatment area for one applicator is approximately 13.2 in. x 13.2 in.
(1126 cm2)

▪

do not allow solution to pool; tuck prep towels to absorb solution, and
then remove

▪

avoid getting solution into hairy areas. Wet hair is flammable. Hair may
take up to 1 hour to dry.

After Applying Solution:

▪

to reduce the risk of fire, wait until solution is completely dry
(minimum of 3 minutes on hairless skin; up to 1 hour in hair)

While Waiting for Solution to Completely Dry:

▪

do not drape or use ignition source (e.g., cautery, laser)

▪

check for pooled solution. Use sterile gauze to soak up pooled solution.
Do not blot or wipe away because it may remove solution from skin.

▪

remove wet materials from prep area. Replace if necessary.

After Solution is Completely Dry:

▪

to reduce the risk of fire, begin draping and/or using cautery only after
solution is completely dry and all wet materials are removed

▪

if incise drapes are used, apply directly to dry prep

▪

apply dressing following standard practices

Other information – 26 mL Applicator

▪

store between 15-30oC (59-86oF)

▪

avoid freezing and excessive heat above 40oC (104oF)

▪

the tint will slowly fade from the skin. Soap and water, or alcohol may be used to remove tint if desired.

Inactive ingredients – 26 mL Applicator

citric acid, methylene blue, methylparaben, propylparaben, purified water USP, trisodium citrate

Questions? – 26 mL Applicator

call 1-833-342-2798 (M-F 8AM-5PM CST) www.zurexpharma.com

Principal Display Panel – 10.5 mL Applicator Label

Single Use
NDC 49823-100-01

ZuraGardTM
Isopropyl Alcohol (70% v/v) Solution
Patient Preoperative Skin Preparation

Non-sterile Solution
Applicator is sterile if package is intact
Surgical Solution
For head, neck, and small prep areas

BLUE
10.5 mL (0.36 fl oz) APPLICATOR

Professional Use Only
Do not reuse
Not made with natural rubber latex

Warning
Flammable
Keep away from fire or flame.
To reduce risk of fire, PREP CAREFULLY:

▪

solution contains alcohol and gives
off flammable vapors

▪

avoid getting solution into hairy
areas. Wet hair is flammable. Hair
may take up to 1 hour to dry.

▪

do not drape or use ignition source
(e.g., cautery, laser) until solution is
completely dry (minimum of 3
minutes on hairless skin; up to 1
hour in hair)

▪

do not allow solution to pool

▪

remove wet material from prep area

 
Manufactured for
Zurex Pharma, Inc.
Middleton, WI 53562

Label

Principal Display Panel – 26 mL Applicator Label

Single Use
NDC 49823-100-02

ZuraGardTM
Isopropyl Alcohol (70% v/v) Solution
Patient Preoperative Skin Preparation

Non-sterile Solution
Applicator is sterile if package is intact
Surgical Solution
For large prep areas below the neck

BLUE
26 mL (0.9 fl oz) APPLICATOR

Professional Use Only
Do not reuse
Not made with natural rubber latex

Warning
Flammable
Keep away from fire or flame.
To reduce risk of fire, PREP CAREFULLY:

▪

do not use 26-mL applicator for
head and neck surgery, or on an
area smaller than 8.4 in. x 8.4 in.
Use a smaller applicator instead.

▪

solution contains alcohol and gives
off flammable vapors

▪

avoid getting solution into hairy
areas. Wet hair is flammable.
Hair may take up to 1 hour to dry.

▪

do not drape or use ignition source
(e.g., cautery, laser) until solution is
completely dry (minimum of 3
minutes on hairless skin; up to 1
hour in hair)

▪

do not allow solution to pool

▪

remove wet material from prep area

 
Manufactured for
Zurex Pharma, Inc.
Middleton, WI 53562

Label