Uses
for flushing the eye to reduce chances of severe injury caused by acid, alkali, or particulate contamination
Warnings
For external use only.
Do not use
- in concentrated form
- while wearing contact lenses
- if solution changes color or becomes cloudy
- for injection
- in intraocular surgery
- internally
- if eye is lacerated or object is embedded
Directions
- prepare sufficient quantity of constituted eyewash solution in advance of an emergency
- when preparing solution, wear protective eyewear and gloves and follow sanitary procedures
- prepare eyewash solution by diluting 1 part concentrate to 60 parts of potable water as follows:
- measure 1/3 of required amount of potable water into mixing container of eyewash unit
- to this, add 1/3 of required amount of concentrate
- agitate or mix thoroughly
- repeat two more times until required amount of solution is prepared
- discard prepared solution after 6 months
Inactive ingredients benzalkonium chloride, edetate disodium, sodium chloride, sodium phosphate dibasic, sodium phosphate monobasic
Honeywell
DO NOT USE IF SEAL IS BROKEN OR MISSING
eyesaline®
EMERGENCY EYEWASH CONCENTRATE
When mixed according to directions, Eyesaline Concentrate and water will provide a buffered, preserved saline solution for flushing or irrigating the eyes.
MUST BE DILUTED
32 fl. oz. (946 mL)
Distributed by Honeywell Safety Products USA, Inc. Smithfield, RI, 02917
