OXYGEN- oxygen gas 
A & E Mill & Welding Supply Company

----------

oxygen

OXYGEN, COMPRESSED USP UN1072
PRODUCED BY AIR LIQUIFACTION
OXYGEN 2
WARNING: For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation. For all other medical application, Rx only. Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effect on oxygen content of arterial blood, may be harmful. Do not attempt to use on patients who have stopped breathing unless used in conjunction with resuscitative equipment. Keep out of reach of children. Federal law requires that this container be refilled with oxygen USP only by establishments registered as a drug manufacturer in accordance with the Federal Food, Drug and Cosmetic Act. DANGER: MAY CAUSE OR INTENCIFY FIRE; OXYDIZER. CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED. Do not handle until all safety precautions have been read and understood. Keep and store away from clothing and other combustible materials. Keep valves and fittings free from grease and oil. Use and store only outdoors or in a well-ventilated place. In case of fire; Stop leak if safe to do so. Use a back flow preventive device in the piping. Use only with equipment of compatible materials of construction and rated for cylinder pressure. Use only with equipment cleaned for oxygen service. Open valve slowly. Close valve after each use and when empty. Protect from sunlight when ambient temperature exceeds 52 C (125 F). Read and follow the Safety Data Sheet (SDS) before use. CAS: 7782-44-7
DO NOT REMOVE THIS PRODUCT LABEL

A and E MILL and WELDING SUPPLY COMPANY

920 INDUSTIAL BLVD

LONE STAR TX 75668 . 903-565-3485

CONTENTS: LTRS CU. FT.oxygen

OXYGEN 
oxygen gas
Product Information
Product TypePRESCRIPTION ANIMAL DRUGItem Code (Source)NDC:70273-011
Route of AdministrationRESPIRATORY (INHALATION)
Active Ingredient/Active Moiety
Ingredient NameBasis of StrengthStrength
OXYGEN (UNII: S88TT14065) (OXYGEN - UNII:S88TT14065) OXYGEN990 mL  in 1 L
Packaging
#Item CodePackage DescriptionMarketing Start DateMarketing End Date
1NDC:70273-011-097060 L in 1 CYLINDER
2NDC:70273-011-103160 L in 1 CYLINDER
3NDC:70273-011-11690 L in 1 CYLINDER
4NDC:70273-011-12420 L in 1 CYLINDER
5NDC:70273-011-13246 L in 1 CYLINDER
6NDC:70273-011-14198 L in 1 CYLINDER
7NDC:70273-011-15164 L in 1 CYLINDER
8NDC:70273-011-16113 L in 1 CYLINDER
Marketing Information
Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
NADANADA14136506/30/1992
Labeler - A & E Mill & Welding Supply Company (004998720)
Establishment
NameAddressID/FEIBusiness Operations
A & E Mill & Welding Supply Company004998720manufacture

Revised: 12/2015
Document Id: bc89510d-955b-4405-9e81-4fd073e618aa
Set id: 5e78680a-f243-4e94-ae48-87c3c1037021
Version: 4
Effective Time: 20151201
 
A & E Mill & Welding Supply Company