ESMOLOL HYDROCHLORIDE- esmolol hydrochloride in sodium chloride injection
Amneal Pharmaceuticals LLC
----------
HIGHLIGHTS OF PRESCRIBING INFORMATION
These highlights do not include all the information needed to use ESMOLOL HYDROCHLORIDE IN SODIUM CHLORIDE INJECTION safely and effectively. See full prescribing information for ESMOLOL HYDROCHLORIDE IN SODIUM CHLORIDE INJECTION.
ESMOLOL HYDROCHLORIDE in sodium chloride injection, for intravenous use Initial U.S. Approval: 1986 RECENT MAJOR CHANGESWarnings and Precautions, Hypoglycemia (5.6) 06/2023
INDICATIONS AND USAGEEsmolol hydrochloride in sodium chloride injection is a beta adrenergic blocker indicated for the short-term treatment of: DOSAGE AND ADMINISTRATION
DOSAGE FORMS AND STRENGTHSCONTRAINDICATIONS
WARNINGS AND PRECAUTIONS
ADVERSE REACTIONSMost common adverse reactions (incidence > 10%) are symptomatic hypotension (hyperhidrosis, dizziness) and asymptomatic hypotension. (6) DRUG INTERACTIONS
See 17 for PATIENT COUNSELING INFORMATION. Revised: 4/2024 |
Esmolol hydrochloride in sodium chloride injection is indicated for the rapid control of ventricular rate in patients with atrial fibrillation or atrial flutter in perioperative, postoperative, or other emergent circumstances where short term control of ventricular rate with a short-acting agent is desirable. Esmolol hydrochloride in sodium chloride injection is also indicated in non-compensatory sinus tachycardia where, in the physician’s judgment, the rapid heart rate requires specific intervention. Esmolol hydrochloride in sodium chloride injection is intended for short-term use.
Esmolol hydrochloride in sodium chloride injection is indicated for the short-term treatment of tachycardia and hypertension that occur during induction and tracheal intubation, during surgery, on emergence from anesthesia and in the post-operative period, when in the physician’s judgment such specific intervention is considered indicated.
Use of esmolol hydrochloride in sodium chloride injection to prevent such events is not recommended.
Esmolol hydrochloride in sodium chloride injection is administered by continuous intravenous infusion with or without a loading dose. Additional loading doses and/or titration of the maintenance infusion (step-wise dosing) may be necessary based on desired ventricular response.
Table 1: Step-Wise Dosing
Step |
Action |
1 |
Optional loading dose (500 mcg per kg over 1 minute), then 50 mcg per kg per min for 4 min |
2 |
Optional loading dose if necessary, then 100 mcg per kg per min for 4 min |
3 |
Optional loading dose if necessary, then 150 mcg per kg per min for 4 min |
4 |
If necessary, increase dose to 200 mcg per kg per min |
In the absence of loading doses, continuous infusion of a single concentration of esmolol reaches pharmacokinetic and pharmacodynamic steady-state in about 30 minutes.
The effective maintenance dose for continuous and step-wise dosing is 50 mcg per kg per minute to 200 mcg per kg per minute, although doses as low as 25 mcg per kg per minute have been adequate. Dosages greater than 200 mcg per kg per minute provide little added heart rate lowering effect, and the rate of adverse reactions increases.
Maintenance infusions may be continued for up to 48 hours.
In this setting it is not always advisable to slowly titrate to a therapeutic effect. Therefore, two dosing options are presented: immediate control and gradual control.
Immediate Control
Gradual Control
Maximum Recommended Doses
After patients achieve adequate control of the heart rate and a stable clinical status, transition to alternative antiarrhythmic drugs may be accomplished.
When transitioning from esmolol hydrochloride in sodium chloride injection to alternative drugs, the physician should carefully consider the labeling instructions of the alternative drug selected and reduce the dosage of esmolol hydrochloride in sodium chloride injection as follows:
Esmolol hydrochloride in sodium chloride injection is available in a pre-mixed bag. Esmolol hydrochloride in sodium chloride injection is not compatible with Sodium Bicarbonate (5%) solution (limited stability) or furosemide (precipitation).
Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit.
Premixed Bag
Figure 1: Two-Port Intravenous Bag
Compatibility with Commonly Used Intravenous Fluids
Esmolol hydrochloride in sodium chloride injection was tested for compatibility with ten commonly used intravenous fluids at a final concentration of 10 mg esmolol hydrochloride per mL. Esmolol hydrochloride in sodium chloride injection was found to be compatible with the following solutions and was stable for at least 24 hours at controlled room temperature or under refrigeration:
All esmolol hydrochloride in sodium chloride injection dosage forms are iso-osmotic solutions of esmolol hydrochloride in sodium chloride.
Table 2: Esmolol Hydrochloride in Sodium Chloride Injection Presentations
Product Name |
Esmolol Hydrochloride in Sodium Chloride Injection |
Esmolol Hydrochloride in Sodium Chloride Injection [DOUBLE STRENGTH] |
Total Dose |
2,500 mg/250 mL |
2,000 mg/100 mL |
Esmolol Hydrochloride Concentration |
10 mg/mL |
20 mg/mL |
Packaging |
250 mL Bag |
100 mL Bag |
Esmolol hydrochloride in sodium chloride injection is contraindicated in patients with:
Hypotension can occur at any dose but is dose-related. Patients with hemodynamic compromise or on interacting medications are at particular risk. Severe reactions may include loss of consciousness, cardiac arrest, and death. For control of ventricular heart rate, maintenance doses greater than 200 mcg per kg per min are not recommended. Monitor patients closely, especially if pre-treatment blood pressure is low. In case of an unacceptable drop in blood pressure, reduce or stop esmolol hydrochloride in sodium chloride injection. Decrease of dose or termination of infusion reverses hypotension, usually within 30 minutes.
Bradycardia, including sinus pause, heart block, severe bradycardia, and cardiac arrest have occurred with the use of esmolol hydrochloride in sodium chloride injection. Patients with first-degree atrioventricular block, sinus node dysfunction, or conduction disorders may be at increased risk. Monitor heart rate and rhythm in patients receiving esmolol hydrochloride in sodium chloride injection [see Contraindications (4)].
If severe bradycardia develops, reduce or stop esmolol hydrochloride in sodium chloride injection.
Beta blockers, like esmolol hydrochloride in sodium chloride injection, can cause depression of myocardial contractility and may precipitate heart failure and cardiogenic shock. At the first sign or symptom of impending cardiac failure, stop esmolol hydrochloride in sodium chloride injection and start supportive therapy [see Overdosage (10)].
Monitor vital signs closely and titrate esmolol hydrochloride in sodium chloride injection slowly in the treatment of patients whose blood pressure is primarily driven by vasoconstriction associated with hypothermia.
Patients with reactive airways disease should, in general, not receive beta blockers. Because of its relative beta1 selectivity and titratability, titrate esmolol hydrochloride in sodium chloride injection to the lowest possible effective dose. In the event of bronchospasm, stop the infusion immediately; a beta2 stimulating agent may be administered with appropriate monitoring of ventricular rates.
Beta-blockers may prevent early warning signs of hypoglycemia, such as tachycardia, and increase the risk for severe or prolonged hypoglycemia at any time during treatment, especially in patients with diabetes mellitus or children and patients who are fasting (i.e. surgery, not eating regularly, or are vomiting). If severe hypoglycemia occurs, patients should be instructed to seek emergency treatment.
Infusion site reactions have occurred with the use of esmolol hydrochloride in sodium chloride injection. They include irritation, inflammation, and severe reactions (thrombophlebitis, necrosis and blistering), in particular when associated with extravasation [see Adverse Reactions (6)]. Avoid infusions into small veins or through a butterfly catheter.
If a local infusion site reaction develops, use an alternative infusion site and avoid extravasation.
Beta blockers may exacerbate anginal attacks in patients with Prinzmetal’s angina because of unopposed alpha receptor–mediated coronary artery vasoconstriction. Do not use nonselective beta blockers.
If esmolol hydrochloride in sodium chloride injection is used in the setting of pheochromocytoma, give it in combination with an alpha-blocker, and only after the alpha-blocker has been initiated. Administration of beta-blockers alone in the setting of pheochromocytoma has been associated with a paradoxical increase in blood pressure from the attenuation of beta-mediated vasodilation in skeletal muscle.
In hypovolemic patients, esmolol hydrochloride in sodium chloride injection can attenuate reflex tachycardia and increase the risk of hypotension.
In patients with peripheral circulatory disorders (including Raynaud’s disease or syndrome, and peripheral occlusive vascular disease), esmolol hydrochloride in sodium chloride injection may aggravate peripheral circulatory disorders.
Severe exacerbations of angina, myocardial infarction, and ventricular arrhythmias have been reported in patients with coronary artery disease upon abrupt discontinuation of beta blocker therapy. Observe patients for signs of myocardial ischemia when discontinuing esmolol hydrochloride in sodium chloride injection.
Heart rate increases moderately above pre-treatment levels 30 minutes after esmolol hydrochloride in sodium chloride injection discontinuation.
Beta blockers, including esmolol hydrochloride in sodium chloride injection, have been associated with increases in serum potassium levels and hyperkalemia. The risk is increased in patients with risk factors such as renal impairment. Intravenous administration of beta blockers has been reported to cause potentially life-threatening hyperkalemia in hemodialysis patients. Monitor serum electrolytes during therapy with esmolol hydrochloride in sodium chloride injection.
Beta blockers, including esmolol hydrochloride in sodium chloride injection, have been reported to cause hyperkalemic renal tubular acidosis. Acidosis in general may be associated with reduced cardiac contractility.
Beta-adrenergic blockade may mask certain clinical signs (e.g., tachycardia) of hyperthyroidism. Abrupt withdrawal of beta blockade might precipitate a thyroid storm; therefore, monitor patients for signs of thyrotoxicosis when withdrawing beta blocking therapy.
When using beta blockers, patients at risk of anaphylactic reactions may be more reactive to allergen exposure (accidental, diagnostic, or therapeutic).
Patients using beta blockers may be unresponsive to the usual doses of epinephrine used to treat anaphylactic or anaphylactoid reactions [see Drug Interactions (7)].
Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of a drug cannot be directly compared to rates in the clinical trials of another drug and may not reflect the rates observed in clinical practice.
The following adverse reaction rates are based on use of esmolol hydrochloride in sodium chloride injection in clinical trials involving 369 patients with supraventricular tachycardia and over 600 intraoperative and postoperative patients enrolled in clinical trials. Most adverse effects observed in controlled clinical trial settings have been mild and transient. The most important and common adverse effect has been hypotension [see Warnings and Precautions (5.1)]. Deaths have been reported in post-marketing experience occurring during complex clinical states where esmolol hydrochloride in sodium chloride injection was presumably being used simply to control ventricular rate [see Warnings and Precautions (5.5)].
Table 3: Clinical Trial Adverse Reactions (Frequency ≥ 3%)
System Organ Class (SOC) | Preferred MedDRA Term | Frequency |
---|---|---|
VASCULAR DISORDERS |
Hypotension* Asymptomatic hypotension Symptomatic hypotension (hyperhidrosis, dizziness) |
25% 12% |
GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS |
Infusion site reactions (inflammation and induration) |
8% |
GASTROINTESTINAL DISORDERS |
Nausea |
7% |
NERVOUS SYSTEM DISORDERS |
Dizziness |
3% |
Somnolence |
3% |
|
*Hypotension resolved during esmolol hydrochloride in sodium chloride injection infusion in 63% of patients. In 80% of the remaining patients, hypotension resolved within 30 minutes following discontinuation of infusion. |
Clinical Trial Adverse Reactions (Frequency < 3%)
Psychiatric Disorders
Nervous System Disorders
Vascular Disorders
Gastrointestinal Disorders
Renal and Urinary Disorders
In addition to the adverse reactions reported in clinical trials, the following adverse reactions have been reported in the post-marketing experience. Because these reactions are reported voluntarily from a population of uncertain size, it is not always possible to estimate reliably their frequency or to establish a causal relationship to drug exposure.
Cardiac Disorders
Skin and Subcutaneous Tissue Disorders
Concomitant use of esmolol hydrochloride in sodium chloride injection with other drugs that can lower blood pressure, reduce myocardial contractility, or interfere with sinus node function or electrical impulse propagation in the myocardium can exaggerate esmolol hydrochloride in sodium chloride injection’s effects on blood pressure, contractility and impulse propagation. Severe interactions with such drugs can result in, for example, severe hypotension, cardiac failure, severe bradycardia, sinus pause, sinoatrial block, atrioventricular block and/or cardiac arrest. In addition, with some drugs, beta blockade may precipitate increased withdrawal effects (see clonidine, guanfacine and moxonidine below). Esmolol hydrochloride in sodium chloride injection should therefore be used only after careful individual assessment of the risks and expected benefits in patients receiving drugs that can cause these types of pharmacodynamic interactions, including but not limited to:
Esmolol hydrochloride has been shown to produce increased fetal resorptions with minimal maternal toxicity in rabbits when given in doses approximately 8 times the maximum human maintenance dose (300 mcg/kg/min). There are no adequate and well-controlled studies in pregnant women. Esmolol hydrochloride in sodium chloride injection should be used during pregnancy only if the potential benefit justifies the potential risk to the fetus.
Teratogenicity studies in rats at intravenous dosages of esmolol hydrochloride up to 3,000 mcg/kg/min (10 times the maximum human maintenance dosage) for 30 minutes daily produced no evidence of maternal toxicity, embryotoxicity or teratogenicity, while a dosage of 10,000 mcg/kg/min produced maternal toxicity and lethality. In rabbits, intravenous dosages up to 1,000 mcg/kg/min for 30 minutes daily produced no evidence of maternal toxicity, embryotoxicity or teratogenicity, while 2,500 mcg/kg/min produced minimal maternal toxicity and increased fetal resorptions.
Although there are no adequate and well-controlled studies in pregnant women, use of esmolol in the last trimester of pregnancy or during labor or delivery has been reported to cause fetal bradycardia, which continued after termination of drug infusion. Esmolol hydrochloride in sodium chloride injection should be used during pregnancy only if the potential benefit justifies the potential risk to the fetus.
It is not known whether this drug is excreted in human milk. Because many drugs are excreted in human milk and because of the potential for serious adverse reactions in nursing infants from esmolol hydrochloride in sodium chloride injection, a decision should be made whether to discontinue nursing or to discontinue the drug, taking into account the importance of the drug to the mother.
The safety and effectiveness of esmolol hydrochloride in sodium chloride injection in pediatric patients have not been established.
Clinical studies of esmolol hydrochloride in sodium chloride injection did not include sufficient numbers of subjects aged 65 and over to determine whether they responded differently from younger subjects. Other reported clinical experience has not identified differences in responses between the elderly and younger patients. In general, dose selection for an elderly patient should usually start at the low end of the dosing range, reflecting greater frequency of decreased renal or cardiac function and of concomitant disease or other drug therapy.
No special precautions are necessary in patients with hepatic impairment because esmolol hydrochloride in sodium chloride injection is metabolized by red-blood cell esterases [see Clinical Pharmacology (12)].
No dosage adjustment is required for esmolol in patients with renal impairment receiving a maintenance infusion of esmolol 150 mcg/kg for 4 hours. There is no information on the tolerability of maintenance infusions of esmolol using rates in excess of 150 mcg/kg or maintained longer than 4 hours [see Clinical Pharmacology (12)].
Overdoses of esmolol hydrochloride in sodium chloride injection can cause cardiac and central nervous system effects. These effects may precipitate severe signs, symptoms, sequelae, and complications (for example, severe cardiac and respiratory failure, including shock and coma), and may be fatal. Continuous monitoring of the patient is required.
Because of its approximately 9-minute elimination half-life, the first step in the management of toxicity should be to discontinue the esmolol hydrochloride infusion. Then, based on the observed clinical effects, consider the following general measures.
Bradycardia
Consider intravenous administration of atropine or another anticholinergic drug or cardiac pacing.
Cardiac Failure
Consider intravenous administration of a diuretic or digitalis glycoside. In shock resulting from inadequate cardiac contractility, consider intravenous administration of dopamine, dobutamine, isoproterenol, or inamrinone. Glucagon has been reported to be useful.
Symptomatic hypotension
Consider intravenous administration of fluids or vasopressor agents such as dopamine or norepinephrine.
Bronchospasm
Consider intravenous administration of a beta2 stimulating agent or a theophylline derivative.
Massive accidental overdoses of esmolol hydrochloride in sodium chloride injection have resulted from dilution errors. Use of esmolol hydrochloride in sodium chloride injection and esmolol hydrochloride in sodium chloride injection [DOUBLE STRENGTH] may reduce the potential for dilution errors. Some of these overdoses have been fatal while others resulted in permanent disability. Bolus doses in the range of 625 mg to 2.5 g (12.5 mg/kg to 50 mg/kg) have been fatal. Patients have recovered completely from overdoses as high as 1.75 g given over one minute or doses of 7.5 g given over one hour for cardiovascular surgery. The patients who survived appear to be those whose circulation could be supported until the effects of esmolol hydrochloride in sodium chloride injection resolved.
Esmolol hydrochloride in sodium chloride injection is a beta adrenergic receptor blocker with a very short duration of action (elimination half-life is approximately 9 minutes).
Esmolol hydrochloride, USP is:
Esmolol hydrochloride in sodium chloride injection is clear, colorless to light yellow, sterile, nonpyrogenic, iso-osmotic solution. The formulations for esmolol hydrochloride in sodium chloride injection, 2,500 mg/250 mL (10 mg/mL) and esmolol hydrochloride in sodium chloride injection [DOUBLE STRENGTH], 2,000 mg/100 mL (20 mg/mL) are described in the table below:
Table 4: Esmolol Hydrochloride in Sodium Chloride Injection Formulations
|
Esmolol Hydrochloride in Sodium Chloride Injection |
Esmolol Hydrochloride in Sodium Chloride Injection [DOUBLE STRENGTH] |
Esmolol Hydrochloride, USP |
10 mg/mL |
20 mg/mL |
Sodium Chloride, USP |
5.9 mg/mL |
4.1 mg/mL |
Water for Injection, USP |
Q.S. to volume of 250 mL |
Q.S. to volume of 100 mL |
Sodium Acetate Trihydrate, USP |
2.8 mg/mL |
2.8 mg/mL |
Glacial Acetic Acid, USP |
0.546 mg/mL |
0.546 mg/mL |
Sodium Hydroxide |
Q.S. to adjust pH to 5.0 (4.5 to 5.5) |
|
Hydrochloric Acid |
Q.S. to adjust pH to 5.0 (4.5 to 5.5) |
|
Q.S. = Quantity sufficient |
The calculated osmolarity of esmolol hydrochloride in sodium chloride injection, 2,500 mg/250 mL (10 mg/mL) and esmolol hydrochloride in sodium chloride injection [DOUBLE STRENGTH] 2,000 mg/100 mL (20 mg/mL) is 312 mOsmol/L.
The 250 mL and 100 mL Magiflex bags are non-latex, non-PVC with dual PP ports. Solutions in contact with the plastic container leach out certain chemical compounds from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials.
Esmolol hydrochloride in sodium chloride injection is a beta1-selective (cardioselective) adrenergic receptor blocking agent with rapid onset, a very short duration of action, and no significant intrinsic sympathomimetic or membrane stabilizing activity at therapeutic dosages. Its elimination half-life after intravenous infusion is approximately 9 minutes. Esmolol hydrochloride in sodium chloride injection inhibits the beta1 receptors located chiefly in cardiac muscle, but this preferential effect is not absolute and at higher doses it begins to inhibit beta2 receptors located chiefly in the bronchial and vascular musculature.
Clinical pharmacology studies in normal volunteers have confirmed the beta blocking activity of esmolol hydrochloride in sodium chloride injection, showing reduction in heart rate at rest and during exercise, and attenuation of isoproterenol-induced increases in heart rate. Blood levels of esmolol hydrochloride in sodium chloride injection have been shown to correlate with extent of beta blockade. After termination of infusion, substantial recovery from beta blockade is observed in 10 to 20 minutes. The acid metabolite of esmolol exhibits negligible pharmacological activity.
In human electrophysiology studies, esmolol hydrochloride in sodium chloride injection produced effects typical of a beta blocker: a decrease in the heart rate, increase in sinus cycle length, prolongation of the sinus node recovery time, prolongation of the AH interval during normal sinus rhythm and during atrial pacing, and an increase in antegrade Wenckebach cycle length.
In patients undergoing radionuclide angiography, esmolol hydrochloride in sodium chloride injection, at dosages of 200 mcg/kg/min, produced reductions in heart rate, systolic blood pressure, rate pressure product, left and right ventricular ejection fraction and cardiac index at rest, which were similar in magnitude to those produced by intravenous propranolol (4 mg). During exercise, esmolol hydrochloride in sodium chloride injection produced reductions in heart rate, rate pressure product and cardiac index which were also similar to those produced by propranolol, but esmolol hydrochloride in sodium chloride injection produced a significantly larger fall in systolic blood pressure. In patients undergoing cardiac catheterization, the maximum therapeutic dose of 300 mcg/kg/min of esmolol hydrochloride in sodium chloride injection produced similar effects and, in addition, there were small, clinically insignificant increases in the left ventricular end diastolic pressure and pulmonary capillary wedge pressure. At 30 minutes after the discontinuation of esmolol hydrochloride infusion, all of the hemodynamic parameters had returned to pre-treatment levels.
The relative cardioselectivity of esmolol hydrochloride in sodium chloride injection was demonstrated in 10 mildly asthmatic patients. Infusions of esmolol hydrochloride in sodium chloride injection 100 mcg/kg/min, 200 mcg/kg/min and 300 mcg/kg/min produced no significant increases in specific airway resistance compared to placebo. At 300 mcg/kg/min, esmolol hydrochloride in sodium chloride injection produced slightly enhanced bronchomotor sensitivity to dry air stimulus. These effects were not clinically significant, and esmolol hydrochloride in sodium chloride injection was well tolerated by all patients. Six of the patients also received intravenous propranolol, and at a dosage of 1 mg, two experienced significant, symptomatic bronchospasm requiring bronchodilator treatment. One other propranolol-treated patient also experienced dry air-induced bronchospasm. No adverse pulmonary effects were observed in patients with COPD who received therapeutic dosages of esmolol hydrochloride in sodium chloride injection for treatment of supraventricular tachycardia (51 patients) or in perioperative settings (32 patients).
Esmolol is rapidly metabolized by hydrolysis of the ester linkage, chiefly by the esterases in the cytosol of red blood cells and not by plasma cholinesterases or red cell membrane acetylcholinesterase. Total body clearance in man was found to be about 20 L/kg/hr, which is greater than cardiac output; thus the metabolism of esmolol is not limited by the rate of blood flow to metabolizing tissues such as the liver or affected by hepatic or renal blood flow. Esmolol has a rapid distribution half-life of about 2 minutes and an elimination half-life of about 9 minutes.
Using an appropriate loading dose, steady-state blood levels of esmolol hydrochloride in sodium chloride injection for dosages from 50 mcg/kg/min to 300 mcg/kg/min are obtained within five minutes. Steady-state is reached in about 30 minutes without the loading dose. Steady-state blood levels of esmolol increase linearly over this dosage range and elimination kinetics are dose-independent over this range. Steady-state blood levels are maintained during infusion but decrease rapidly after termination of the infusion. Because of its short half-life, blood levels of esmolol can be rapidly altered by increasing or decreasing the infusion rate and rapidly eliminated by discontinuing the infusion.
Consistent with the high rate of blood-based metabolism of esmolol, less than 2% of the drug is excreted unchanged in the urine. Within 24 hours of the end of infusion, the acid metabolite of esmolol in urine accounts for approximately 73% to 88% of the dosage.
Metabolism of esmolol results in the formation of the corresponding free acid and methanol. The acid metabolite has been shown in animals to have negligible activity and in normal volunteers its blood levels do not correspond to the level of beta blockade. The acid metabolite has an elimination half-life of about 3.7 hours and is excreted in the urine with a clearance approximately equivalent to the glomerular filtration rate. After a 4 hours maintenance infusion of 150 mcg/kg, the plasma concentrations of esmolol are similar in subjects with normal renal function and in patients with ESRD on dialysis. The half-life of the acid metabolite of esmolol hydrochloride in sodium chloride injection, which is primarily excreted unchanged by the kidney, is increased about 12-fold to 48 hours in patients with ESRD. The peak concentrations of the acid metabolite are doubled in ESRD.
Methanol blood levels, monitored in subjects receiving esmolol hydrochloride in sodium chloride injection for up to 6 hours at 300 mcg/kg/min and 24 hours at 150 mcg/kg/min, approximated endogenous levels and were less than 2% of levels usually associated with methanol toxicity.
Esmolol hydrochloride in sodium chloride injection has been shown to be 55% bound to human plasma protein, while the acid metabolite is only 10% bound.
Because of its short term usage no carcinogenicity, mutagenicity, or reproductive performance studies have been conducted with esmolol.
Supraventricular Tachycardia
In two multicenter, randomized, double-blind, controlled comparisons of esmolol hydrochloride in sodium chloride injection with placebo and propranolol, maintenance doses of 50 mcg/kg/min to 300 mcg/kg/min of esmolol hydrochloride in sodium chloride injection were found to be more effective than placebo and about as effective as propranolol, 3 mg to 6 mg given by bolus injections, in the treatment of supraventricular tachycardia, principally atrial fibrillation and atrial flutter. The majority of these patients developed their arrhythmias postoperatively. About 60% to 70% of the patients treated with esmolol hydrochloride in sodium chloride injection developed either a 20% reduction in heart rate, a decrease in heart rate to less than 100 bpm, or, rarely, conversion to normal sinus rhythm and about 95% of these patients did so at a dosage of 200 mcg/kg/min or less. The average effective dosage of esmolol hydrochloride in sodium chloride injection was approximately 100 mcg/kg/min in the two studies. Other multicenter baseline-controlled studies gave similar results. In the comparison with propranolol, about 50% of patients in both the esmolol hydrochloride in sodium chloride injection and propranolol groups were on concomitant digoxin. Response rates were slightly higher with both beta blockers in the digoxin-treated patients.
In all studies significant decreases of blood pressure occurred in 20% to 50% of patients, identified either as adverse reaction reports by investigators, or by observation of systolic pressure less than 90 mmHg or diastolic pressure less than 50 mmHg. The hypotension was symptomatic (mainly hyperhidrosis or dizziness) in about 12% of patients, and therapy was discontinued in about 11% of patients, about half of whom were symptomatic. Hypotension was more common with esmolol hydrochloride in sodium chloride injection (53%) than with propranolol (17%). The hypotension was rapidly reversible with decreased infusion rate or after discontinuation of therapy with esmolol hydrochloride in sodium chloride injection. For both esmolol hydrochloride in sodium chloride injection and propranolol, hypotension was reported less frequently in patients receiving concomitant digoxin.
Esmolol Hydrochloride in Sodium Chloride Injection, 2,500 mg/250 mL (10 mg/mL) is supplied as clear, colorless to light yellow color solution filled in intravenous bags. Each mL contains 10 mg of esmolol hydrochloride, USP. They are available as follows:
Strength |
Each |
Unit of Sale |
2,500 mg/250 mL (10 mg/mL) |
NDC 70121-1716-1 1 Single-dose Intravenous Bag in an Overwrap |
NDC 70121-1716-7 Unit of 10 |
NDC 70121-1716-3 Unit of 12 |
Esmolol Hydrochloride in Sodium Chloride Injection [DOUBLE STRENGTH], 2,000 mg/100 mL (20 mg/mL) is supplied as clear, colorless to light yellow color solution filled in intravenous bags. Each mL contains 20 mg of esmolol hydrochloride, USP. They are available as follows:
Strength |
Each |
Unit of Sale |
2,000 mg/100 mL (20 mg/mL) |
NDC 70121-1717-1 1 Single-dose Intravenous Bag in an Overwrap |
NDC 70121-1717-7 Unit of 10 |
NDC 70121-1717-3 Unit of 12 |
Store at 20° to 25˚C (68° to 77˚F); excursions permitted between 15˚ to 30˚C (59˚ to 86˚F) [see USP Controlled Room Temperature]. Protect from freezing. Avoid excessive heat.
Visually inspect the container. If the administration port protector is damaged, detached, or not present, discard container as solution path sterility may be impaired.
Each intravenous bag contains no preservative. Once drug has been withdrawn from ready-to-use bag, the bag should be used within 24 hours, with any unused portion discarded.
Do not use plastic containers in series connections. Such use could result in an embolism due to residual air being drawn from the primary container before administration of the fluid from the secondary container is completed.
Do not remove unit from overwrap until ready to use. Do not use if overwrap has been previously opened or damaged. The overwrap is a moisture barrier. The inner bag maintains sterility of the solution. Tear overwrap at notch and remove premixed bag. Some opacity of the plastic due to moisture absorption during the sterilization process may be observed. This is normal and does not affect the solution quality or safety. The opacity will diminish gradually.
Check for minute leaks by squeezing the inner bag firmly. If leaks are found, discard solution, as sterility may be impaired. Do not use unless the solution is clear (colorless to light yellow) and the seal is intact.
Preparation for intravenous administration:
Physicians should inform patients of the risks associated with esmolol hydrochloride in sodium chloride injection:
For additional information go to www.amneal.com or call 1-877-835-5472.
Manufactured by:
Amneal Pharmaceuticals Pvt. Ltd.
Mehsana 382165, INDIA
Distributed by:
Amneal Pharmaceuticals LLC
Bridgewater, NJ 08807
Rev. 04-2024-05
NDC 70121-1716-1
Esmolol Hydrochloride in Sodium Chloride Injection, 2,500 mg/250 mL (10 mg/mL)
Rx only
Intravenous Bag Label
Amneal Pharmaceuticals LLC
NDC 70121-1716-1
Esmolol Hydrochloride in Sodium Chloride Injection, 2,500 mg/250 mL (10 mg/mL)
Rx only
Pouch Label
Amneal Pharmaceuticals LLC
Esmolol Hydrochloride in Sodium Chloride Injection, 2,500 mg/250 mL (10 mg/mL)
Sticker Label
Rx only
Amneal Pharmaceuticals LLC
NDC 70121-1716-7
Esmolol Hydrochloride in Sodium Chloride Injection, 2,500 mg/250 mL (10 mg/mL)
Rx only
10 x 250 mL mL Carton Label
Amneal Pharmaceuticals LLC
NDC 70121-1716-3
Esmolol Hydrochloride in Sodium Chloride Injection, 2,500 mg/250 mL (10 mg/mL)
Rx only
12 x 250 mL mL Carton Label
Amneal Pharmaceuticals LLC
NDC 70121-1717-1
Esmolol Hydrochloride in Sodium Chloride Injection [DOUBLE STRENGTH], 2,000 mg/100 mL (20 mg/mL)
Rx only
Intravenous Bag Label
Amneal Pharmaceuticals LLC
NDC 70121-1717-1
Esmolol Hydrochloride in Sodium Chloride Injection [DOUBLE STRENGTH], 2,000 mg/100 mL (20 mg/mL)
Rx only
Pouch Label
Amneal Pharmaceuticals LLC
Esmolol Hydrochloride in Sodium Chloride Injection [DOUBLE STRENGTH], 2,000 mg/100 mL (20 mg/mL)
Sticker Label
Rx only
Amneal Pharmaceuticals LLC
NDC 70121-1717-7
Esmolol Hydrochloride in Sodium Chloride Injection [DOUBLE STRENGTH], 2,000 mg/100 mL (20 mg/mL)
Rx only
10 x 100 mL Carton Label
Amneal Pharmaceuticals LLC
NDC 70121-1717-3
Esmolol Hydrochloride in Sodium Chloride Injection [DOUBLE STRENGTH], 2,000 mg/100 mL (20 mg/mL)
Rx only
12 x 100 mL Carton Label
Amneal Pharmaceuticals LLC
ESMOLOL HYDROCHLORIDE
esmolol hydrochloride in sodium chloride injection |
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
ESMOLOL HYDROCHLORIDE
esmolol hydrochloride in sodium chloride injection |
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
Labeler - Amneal Pharmaceuticals LLC (827748190) |
Establishment | |||
Name | Address | ID/FEI | Business Operations |
---|---|---|---|
Amneal Pharmaceuticals Private Limited | 854377396 | analysis(70121-1716, 70121-1717) , label(70121-1716, 70121-1717) , manufacture(70121-1716, 70121-1717) , pack(70121-1716, 70121-1717) , sterilize(70121-1716, 70121-1717) |