CARBON DIOXIDE- carbon dioxide gas 
MITCHELL WELDING SUPPLY DBA Meritus Texas

----------

Carbon Dioxide

CARBON DIOXIDE USP

UN1013

Rx Only. WARNING: Administration of Carbon Dioxide may be hazardous or contraindicated. For use only by or under the supervision of a licensed practitioner who is experienced in the use and administration of Carbon Dioxide and is familiar with the indications, effects, dosages, methods, and frequency, and duration of administration, and with the hazards, contraindications and side effects, and the precautions to be taken. WARNING: CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED. MAY DISPLACE OXYGEN AND CAUSE RAPID SUFFOCATION. MAY CAUSE FROSTBITE. MAY INCREASE RESPIRATION AND HEART RATE. Do not handle until all safety precautions have been read and understood. Avoid breathing gas. Do not get in eyes, on skin, or on clothing. Use and store only outdoors or in a well-ventilated place. Wear protective gloves, protective clothing, and either eye or face protection. Protect from sunlight when ambient temperature exceeds 52 C (125 F). Use a back flow preventive device in the piping. Close after each use and when empty. Use only with equipment rated for cylinder pressure. Never put cylinders into unventilated areas of passenger vehicles. Do not open valve until connected to equipment prepared for use. Read and follow the Safety Data Sheet (SDS0 before use. FIRST AID: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get medical advice/attention. IF ON SKIN: Thaw frosted parts with lukewarm water. Do not rub affected area. Get immediate medical advice/attention.

CAS: 124-38-9 DO NOT REMOVE THIS PRODUCT LABEL.

3539 Highway 271

Tyler, TX 75708

903-593-7343

www.mitchellwelding.com

MWS

Mitchell Welding Supply

CONTENTS: LTRS: CU.FT. carbon dioxide one

CARBON DIOXIDE

REFRIGERATED LIQUID USP

UN2187

ALWAYS KEEP CONTAINER IN UPRIGHT POSITION.

WARNING

Rx ONLY. Administration of Carbon Dioxide may be hazardous or contraindicated. For use only by or under the supervision of a licensed practitioner who is experienced in the use and administration of Carbon Dioxide and is familiar with the indications, effects, dosages, methods, and frequency, and duration of administration, and with the hazards, contraindications and side effects, and the precautions to be taken. WARNING: CONTAINS REFRIGERATED GAS; MAY CAUSE CRYOGENIC BURNS OR INJURY. MAY DISPLACE OXYGEN AND CAUSE RAPID SUFFOCATION. MAY INCREASE RESPIRATION AND HEART RATE. Do not handle until all safety precautions have been read and understood. Use and store only outdoors or in a well-ventilated place. Wear cold insulating gloves, face shield, and eye protection. Use a back flow preventive device in the piping. Close valve after each use and when empty. Use only with equipment rated for cylinder pressure. Never put cylinders into unventilated areas of passenger vehicles. Do not open valve until connected to equipment prepared for use. Use only equipment of compatible materials of construction. DO NOT change or force fit connections.

READ AND FOLLOW THE SAFETY DATA SHEET (SDS) BEFORE USE.

CAS: 124-38-9

FIRST AID

IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get medical advice/attention.

IF ON SKIN: Thaw frosted parts with lukewarm water. Do not rub affected area. Get immediate medical advice/attention.

3539 Highway 271

Tyler, TX 75708

903-593-7343

MWS

Mitchell Welding Supply

www.mitchellwelding.com carbon dioxide two

CARBON DIOXIDE USP

UN1013

WARNING: Rx ONLY. Administration of Carbon Dioxide may be hazardous or contraindicated. For use only by or under the supervision of a licensed practitioner who is experienced in the use and administration of Carbon Dioxide and is familiar with the indications, effects, dosages, methods, and frequency, and duration of administration, and with the hazards, contraindications and side effects, and the precautions to be taken.

WARNING: CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED. MAY DISPLACE OXYGEN AND CAUSE RAPID SUFFOCATION. MAY CAUSE FROSTBITE. MAY INCREASE RESPIRATION AND HEART RATE. Do not handle until all safety precautions have been read and understood. Avoid breathing gas. Do not get in eyes, on skin, or on clothing. Use and store only outdoors or in a well-ventilated place. Wear protective gloves, protective clothing, and either eye or face protection. Protect from sunlight when ambient temperature exceeds 52 C (125 F). Use a back flow preventive device in the piping. Close valve after each use and when empty. Use only with equipment rated for cylinder pressure. Never put cylinders into unventilated areas of passenger vehicles. Do not open valve until connected to equipment prepared for use. Read and follow the Safety Data Sheet (SDS) before use. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get medical advice/attention. IF ON SKIN: Thaw frosted parts with lukewarm water. Do not rub affected area. Get immediate medical advice/attention.

CAS: 124-38-9

DO NOT REMOVE THIS PRODUCT LABEL.

3539 Highway 271

Tyler, TX 75708

903-593-7343

MWS

Mitchell Welding Supply

www.mitchellwelding.com carbon dioxide three

CARBON DIOXIDE, REFRIGERATED LIQUID USP

UN2187

MWS

Mitchell Welding Supply

3539 Highway 271

Tyler, TX 75708

903-593-7343

www.mitchellwelding.com

ALWAYS KEEP CONTAINER IN UPRIGHT POSITION

WARNING:

USP Rx Only. Administration of Carbon Dioxide may be hazardous or contraindicated. For use only by or under the supervision of a licensed practitioner who is experienced in the use and administration of Carbon Dioxide and is familiar with the indications, effects, dosages, methods, and frequency, and duration of administration, and with the hazards, contraindications and side effects, and the precautions to be taken.

WARNING: CONTAINS REFRIGERATED GAS; MAY CAUSE CRYOGENIC BURNS OR INJURY. MAY DISPLACE OXYGEN AND CAUSE RAPID SUFFOCATION. MAY INCREASE RESPIRATION AND HEART RATE. Do not handle until all safety precautions have been read and understood. Use and store only outdoors or in a well-ventilated place. Wear cold insulating gloves, face shield, and eye protection. Use a back flow preventive device in the piping. Close valve after each use and when empty. Use only with equipment rated for cylinder pressure. Never put cylinders into unventilated areas of passenger vehicles. Do not open valve until connected to equipment prepared for use. Use only equipment of compatible materials of construction. DO NOT change or force fit connections. Read and follow the Safety Data Sheet (SDS) before use.

FIRST AID IF INHALED: Remove person to fresh air and keep comfortable for breathing. Get medical advice/attention.

IF ON SKIN: Thaw frosted parts with lukewarm water. Do not rub affected area. Get immediate medical advice/attention.

DO NOT REMOVE THIS PRODUCT LABEL.

CAS: 124-38-9 carbon dioxide 2025

CARBON DIOXIDE 
carbon dioxide gas
Product Information
Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:72276-004
Route of AdministrationRESPIRATORY (INHALATION)
Active Ingredient/Active Moiety
Ingredient NameBasis of StrengthStrength
CARBON DIOXIDE (UNII: 142M471B3J) (CARBON DIOXIDE - UNII:142M471B3J) CARBON DIOXIDE990 mL  in 1 L
Packaging
#Item CodePackage DescriptionMarketing Start DateMarketing End Date
1NDC:72276-004-0116055 L in 1 CYLINDER; Type 0: Not a Combination Product05/13/2025
2NDC:72276-004-0218183 L in 1 CYLINDER; Type 0: Not a Combination Product05/13/2025
3NDC:72276-004-031745 L in 1 CYLINDER; Type 0: Not a Combination Product05/13/2025
4NDC:72276-004-0414169 L in 1 CYLINDER; Type 0: Not a Combination Product05/13/2025
5NDC:72276-004-0518609 L in 1 CYLINDER; Type 0: Not a Combination Product05/13/2025
Marketing Information
Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
NDANDA22046105/13/2025
Labeler - MITCHELL WELDING SUPPLY DBA Meritus Texas (047833462)
Establishment
NameAddressID/FEIBusiness Operations
MITCHELL WELDING SUPPLY DBA Meritus Texas047833462manufacture(72276-004)
Establishment
NameAddressID/FEIBusiness Operations
Mitchell Welding Supply DBA Meritus Texas118920889manufacture(72276-004)

Revised: 3/2026
Document Id: 4dc96547-35e8-4d89-e063-6294a90a5ee9
Set id: 35061f51-65ed-74de-e063-6294a90abb1f
Version: 3
Effective Time: 20260324
 
MITCHELL WELDING SUPPLY DBA Meritus Texas