Label: AMPICILLIN- ampicillin sodium injection, powder, for solution

  • NDC Code(s): 10515-142-00
  • Packager: GC Hanford Manufacturing Company
  • DEA Schedule: None
  • Marketing Status: Abbreviated New Drug Application

Drug Label Information

Updated December 12, 2019

If you are a consumer or patient please visit this version.


    To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria.


    Ampicillin for Injection, USP, the monosodium salt of [2S-[2α, 5α, 6β(S*)]]-6-[(aminophenylacetyl)amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylic acid, is a synthetic penicillin for intravenous use. The pharmacy bulk package contains sterile ampicillin sodium equivalent to 10 grams ampicillin. It is an antibacterial agent with a broad spectrum of bactericidal activity against both penicillin-susceptible Gram-positive organisms and many common Gram-negative pathogens. It has the following structural formula:

    Ampicillin Sodiu Structural Formula

    The molecular formula is C16H18N3NaO4S, and the molecular weight is 371.39. The pH range of the reconstituted solution is 8 to 10. Ampicillin for Injection, USP contains 2.9 milliequivalents of sodium per 1 gram of drug.

    Ampicillin for Injection, USP is supplied in vials equivalent to 10 g of ampicillin. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package).


    Ampicillin for Injection, USP diffuses readily into most body tissues and fluids. However, penetration into the cerebrospinal fluid and brain occurs only when the meninges are inflamed. Ampicillin is excreted largely unchanged in the urine and its excretion can be delayed by concurrent administration of probenecid. The active form appears in the bile in higher concentrations than those found in serum. Ampicillin is the least serum-bound of all the penicillins, averaging about 20% compared to approximately 60 to 90% for other penicillins. Ampicillin for Injection, USP is well tolerated by most patients and has been given in doses of 2 grams daily for many weeks without adverse reactions.

    Microbiology: While in vitro studies have demonstrated the susceptibility of most strains of the following organisms, clinical efficacy for infections other than those included in the INDICATIONS AND USAGE section has not been demonstrated.

    The following bacteria have been shown in in vitro studies to be susceptible to Ampicillin for Injection, USP:

    GRAM-POSITIVE ORGANISMS: Hemolytic and nonhemolytic streptococci, D. pneumoniae, non penicillinase-producing staphylococci, Clostridia spp., B. anthracis,Listeria monocytogenes and most strains of enterococci.

    GRAM-NEGATIVE ORGANISMS: H. influenzae, N. gonorrhoeae, N. meningitidis, Proteus mirabilis, and many strains of Salmonella, Shigella, and E. coli.

    Ampicillin does not resist destruction by penicillinase.

    Susceptibility Tests: Ampicillin Susceptibility Test Discs, 10 mcg, should be used to estimate the in vitro susceptibility of bacteria to Ampicillin for Injection, USP.


    To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ampicillin for Injection, USP and other antibacterial drugs, Ampicillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.

    Ampicillin for Injection, USP is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the following conditions:

    Respiratory Tract Infections caused by S. pneumoniae (formerly D. pneumoniae), Staphylococcus aureus (penicillinase and non penicillinase-producing), H. influenzae and Group A beta-hemolytic streptococci.

    Bacterial Meningitis caused by E. coli, Group B Streptococci, and other Gram-negative bacteria (Listeria monocytogenes, N. meningitidis). The addition of an aminoglycoside with ampicillin may increase its effectiveness against Gram-negative bacteria.

    Septicemia and Endocarditis caused by susceptible Gram-positive organisms including Streptococcus sp., penicillin G-susceptible staphylococci and enterococci. Gram-negative sepsis caused by E. coli, Proteus mirabilis and Salmonella sp. respond to ampicillin. Endocarditis due to enterococcal strains usually respond to intravenous therapy. The addition of an aminoglycoside may enhance the effectiveness of ampicillin when treating streptococcal endocarditis.

    Urinary Tract Infections caused by sensitive strains of E. coli and Proteus mirabilis.

    Gastrointestinal Infections caused by Salmonella typhosa (typhoid fever), other Salmonella sp. and Shigella sp. (dysentery) usually respond to oral or intravenous therapy.

    Bacteriology studies to determine the causative organisms and their susceptibility to ampicillin should be performed. Therapy may be instituted prior to obtaining results of susceptibility testing.

    It is advisable to reserve the parenteral form of this drug for moderately severe and severe infections and for patients who are unable to take the oral forms. A change to oral ampicillin may be made as soon as appropriate.

    Indicated surgical procedures should be performed.


    A history of a previous hypersensitivity reaction to any of the penicillins is a contraindication.


    Serious and occasionally fatal hypersensitivity (anaphylactoid) reactions have been reported in patients on penicillin therapy. Although anaphylaxis is more frequent following parenteral therapy, it has occurred in patients on oral penicillins. These reactions are more apt to occur in individuals with a history of penicillin hypersensitivity and/or a history of sensitivity to multiple allergens.

    There have been well-documented reports of individuals with a history of penicillin hypersensitivity reactions who have experienced severe hypersensitivity reactions when treated with a cephalosporin. Before initiating therapy with a penicillin, careful inquiry should be made concerning previous hypersensitivity reactions to penicillins, cephalosporins, and other allergens. If an allergic reaction occurs, the drug should be discontinued and appropriate therapy instituted.


    Clostridium difficile associated diarrhea (CDAD) has been reported with use of nearly all antibacterial agents, including ampicillin, and may range in severity from mild diarrhea to fatal colitis. Treatment with antibacterial agents alters the normal flora of the colon leading to overgrowth of C. difficile.

    C. difficile produces toxins A and B which contribute to the development of CDAD. Hypertoxin producing strains of C. difficile cause increased morbidity and mortality, as these infections can be refractory to antimicrobial therapy and may require colectomy. CDAD must be considered in all patients who present with diarrhea following antibiotic use. Careful medical history is necessary since CDAD has been reported to occur over two months after the administration of antibacterial agents.

    If CDAD is suspected or confirmed, ongoing antibiotic use not directed against C. difficile may need to be discontinued. Appropriate fluid and electrolyte management, protein supplementation, antibiotic treatment of C. difficile, and surgical evaluation should be instituted as clinically indicated.


    General: Prescribing Ampicillin for Injection, USP in the absence of a proven or strongly suspected bacterial infection or a prophylactic indication is unlikely to provide benefit to the patient and increases the risk of the development of drug-resistant bacteria.

    The possibility of superinfections with mycotic organisms or bacterial pathogens should be kept in mind during therapy. In such cases, discontinue the drug and substitute appropriate treatment.

    A high percentage (43 to 100 percent) of patients with infectious mononucleosis who receive ampicillin develop a skin rash. Typically, the rash appears 7 to 10 days after the start of oral ampicillin therapy and remains for a few days to a week after the drug is discontinued. In most cases, the rash is maculopapular, pruritic, and generalized. Therefore, the administration of ampicillin is not recommended in patients with mononucleosis. It is not known whether these patients are truly allergic to ampicillin.

    Information for Patients: Patients should be counseled that antibacterial drugs including Ampicillin for Injection, USP should only be used to treat bacterial infections. They do not treat viral infections (e.g., the common cold). When Ampicillin for Injection, USP is prescribed to treat a bacterial infection, patients should be told that although it is common to feel better early in the course of therapy, the medication should be taken exactly as directed. Skipping doses or not completing the full course of therapy may (1) decrease the effectiveness of the immediate treatment and (2) increase the likelihood that bacteria will develop resistance and will not be treatable by Ampicillin for Injection, USP or other antibacterial drugs in the future.

    Diarrhea is a common problem caused by antibiotics which usually ends when the antibiotic is discontinued. Sometimes after starting treatment with antibiotics, patients can develop watery and bloody stools (with or without stomach cramps and fever) even as late as two or more months after having taken the last dose of the antibiotic. If this occurs, patients should contact their physician as soon as possible.

    Laboratory Tests: As with any potent drug, periodic assessment of organ system function, including renal, hepatic and hematopoietic, should be made during prolonged therapy.

    Transient elevation of serum transaminase has been observed following administration of ampicillin. The significance of this finding is not known.

    Drug Interactions: The concurrent administration of allopurinol and ampicillin increases substantially the incidence of skin rashes in patients receiving both drugs as compared to patients receiving ampicillin alone. It is not known whether this potentiation of ampicillin rashes is due to allopurinol or the hyperuricemia present in these patients.

    Drug/Laboratory Test Interactions: With high urine concentrations of ampicillin, false-positive glucose reactions may occur if Clinitest®, Benedict’s Solution, or Fehling’s Solution are used. Therefore, it is recommended that glucose tests based on enzymatic glucose oxidase reactions (such as Clinistix® or Tes-Tape) be used.

    Carcinogenesis, Mutagenesis and Impairment of Fertility: No long-term animal studies have been conducted with this drug.

    Pregnancy category B: Reproduction studies have been performed in laboratory animals at doses several times the human dose and have revealed no evidence of adverse effects due to ampicillin. There are, however, no adequate and well-controlled studies in pregnant women. Because animal reproduction studies are not always predictive of human response, this drug should be used during pregnancy only if clearly needed.

    Labor and Delivery: Oral ampicillin-class antibiotics are poorly absorbed during labor. Studies in guinea pigs showed that intravenous administration of ampicillin slightly decreased the uterine tone and frequency of contractions, but moderately increased the height and duration of contractions. However, it is not known whether use of these drugs in humans during labor or delivery has immediate or delayed adverse effects on the fetus, prolongs the duration of labor, or increases the likelihood that forceps delivery or other obstetrical intervention or resuscitation of the newborn will be necessary.

    Nursing Mothers: Ampicillin is excreted in trace amounts in human milk. Therefore, caution should be exercised when ampicillin-class antibiotics are administered to a nursing woman.

    Pediatric Use: Guidelines for the administration of these drugs to children are presented in DOSAGE AND ADMINISTRATION.


    As with other penicillins, it may be expected that untoward reactions will be essentially limited to sensitivity phenomena. They are more likely to occur in individuals who have previously demonstrated hypersensitivity to penicillins and in those with a history of allergy, asthma, hay fever or urticaria.

    The following adverse reactions have been reported as associated with the use of ampicillin:

    Gastrointestinal: Glossitis, stomatitis, black “hairy” tongue, nausea, vomiting, enterocolitis, pseudomembranous colitis, and diarrhea. (These reactions are usually associated with oral dosage forms.)

    Hypersensitivity Reactions: Skin rashes and urticaria have been reported frequently. A few cases of exfoliative dermatitis and erythema multiforme have been reported. Anaphylaxis is the most serious reaction experienced and has usually been associated with the parenteral dosage form.

    Note: Urticaria, other skin rashes, and serum sickness-like reactions may be controlled with antihistamines and, if necessary, systemic corticosteroids. Whenever such reactions occur, ampicillin should be discontinued, unless, in the opinion of the physician, the condition being treated is life-threatening and amenable only to ampicillin therapy. Serious anaphylactic reactions require the immediate use of epinephrine, oxygen, and intravenous steroids.

    Liver: A moderate rise in serum glutamic oxaloacetic transaminase (SGOT) has been noted, particularly in infants, but the significance of this finding is unknown. Mild transitory SGOT elevations have been observed in individuals receiving larger (two to four times) than usual and oft-repeated intramuscular injections. Evidence indicates that glutamic oxaloacetic transaminase (GOT) is released at the site of intramuscular injection of Ampicillin for Injection and that the presence of increased amounts of this enzyme in the blood does not necessarily indicate liver involvement.

    Hemic and Lymphatic Systems: Anemia, thrombocytopenia, thrombocytopenic purpura, eosinophilia, leukopenia, and agranulocytosis have been reported during therapy with the penicillins. These reactions are usually reversible on discontinuation of therapy and are believed to be hypersensitivity phenomena.

    To report SUSPECTED ADVERSE REACTIONS, contact FDA at 1-800-FDA-1088 or


    In cases of overdose, discontinue medication, treat symptomatically and institute supportive measures as required. In patients with renal function impairment, ampicillin-class antibiotics can be removed by hemodialysis but not peritoneal dialysis.


    This insert is for the Pharmacy Bulk Package and is intended for preparing IV admixtures only. Dosage recommendations for intramuscular or direct intravenous injection are for informational purposes only.

    Infections of the respiratory tract and soft tissues.

    Patients weighing 40 kg (88 lbs) or more: 250 to 500 mg every 6 hours.

    Patients weighing less than 40 kg (88 lbs): 25 to 50 mg/kg/day in equally divided doses at 6- to 8-hour intervals.

    Infections of the gastrointestinal and genitourinary tracts (including those caused by Neisseria gonorrhoeae in females).

    Patients weighing 40 kg (88 lbs) or more: 500 mg every 6 hours.

    Patients weighing less than 40 kg (88 lbs): 50 mg/kg/day in equally divided doses at 6- to 8-hour intervals.

    In the treatment of chronic urinary tract and intestinal infections, frequent bacteriological and clinical appraisal is necessary. Smaller doses than those recommended above should not be used. Higher doses should be used for stubborn or severe infections. In stubborn infections, therapy may be required for several weeks. It may be necessary to continue clinical and/or bacteriological follow-up for several months after cessation of therapy.

    Urethritis in males due to N. gonorrhoeae:

    Adults: Two doses of 500 mg each at an interval of 8 to 12 hours.

    Treatment may be repeated if necessary or extended if required.

    In the treatment of complications of gonorrheal urethritis, such as prostatitis and epididymitis, prolonged and intensive therapy is recommended. Cases of gonorrhea with a suspected primary lesion of syphilis should have darkfield examinations before receiving treatment. In all other cases where concomitant syphilis is suspected, monthly serological tests should be made for a minimum of four months.

    The doses for the preceding infections may be given by either the intramuscular or intravenous route. A change to oral ampicillin may be made when appropriate.

    Bacterial Meningitis.

    Adults and children: 150 to 200 mg/kg/day in equally divided doses every 3 to 4 hours. (Treatment may be initiated with intravenous drip therapy and continued with intramuscular injections.) The doses for other infections may be given by either the intravenous or intramuscular route.


    Adults and children: 150 to 200 mg/kg/day. Start with intravenous administration for at least three days and continue with the intramuscular route every 3 to 4 hours.

    Treatment of all infections should be continued for a minimum of 48 to 72 hours beyond the time that the patient becomes asymptomatic or evidence of bacterial eradication has been obtained. A minimum of 10-days treatment is recommended for any infection caused by Group A beta-hemolytic streptococci to help prevent the occurrence of acute rheumatic fever or acute glomerulonephritis.

    For Administration by Intravenous Infusion: Reconstitute as directed below (Directions for Proper Use of Pharmacy Bulk Package) prior to diluting with an intravenous solution.

    IMPORTANT: This chemical stability information in no way indicates that it would be acceptable practice to use this product well after the preparation time. Good professional practice suggests that compounded admixtures should be administered as soon after preparation as is feasible.

    Stability studies on ampicillin sodium at several concentrations in various intravenous solutions indicate the drug will lose less than 10% activity at the temperatures noted for the time periods stated.

    Room Temperature (25°C)



    Stability Periods

    Sterile Water for Injection

    up to 30 mg/mL

    8 hours

    Sodium Chloride Injection, USP 0.9%

    up to 30 mg/mL

    8 hours

    5% Dextrose in Water

    10 to 20 mg/mL

    1 hour

    5% Dextrose in Water

    up to 2 mg/mL

    2 hours

    5% Dextrose in 0.45% NaCl Inj.

    up to 2 mg/mL

    2 hours

    Lactated Ringer’s Solution

    up to 30 mg/mL

    8 hours

    Refrigerated (4°C)

    Sterile Water for Injection

    30 mg/mL

    48 hours

    Sterile Water for Injection

    up to 20 mg/mL

    72 hours

    Sodium Chloride Injection, USP, 0.9%

    30 mg/mL

    24 hours

    Sodium Chloride Injection, USP, 0.9%

    up to 20 mg/mL

    48 hours

    Lactated Ringer’s Solution

    up to 30 mg/mL

    24 hours

    5% Dextrose in Water

    up to 20 mg/mL

    1 hour

    5% Dextrose in 0.45% NaCl Inj.

    up to 10 mg/mL

    1 hour

    Only those solutions listed above should be used for the intravenous infusion of Ampicillin for Injection, USP. The concentrations should fall within the range specified. The drug concentration and the rate and volume of the infusion should be adjusted so that the total dose of Ampicillin is administered before the drug loses its stability in the solution in use.

    Directions for Proper Use of Pharmacy Bulk Package

    This glass Pharmacy Bulk Package bottle contains 10 grams Ampicillin and is designed for use in the pharmacy in preparing IV admixtures.

    Add 94 mL Sterile Water for Injection, USP. The resulting solution will contain 100 milligrams ampicillin activity per mL, and is stable up to one hour at room temperature.
    Dilute further within ONE HOUR to a concentration of 5 mg to 10 mg per mL. See TABLE for suitable fluid. Use promptly. This chemical stability information in no way indicates that it would be acceptable practice to use this product well after the preparation time. Good professional practice suggests that compounded admixtures should be administered as soon after preparation as is feasible.
    Using aseptic technique under a laminar flow hood, the closure should be penetrated only one time after reconstitution using a suitable sterile dispensing set which allows measured dispensing of the contents. Use of a syringe and needle is not recommended as it may cause leakage.
    After entry, use entire contents of Pharmacy Bulk Package bottle promptly. The entire contents of the Pharmacy Bulk Package bottle must be dispensed within ONE HOUR of reconstitution. This time limit should begin with the introduction of solvent in the Pharmacy Bulk Package bottle.
    A plastic bail band attached to the Pharmacy Bulk Package provides a suitable hanging device while dispensing contents.

    Use of this product is restricted to a suitable work area, such as a laminar flow hood. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit.


    Ampicillin for Injection, USP Pharmacy Bulk Package bottle, containing ampicillin sodium equivalent to 10 grams ampicillin per bottle is supplied as follows:

    NDC 10515-142-00          10 gram Pharmacy Bulk Package        (Tray of 10)

    Also available: Ampicillin for Injection, USP equivalent to 125, 250, 500 mg, 1 or 2 grams ampicillin as the sodium salt per vial.

    NDC 10515-143-00          125 mg vial                                         (Tray of 10)

    NDC 10515-145-00          250 mg vial                                         (Tray of 10)

    NDC 10515-146-00          500 mg vial                                         (Tray of 10)

    NDC 10515-772-00          1 gram vial                                          (Tray of 10)

    NDC 10515-140-00          2 gram vial                                          (Tray of 10)

    NDC 10515-147-00          500 mg “piggyback” vial                     (Tray of 10)

    NDC 10515-139-00          1 gram “piggyback” vial                      (Tray of 10)

    NDC 10515-141-00          2 gram “piggyback” vial                      (Tray of 10)

    Ampicillin for Injection, USP dry powder should be stored at 20° to 25°C (68° to 77°F) [see USP Controlled Room Temperature].

    CLINITEST® is a registered trademark of Siemans Medical Solutions Diagnostics.
    CLINISTIX® is a registered trademark of Bayer Healthcare LLC.

    Rx only

    G. C. Hanford Mfg. Co.
    Syracuse, New York 13201 USA

    Pharmacy Bulk Package
    INS11149 06                                                                                           07/2013


    10g Ampicillin for Injection tray

    NDC 10515-142-00

    Ampicillin for Injection, USP


    Not for Direct Infusion

    10 gram

    Rx only

    10 vials

    ampicillin sodium injection, powder, for solution
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:10515-142
    Route of AdministrationINTRAVENOUS
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:10515-142-0010 in 1 TRAY03/06/2008
    11 in 1 VIAL, GLASS; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    Labeler - GC Hanford Manufacturing Company (002238863)
    NameAddressID/FEIBusiness Operations
    GC Hanford Manufacturing Company002238863MANUFACTURE(10515-142) , ANALYSIS(10515-142)