DIRECTIONS
For Cleaning Pipelines and Milk Tanks
1. Rinse pipeline with clean warm 95°F (35°C) water immediately after useor as soon as tank is emptied.
2. Prepare a wash solution in hot 160°F (71°C) water. The amount of CIP6000G required for proper cleaning is related to water quality and systemdesign. Recommended dilution rates are indicated in the use concentrationchart, right. Circulate wash solution as long as 10 minutes, but not aftertemperature drops below 105°F (40°C).
3. Follow with proper North Country Acid Rinse per label directions.
4. Sanitize cleaned equipment with a North Country Sanitizer just prior touse and according to local health department regulations.

DANGER:
Harmful if swallowed. Contains Chlorine. Keep out of the reach of children. Do not take internally. Avoid contact with eyes, skin, clothing, and food. Avoid breathing vapors. Do not mix with acid detergents, since harmful vapors may be generated.

DANGER: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

FIRST AID:
IF SPLASHED IN EYES:Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Immediate medical attention is required.
IN CASE OF CONTACT: Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes.
Immediate medical attention is required.
IF INHALED:Move to fresh air. If breathing is difficult, give oxygen. Immediate medical attention is required.
IF SWALLOWED: Drink plenty of water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Immediate medical attention is required.