Label: DEXTROSE- dextrose monohydrate injection, solution

  • NDC Code(s): 17271-721-05, 17271-721-06, 17271-721-07
  • Packager: Becton Dickinson and Company
  • Category: HUMAN PRESCRIPTION DRUG LABEL

Drug Label Information

Updated May 2, 2022

If you are a healthcare professional or from the pharmaceutical industry please visit this version.

  • HIGHLIGHTS OF PRESCRIBING INFORMATION
    These highlights do not include all the information needed to use 10% DEXTROSE INJECTION safely and effectively. See full prescribing information for DEXTROSE INJECTION.
    10% DEXTROSE injection, USP for intravenous use
    Initial U.S. Approval: 1940

    RECENT MAJOR CHANGES

    Dosage and Administration (2.1, 2.2, 2.3) 9/2021
    Contraindications (4) 9/2021
    Warnings and Precautions (5.1, 5.2, 5.3, 5.4, 5.5, 5.6) 9/2021

    INDICATIONS AND USAGE

    Dextrose Injection is indicated as a source of water and calories. (1)

    DOSAGE AND ADMINISTRATION

    • Only for intravenous infusion. (2.1)
    • See full prescribing information for information on preparation, administration, dosing considerations and instructions for use. (2.1, 2.2, 2.3)

    DOSAGE FORMS AND STRENGTHS

    Injection:

    • 10% (0.1 grams/mL): 10 grams of dextrose hydrous per 100 mL in flexible containers: 250 mL, 500 mL, and 1000 mL. (3)

    CONTRAINDICATIONS

    • Clinically significant hyperglycemia. (4)
    • Known hypersensitivity to dextrose. (4)

    WARNINGS AND PRECAUTIONS

    • Hyperglycemia or Hyperosmolar Hyperglycemic State: Monitor blood glucose and administer insulin as needed. (5.1)
    • Hypersensitivity Reactions: Monitor for signs and symptoms and discontinue infusion if reactions occur. (5.2)
    • Vein Damage and Thrombosis: Consider central vein when administering more than 5% dextrose or with an osmolarity of at least 900 mOsm/L or when there is peripheral vein irritation, phlebitis, and/or associated pain. (2.2, 5.3)
    • Hyponatremia: Avoid in patients with or at risk for hyponatremia. If use cannot be avoided, monitor serum sodium concentrations. (5.4)
    • Electrolyte Imbalance and Fluid Overload: Avoid in patients with or at risk for fluid and/or solute overloading. If use cannot be avoided, monitor daily fluid balance, electrolyte concentrations, and acid-base balance, as needed and especially during prolonged use. (5.5)
    • Refeeding Syndrome: Monitor severely undernourished patients and slowly increase nutrient intake. (5.6)

    ADVERSE REACTIONS

    The most common adverse reactions are, hyperglycemia, hypersensitivity reactions, hyponatremia, infection both systemic and at the injection site, vein thrombosis or phlebitis, and electrolyte imbalance. (6)

    To report SUSPECTED ADVERSE REACTIONS, contact Fresenius Kabi USA, LLC at 1-800-551-7176 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.

    DRUG INTERACTIONS

    Other Products that Affect Glycemic Control, Vasopressin or Fluid and/or Electrolyte Balance: Monitor blood glucose concentrations, fluid balance, serum electrolyte concentrations and acid-base balance. (7.1)

    USE IN SPECIFIC POPULATIONS

    Pediatric Use: Increased risk of hypoglycemia/hyperglycemia; monitor serum glucose concentrations. (8.4)

    See 17 for PATIENT COUNSELING INFORMATION.

    Revised: 2/2022

  • Table of Contents
  • 1 INDICATIONS AND USAGE

    10% Dextrose Injection is indicated as source of water and calories.

  • 2 DOSAGE AND ADMINISTRATION

    2.1 Important Administration Instructions

    • 10% Dextrose Injection is intended for intravenous use.
    • Peripheral administration of 5% dextrose is generally acceptable, however, consider central vein when administering more than 5% dextrose or with an osmolarity of at least 900 mOsm/L or when there is peripheral vein irritation, phlebitis, and/or associated pain [see Warnings and Precautions (5.3)].
    • Do not administer 10% Dextrose Injection simultaneously with blood products through the same administration set because of the possibility of pseudoagglutination or hemolysis.
    • To prevent air embolism, use a non-vented infusion set or close the vent on a vented set, avoid multiple connections, do not connect flexible containers in series, fully evacuate residual gas in the container prior to administration, do not pressurize the flexible container to increase flow rates, and if administration is controlled by a pumping device, turn off pump before the container runs dry.
    • Prior to infusion, visually inspect the diluted dextrose solution for particulate matter. The solution should be clear and there should be no precipitates. Do not administer unless solution is clear and container is undamaged.
    • Use of a final filter is recommended during administration of parenteral solutions, where possible.

    2.2 Recommended Dosage

    The choice of dextrose concentration, rate and volume depends on the age, weight, clinical and metabolic conditions of the patient and concomitant therapy. Electrolyte supplementation may be indicated according to the clinical needs of the patient.

    The administration rate should be governed, especially for premature infants with low birth weight, during the first few days of therapy, by the patient's tolerance to dextrose.

    Increase the infusion rate gradually as indicated by frequent monitoring of blood glucose concentrations [see Warnings and Precautions (5.1), Use in Specific Populations (8.4)].

    2.3 Instructions for Use

    Check flexible container solution composition, lot number, and expiry date. Prior to administration, visually inspect for particulate matter and discoloration.

    The intact port caps provides visual tamper evidence. Do not use if a port cap is prematurely removed. Do not remove solution container from its overwrap until immediately before use. Use sterile equipment and aseptic technique.

    To Open

    1. Place the solution container on a clean, flat surface. Using the pre-cut corner tabs, peel open the overwrap and remove solution container.
    2. Check the solution container for leaks by squeezing firmly. If leaks are found, or if the seal is not intact, discard the solution.
    3. Do not use if the solution is cloudy or a precipitate is present.

    To Add Medication

    1. Identify WHITE Additive Port with arrow pointing toward container.
    2. Immediately before injecting additives, break off WHITE Additive Port Cap with the arrow pointing toward container.
    3. Hold base of WHITE Additive Port horizontally.
    4. Insert needle (18 to 23 gauge) horizontally through the center of WHITE Additive Port's septum and inject additives.
    5. Mix container contents thoroughly. For high density medication such as potassium chloride, squeeze ports while ports are upright and mix thoroughly.

    Preparation for Administration

    1. Immediately before inserting the infusion set, break off BLUE Infusion Port Cap with the arrow pointing away from container.
    2. Use a non-vented infusion set or close the air-inlet on a vented set.
    3. Close the roller clamp of the infusion set.
    4. Hold the base of BLUE Infusion Port.
    5. Insert spike through BLUE Infusion Port by rotating wrist slightly until the spike is inserted.
    6. Suspend solution container from hanger hole
    7. For Single Use Only. Discard unused portion.

    NOTE: See full directions accompanying administration set.

    WARNING: Do not use flexible container in series connections.

  • 3 DOSAGE FORMS AND STRENGTHS

    10% Dextrose Injection, USP is a clear, sterile, non-pyrogenic solution of dextrose in single-dose flexible plastic containers

    • 10% (0.1 grams/mL): 10 grams of dextrose hydrous per 100 mL in flexible plastic containers: 250 mL, 500 mL, and 1000 mL
  • 4 CONTRAINDICATIONS

    The use of Dextrose Injection is contraindicated in patients with:

    • Clinically significant hyperglycemia [see Warnings and Precautions (5.1)].

    • Known hypersensitivity to dextrose [see Warnings and Precautions (5.2)].

  • 5 WARNINGS AND PRECAUTIONS

    5.1 Hyperglycemia and Hyperosmolar Hyperglycemic State

    The use of dextrose infusions in patients with impaired glucose tolerance may worsen hyperglycemia. Administration of dextrose at a rate exceeding the patient's utilization rate may lead to hyperglycemia, coma, and death.

    Hyperglycemia is associated with an increase in serum osmolality, resulting in osmotic diuresis, dehydration and electrolyte losses [see Warnings and Precautions (5.5)]. Patients with underlying CNS disease and renal impairment who receive dextrose infusions, may be at greater risk of developing hyperosmolar hyperglycemic state.

    Monitor blood glucose levels and treat hyperglycemia to maintain levels within normal limits while administering 10% Dextrose Injection. Insulin may be administered or adjusted to maintain optimal blood glucose levels during 10% Dextrose Injection administration.

    5.2 Hypersensitivity Reactions

    Hypersensitivity and infusion reactions, including anaphylaxis, have been reported with 10% Dextrose Injection [see Adverse Reactions (6)]. Stop infusion immediately and treat patient accordingly if signs or symptoms of a hypersensitivity reaction develop. Appropriate therapeutic countermeasures must be instituted as clinically indicated.

    5.3 Vein Damage and Thrombosis

    Peripheral administration of 5% Dextrose Injection is generally acceptable, however, consider central vein when administering more than 5% dextrose or with an osmolarity of at least 900 mOsm/L or when there is peripheral vein irritation, phlebitis, and/or associated pain [see Dosage and Administration (2.1)]. The infusion of hypertonic solutions into a peripheral vein may result in vein irritation, vein damage, and/or thrombosis. The primary complication of peripheral access is venous thrombophlebitis, which manifests as pain, erythema, tenderness or a palpable cord. Remove the catheter as soon as possible, if thrombophlebitis develops.

    5.4 Hyponatremia

    10% Dextrose Injection is a hypertonic solution [see Description, Table 1 (11)]. In the body, however, glucose containing fluids can become extremely physiologically hypotonic due to rapid glucose metabolization. Monitoring of serum sodium is particularly important for hypotonic fluids.

    Depending on the tonicity of the solution, the volume and rate of infusion, and depending on a patient's underlying clinical condition and capability to metabolize glucose, intravenous administration of glucose can cause electrolyte disturbances, most importantly hypo- or hyperosmotic hyponatremia. Monitor serum sodium to minimize the risk of hyponatremia.

    The risk for hyponatremia is increased in pediatric patients, elderly patients, postoperative patients, those with psychogenic polydipsia, and in patients treated with medications that increase the risk of hyponatremia (such as diuretics, certain antiepileptic and psychotropic medications). Close clinical monitoring may be warranted.

    Acute hyponatremia can lead to acute hyponatremic encephalopathy characterized by headache, nausea, seizures, lethargy and vomiting. Patients with brain edema are at particular risk of severe, irreversible and life-threatening brain injury. Patients at increased risk for developing complications of hyponatremia, such as hyponatremic encephalopathy include pediatric patients; women, in particular, premenopausal women; patients with hypoxemia; and in patients with underlying central nervous system disease [see Use in Specific Populations (8.4, 8.5)].

    Avoid Dextrose Injection in patients with or at risk for hyponatremia. If use cannot be avoided, monitor serum sodium concentrations.

    Rapid correction of hyponatremia is potentially dangerous with risk of serious neurologic complications. Brain adaptations reducing risk of cerebral edema make the brain vulnerable to injury when chronic hyponatremia is too rapidly corrected, which is known as osmotic demyelination syndrome (ODS). To avoid complications, monitor serum sodium and chloride concentrations, fluid status, acid-base balance, and signs of neurologic complications.

    High volume infusion must be used with close monitoring in patients with cardiac or pulmonary failure, and in patients with non-osmotic vasopressin release (including SIADH), due to the risk of hospital-acquired hyponatremia.

    5.5 Electrolyte Imbalance and Fluid Overload

    Electrolyte deficits, particularly in serum potassium and phosphate, may occur during prolonged use of concentrated dextrose solutions.

    Depending on the volume and rate of infusion, the patient's underlying clinical condition and capability to metabolize dextrose, intravenous administration of 10% Dextrose Injection can cause fluid and/or solute overloading resulting in dilution of serum electrolyte concentrations, (including hypoosmotic hyponatremia), overhydration, congested states or pulmonary edema. The risk of dilutional states is inversely proportional to the electrolyte concentrations in the administered solution. The risk of solute overload causing congested states with peripheral and pulmonary edema is directly proportional to the electrolyte concentrations in the solution.

    Avoid Dextrose Injection in patients with or at risk for fluid and/or solute overloading. If use cannot be avoided, monitor fluid balance, blood electrolyte levels, concentration of glucose, acid-base balance, correct fluid and electrolyte imbalances during prolonged parenteral therapy or whenever the condition of the patient or the rate of administration warrants such evaluation and acid-base balance as needed and especially during prolonged use. Additional monitoring is recommended for patients with water and electrolyte disturbances that could be aggravated by increased glucose, insulin administration and/or free water load. Patients at increased risk for developing hyponatremic encephalopathy include pediatric patients; elderly patients, women, in particular premenopausal women; patients with hypoxemia; and patients with underlying CNS disease [see Use in Specific Populations (8.4, 8.5)].

    5.6 Refeeding Syndrome

    Refeeding severely undernourished patients may result in refeeding syndrome, characterized by the intracellular shift of potassium, phosphorus, and magnesium as the patient becomes anabolic. Thiamine deficiency and fluid retention may also develop. To prevent these complications, monitor severely undernourished patients and slowly increase nutrient intake.

  • 6 ADVERSE REACTIONS

    The following adverse reactions associated with the use of dextrose injection were identified in clinical trials or postmarketing reports. Because these reactions were reported voluntarily from a population of uncertain size, it is not always possible to estimate their frequency, reliably, or to establish a causal relationship to drug exposure.

    The following clinically significant adverse reactions are described elsewhere in the labeling:

    • Hyperglycemia and hyperosmolar hyperglycemic state [see Warnings and Precautions (5.1)]
    • Hypersensitivity Reactions: anaphylaxis, pruritus, bronchospasm, cyanosis, angioedema, hypotension, pyrexia, chills, and rash [see Warnings and Precautions (5.2)]
    • Infusion Site Reactions: infusion site phlebitis, infusion site erythema, vein damage and thrombosis, and infusion site thrombophlebitis [see Warnings and Precautions (5.3)]
    • Hyponatremia and hyponatremic encephalopathy [see Warnings and Precautions (5.4)]
    • Electrolyte imbalance, fluid overload and hypervolemia [see Warnings and Precautions (5.5)]
    • Refeeding syndrome [see Warnings and Precautions (5.6)]
    • Pulmonary vascular precipitates
  • 7 DRUG INTERACTIONS

    7.1 Other Products that Affect Glycemic Control, Vasopressin or Fluid and/or Electrolyte Balance

    Dextrose Injection can affect glycemic control, vasopressin and fluid and/or electrolyte balance [see Warnings and Precautions (5.1, 5.4, 5.5)]. Monitor blood glucose concentrations, fluid balance, serum electrolyte concentrations and acid-base balance when using Dextrose Injection in patients treated with other substances that affect glycemic control, vasopressin or fluid and/or electrolyte balance.

  • 8 USE IN SPECIFIC POPULATIONS

    8.1 Pregnancy

    Risk Summary

    Appropriate administration of 10% Dextrose Injection during pregnancy is not expected to cause adverse developmental outcomes, including congenital malformations. Animal reproduction studies have not been conducted with injectable dextrose solutions.

    The estimated background risk of major birth defects and miscarriage for the indicated population is unknown. All pregnancies have a background risk of birth defect, loss, or other adverse outcomes. In the U.S. general population, the estimated background risk of major birth defects and miscarriage in clinically recognized pregnancies is 2 to 4% and 15 to 20%, respectively.

    8.2 Lactation

    Risk Summary

    There are no data on the presence of dextrose in human milk, the effects on a breastfed infant, or the effects on milk production. The lack of clinical data during lactation precludes a clear determination of the risk of 10% Dextrose Injection to an infant during lactation; therefore, the developmental and health benefits of breastfeeding should be considered along with the mother's clinical need for 10% Dextrose Injection and any potential adverse effects on the breastfed infant from 10% Dextrose Injection or from the underlying maternal condition.

    8.4 Pediatric Use

    The safety profile of 10% Dextrose Injection in pediatric patients is similar to adults.

    Neonates, especially premature infants with low birth weight, are at increased risk of developing hypo- or hyperglycemia and therefore need close monitoring during treatment with intravenous glucose infusions to ensure adequate glycemic control in order to avoid potential long-term adverse effects.

    Closely monitor plasma electrolyte concentrations in pediatric patients who may have impaired ability to regulate fluids and electrolytes. In very low birth weight infants, excessive or rapid administration of 10% Dextrose Injection may result in increased serum osmolality and risk of intracerebral hemorrhage.

    Children (including neonates and older children) are at increased risk of developing hyponatremia as well as for developing hyponatremic encephalopathy [see Warnings and Precautions (5.4)].

    8.5 Geriatric Use

    Clinical studies of 10% Dextrose Injection did not include sufficient numbers of subjects aged 65 and over to determine whether they respond differently from younger subjects. Elderly patients are at increased risk of developing hyponatremia as well as for developing hyponatremic encephalopathy [see Warnings and Precautions (5.4)]. Other reported clinical experience has not identified differences in responses between the elderly and younger patients. In general, dose selection for an elderly patient should be cautious, usually starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac function, and of concomitant disease or other drug therapy.

    Dextrose is known to be substantially excreted by the kidney, and the risk of toxic reactions to this drug may be greater in patients with impaired renal function. Because elderly patients are more likely to have decreased renal function, care should be taken in dose selection, and it may be useful to monitor renal function.

  • 10 OVERDOSAGE

    An increased infusion rate of 10% Dextrose Injection or administration of dextrose solutions can cause hyperglycemia, hyperosmolality, and adverse effects on water and electrolyte balance [see Warnings and Precautions (5.1, 5.5)].

    Severe hyperglycemia and severe dilutional hyponatremia, and their complications, can be fatal. Discontinue infusion, reduce dose and institute appropriate corrective measures such as administration of exogenous insulin.

    Discontinue infusion and institute appropriate corrective measures in the event of overhydration or solute overload during therapy, with particular attention to CNS, respiratory and cardiovascular systems.

    If over-exposure occurs, call your Poison Control Center at 1-800-222-1222 for current information on the management of poisoning or overdosage.

  • 11 DESCRIPTION

    10% Dextrose Injection, USP is a sterile, non-pyrogenic solution for fluid replenishment and caloric supply in single dose containers for intravenous administration.

    The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5)

    Table 1. Contents and Characteristics of Dextrose Injection 10%, USP

    *Caloric value calculated on the basis of 3.4 kcal/g of dextrose, hydrous

    StrengthFill VolumeAmount of Dextrose Hydrous per Containerkcal* per ContainerOsmolarity (mOsmol per liter)
    Dextrose Injection 10%, USP (0.1 grams/mL) 250 mL 25 grams 85 505
    500 mL 50 grams 170 505
    1000 mL 100 grams 340 505

    Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 • H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula:

    Structural Formula

    Water for Injection, USP is chemically designated H2O.

    Dextrose is derived from corn.

    The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.

    The flexible container is a closed system, and air is prefilled in the container to facilitate drainage. The container does not require entry of external air during administration.

    The container has two ports: one is the administration outlet port for attachment of an intravenous administration set and the other port has a medication site for addition of supplemental medication ([see Instructions for Use (2.3)]). The primary function of the overwrap is to protect the container from the physical environment.

  • 12 CLINICAL PHARMACOLOGY

    12.1 Mechanism of Action

    Dextrose is oxidized to carbon dioxide and water, yielding energy.

  • 16 HOW SUPPLIED/STORAGE AND HANDLING

    10% Dextrose Injection, USP is supplied in single dose flexible plastic containers as follows:

    Product NumberUnit of SaleStrengthEach
    1727172105 NDC 17271-721-05 Package of 30 freeflex® bag 25 grams per 250 mL
    (100 mg per mL)
    NDC 17271-721-05 One 250 mL freeflex® bag
    1727172106 NDC 17271-721-06 Package of 20 freeflex® bag 50 grams per 500 mL
    (100 mg per mL)
    NDC 17271-721-06 One 500 mL freeflex® bag
    1727172107 NDC 17271-721-07 Package of 10 freeflex® bag 100 grams per 1,000 mL (100 mg per mL) NDC 17271-721-07 One 1000 mL freeflex® bag

    Exposure of pharmaceutical products to heat should be minimized. Avoid excessive heat.

  • STORAGE AND HANDLING

    STORE AT: 20° to 25°C (68° to 77°F) [see USP Controlled Room Temperature]; brief exposure up to 40°C/104°F does not adversely affect the product. Keep from freezing.

    The container closure is not made with natural rubber latex. Non-PVC, Non-DEHP, Sterile.

  • 17 PATIENT COUNSELING INFORMATION

    Inform patients, caregivers, or home healthcare providers of the following risks of 10% Dextrose Injection:

    • Hyperglycemia and hyperosmolar hyperglycemic state [see Warnings and Precautions (5.1)]
    • Hypersensitivity reactions [see Warnings and Precautions (5.2)]
    • Vein damage and thrombosis [see Warnings and Precautions (5.3)]
    • Hyponatremia [see Warnings and Precautions (5.4)]
    • Electrolyte imbalance and fluid overload [see Warnings and Precautions (5.5)]
    • Refeeding syndrome [see Warnings and Precautions (5.6)]

    Manufactured for:

    BD Logo

    Becton, Dickinson and Company
    1 Becton Drive
    Franklin Lakes, NJ 07417 USA
    For product inquiry: 1-800-523-0502
    Distributed by BD. Manufactured by Fresenius Kabi.

    Made in Germany

    451636A

  • PRINCIPAL DISPLAY PANEL

    PACKAGE LABEL - PRINCIPAL DISPLAY – 10% Dextrose Bag Label
    NDC 17271-721-05
    free flex® 250 mL

    10% Dextrose Injection, USP

    25 grams per 250 mL (100 mg per mL)

    For intravenous use. Rx only

    PACKAGE LABEL - PRINCIPAL DISPLAY – 10% Dextrose Bag Label
  • PRINCIPAL DISPLAY PANEL

    PACKAGE LABEL - PRINCIPAL DISPLAY – 10% Dextrose Case Label
    NDC 17271-721-05
    10% Dextrose Injection, USP

    250 mL x 30

    PACKAGE LABEL - PRINCIPAL DISPLAY – 10% De
  • PRINCIPAL DISPLAY PANEL

    PACKAGE LABEL - PRINCIPAL DISPLAY PANEL - 10% Dextrose Bag Label

    NDC 17271-721-06

    free flex® 500 mL

    10% Dextrose Injection, USP

    50 grams per 500 mL (100 mg per mL)

    For intravenous use. Rx only

    PACKAGE LABEL - PRINCIPAL DISPLAY PANEL - 10% Dextrose Bag Label
  • PRINCIPAL DISPLAY PANEL

    PACKAGE LABEL - PRINCIPAL DISPLAY PANEL - 10% Dextrose Case Label

    NDC 17271-721-06

    10% Dextrose Injection, USP

    500 mL x 20

    PACKAGE LABEL - PRINCIPAL DISPLAY PANEL - 10% Dextrose Case Label
  • PRINCIPAL DISPLAY PANEL

    PACKAGE LABEL - PRINCIPAL DISPLAY PANEL - 10% Dextrose Bag Label

    NDC 17271-721-07

    free flex® 1,000 mL

    10% Dextrose Injection, USP

    100 grams per 1,000 mL (100 mg per mL)

    For intravenous use. Rx only

    PACKAGE LABEL - PRINCIPAL DISPLAY PANEL - 10% Dextrose Bag Label
  • PRINCIPAL DISPLAY PANEL

    PACKAGE LABEL - PRINCIPAL DISPLAY PANEL - 10% Dextrose Case Label

    NDC 17271-721-07

    10% Dextrose Injection, USP

    1,000 mL x 10

    PACKAGE LABEL - PRINCIPAL DISPLAY PANEL - 10% Dextrose Case Label
  • INGREDIENTS AND APPEARANCE
    DEXTROSE 
    dextrose monohydrate injection, solution
    Product Information
    Product TypeHUMAN PRESCRIPTION DRUGItem Code (Source)NDC:17271-721
    Route of AdministrationINTRAVENOUS
    Active Ingredient/Active Moiety
    Ingredient NameBasis of StrengthStrength
    DEXTROSE MONOHYDRATE (UNII: LX22YL083G) (ANHYDROUS DEXTROSE - UNII:5SL0G7R0OK) DEXTROSE MONOHYDRATE 100 mg  in 1 mL
    Packaging
    #Item CodePackage DescriptionMarketing Start DateMarketing End Date
    1NDC:17271-721-0530 in 1 CASE02/05/2020
    1250 mL in 1 BAG; Type 0: Not a Combination Product
    2NDC:17271-721-0620 in 1 CASE02/05/2020
    2500 mL in 1 BAG; Type 0: Not a Combination Product
    3NDC:17271-721-0710 in 1 CASE02/05/2020
    31000 mL in 1 BAG; Type 0: Not a Combination Product
    Marketing Information
    Marketing CategoryApplication Number or Monograph CitationMarketing Start DateMarketing End Date
    ANDAANDA20944802/05/2020
    Labeler - Becton Dickinson and Company (124987988)
    Establishment
    NameAddressID/FEIBusiness Operations
    Fresenius Kabi Deutschland GmbH506719546ANALYSIS(17271-721) , MANUFACTURE(17271-721)