Uses
- For flushing or irrigating the eye to remove loose foreign material, air pollutants, or chlorinated water.
Warnings
For external use only- Obtain immidiate medical treatment for all open wounds in or near the eyes. To avoid contamination, do not touch tip of container to any surface. Replace cap after use.
Do not use
- in concentrated form
- while wearing contact lenses
- if solution changes color or becomes cloudy
- for injection
- in intraocular surgery
- internally
- if eye is lacerated or object is embedded
- if seal is broken
Directions
- Concentrate must be diluted (1) part concentrate to (10) parts potable water before use
- Prepare sufficient quantity of constituted eyewash solution in advance of an emergency
- Mix concentrate with potable water to prepare eyewash solution as follows:
- Determine quantity of eyewash solution required
- Follow sanitary procedures
- Wear protective eyewear and gloves
- Pour 1/3 of required amount of potable water into mixing container or eyewash unit
- Add 1/3 of required amount of concentrate to water
- Agitate or mix thoroughly
- Repeat until required amount of solution is prepared
- Properly dispose of empty bottle after use
Do not reuse.
- Replace solution no longer than (6) months after mixing
Inactive ingredients
benzalkonium chloride, edetate disodium, sodium chloride, sodium phosphate dibasic, sodium phosphate monobasic
