First, wear gloves before starting the coloring session. Pour an equal amount of #1(colorant) & #2(developer) into the provided plastic container and close the cap until you hear the click sound. Mix well by shaking the container horizontally or sideways until the mixture turns to gel. (Do NOT shake the container vertically or up & down). Carefully open the container from the side and scoop the contents on hand to start the procedure. Use appropriate amounts as you color by sections to apply the gel to the top, sides, and the back. Gently rub the gel against hair. With the remaining gel, lightly apply along the hairline to finish the procedure. Wait according to the indicated time for the color to process (20min. to cover gray hair). After the desired color is obtained, wash and rinse several times with lukewarm water until water runs clear. NOTE: Leave extra 10 min. for thick hair and/or if the coloring procedure is done at cool temperature (below room temperature).
For external use only.
This product contains ingredients which may cause skin irritation on certain individuals and a preliminary test should first be made. This product must not be used for dyeing of eyelashes or eyebrows. If you were to do so, it may cause blindness. When product comes in contact with eyes during the coloring session, rinse immediately with cool, running water and consult a physician immediately. Keep out of reach of children. If swallowed, get medical help or contact a Poison Control Center right away. Processed color may be different from the color chart indicated on the box due to condition of individual, hair, and/or temperature. Before coloring, please read the instructions thoroughly.
