Label: RECOMBINATE- antihemophilic factor recombinant   

  • NDC Code(s): 0944-2831-01, 0944-2832-01, 0944-2833-01, 0944-2834-01, view more
    0944-2835-01, 0944-2841-10, 0944-2842-10, 0944-2843-10, 0944-2844-10, 0944-2845-10, 52919-003-08
  • Packager: Baxter Healthcare Corporation
  • Category: PLASMA DERIVATIVE
  • DEA Schedule: None
  • Marketing Status: Biologic Licensing Application

Drug Label Information

Updated 12/10

If you are a consumer or patient please visit this version.

  • SPL UNCLASSIFIED SECTION

     Lyophilized Powder for Reconstitution for injection

    Reconstitute with 5 mL of Sterile Water for Injection using BAXJECT II

    Close
  • DESCRIPTION

    RECOMBINATE [Antihemophilic Factor (Recombinant)] is a glycoprotein synthesized by a genetically engineered Chinese Hamster Ovary (CHO) cell line. In culture, the CHO cell line secretes recombinant Factor VIII (rFVIII) into the cell culture medium. The rFVIII is purified from the culture medium utilizing a series of chromatography columns. A key step in the purification process is an immunoaffinity chromatography methodology in which a purification matrix, prepared by immobilization of a monoclonal antibody directed to Factor VIII, is utilized to selectively isolate the rFVIII in the medium. The synthesized rFVIII produced by the CHO cells has the same biological effects as human Factor VIII. Structurally the protein has a similar combination of heterogenous heavy and light chains as found in human Factor VIII.

    RECOMBINATE is formulated as a sterile, nonpyrogenic, off-white to faint yellow, lyophilized powder preparation of concentrated recombinant Factor VIII for intravenous injection. RECOMBINATE is available in single-dose vials, which contain nominally 250, 500, 1000, 1500, and 2000 International Units per vial. When reconstituted with the appropriate volume of diluent, the product contains the following stabilizers in maximum amounts: For 5 mL reconstitution volume: 25 mg/mL Albumin (Human), 0.40 mg/mL calcium, 3 mg/mL polyethylene glycol (3350), 360 mEq/L sodium, 110 mM histidine, and 1.5 µg/Factor VIII International Unit (IU) polysorbate-80. Recombinant Von Willebrand Factor (rVWF) is coexpressed with the rFVIII and helps to stabilize it. The final product contains not more than 2 ng rVWF/IU rFVIII, which will not have any clinically relevant effect in patients with von Willebrand’s disease. The product contains no preservative.

    Each vial of RECOMBINATE is labeled with the Factor VIII activity expressed in IU per vial. Biological potency is determined by an in vitro assay which is referenced to the World Health Organization (WHO) International Standard for Factor VIII:C Concentrate.

    Close
  • CLINICAL PHARMACOLOGY

    Factor VIII is the specific clotting factor deficient in patients with hemophilia A (classical hemophilia). Hemophilia A is a genetic bleeding disorder characterized by hemorrhages, which may occur spontaneously or after minor trauma. The administration of RECOMBINATE provides an increase in plasma levels of Factor VIII and can temporarily correct the coagulation defect in these patients. Pharmacokinetic studies on sixty-nine (69) patients revealed the circulating mean half-life for RECOMBINATE to be 14.6 ± 4.9 hours (n=67), which was not statistically significantly different from plasma-derived HEMOFIL M, [Antihemophilic Factor (Human), Method M, Monoclonal Purified]. The mean half-life of HEMOFIL M was 14.7 ± 5.1 hours (n=61). The actual baseline recovery observed with RECOMBINATE was 123.9 ± 47.7 IU/dL (n=23), which is significantly higher than the actual HEMOFIL M baseline recovery of 101.7 ± 31.6 IU/dL (n=61). However, the calculated ratio of actual to expected recovery with RECOMBINATE (121.2 ± 48.9%) is not different on average from HEMOFIL M (123.4 ± 16.4%).

    The clinical study of  RECOMBINATE in previously treated patients (individuals with hemophilia A who had been treated with plasma derived Factor VIII) was based on observations made on a study group of 69 patients. These individuals received cumulative amounts of Factor VIII ranging from 20,914 to 1,383,063 IU over the 48 month study. Patients were given a total of 17,700 infusions totaling 28,090,769 IU RECOMBINATE.

    These patients were successfully treated for bleeding episodes on a demand basis and also for the prevention of bleeds (prophylaxis). Spontaneous bleeding episodes successfully managed include hemarthroses, soft tissue and muscle bleeds. Management of hemostasis was also evaluated in surgeries. A total of 24 procedures on 13 patients were performed during this study. These included minor (e.g. tooth extraction) and major (e.g. bilateral osteotomies, thoracotomy and liver transplant) procedures. Hemostasis was maintained perioperatively and postoperatively with individualized Factor VIII replacement.

    A study of RECOMBINATE in previously untreated patients was also performed as part of an ongoing study. The study group was comprised of seventy-nine (79)1 patients, of whom seventy-six (76) had received at least one infusion of RECOMBINATE. To date, this cohort has been given 12,209 infusions totaling over 11,277,043 IU of RECOMBINATE. Hemostasis was appropriately managed in spontaneous bleeding episodes, intracranial hemorrhage and surgical procedures.

    Close
  • INDICATIONS and USAGE

    The use of RECOMBINATE [Antihemophilic Factor (Recombinant)] is indicated in hemophilia A (classical hemophilia) for the prevention and control of hemorrhagic episodes.2 RECOMBINATE is also indicated in the perioperative management of patients with hemophilia A (classical hemophilia).

    RECOMBINATE can be of therapeutic value in patients with acquired Factor VIII inhibitors not exceeding 10 Bethesda Units per mL.3  In clinical studies with RECOMBINATE, patients with inhibitors who were entered into the previously treated patient trial and those previously untreated children who have developed inhibitor activity on study, showed clinical hemostatic response when the titer of inhibitor was less than 10 Bethesda Units per mL. However, in such uses, the dosage of RECOMBINATE should be controlled by frequent laboratory determinations of circulating Factor VIII levels as well as the clinical status of the patient.

    RECOMBINATE is not indicated in von Willebrand’s disease.

    Close
  • CONTRAINDICATIONS

    RECOMBINATE is contraindicated in patients who have manifested life-threatening immediate hypersensitivity reactions, including anaphylaxis, to the product or its components, including bovine, mouse or hamster proteins.

    Close
  • WARNINGS

    General

    The clinical response to RECOMBINATE may vary. If bleeding is not controlled with the recommended dose, the plasma level of factor VIII should be determined and a sufficient dose of RECOMBINATE should be administered to achieve a satisfactory clinical response. If the patient’s plasma factor VIII level fails to increase as expected or if bleeding is not controlled after the expected dose, the presence of an inhibitor (neutralizing antibodies) should be suspected and appropriate testing performed. (see PRECAUTIONS - Monitoring Laboratory Tests).

    Anaphylaxis and Severe Hypersensitivity Reactions

    Allergic type hypersensitivity reactions, including anaphylaxis, have been reported with RECOMBINATE and have been manifested as dizziness, pruritus, rash, urticaria, flushing, angioedema/face swelling, laryngeal edema, dyspnea, pallor, pyrexia, nausea, paresthesia, hypotension, and loss of consciousness. Discontinue RECOMBINATE if symptoms occur and seek immediate emergency treatment. RECOMBINATE contains trace amounts of bovine proteins, mouse immunoglobulin G (MuIgG), and hamster (CHO) proteins. Patients treated with this product may develop hypersensitivity to these non-human mammalian proteins.

    Neutralizing Antibodies

    Patients treated with antihemophilic factor (AHF) products should be carefully monitored for the development of factor VIII inhibitors by appropriate clinical observations and laboratory tests. Inhibitors have been reported following administration of RECOMBINATE predominantly in previously untreated and minimally treated patients. The risk of developing inhibitors is highest during the first 20 exposure days. If expected plasma factor VIII activity levels are not attained, or if bleeding is not controlled with an expected dose, an assay that measures factor VIII inhibitor concentration should be performed (see PRECAUTIONS -Monitoring Laboratory Tests).

    Close
  • PRECAUTIONS

    General

     Certain components used in the packaging of this product contain natural rubber latex.

    Identification of the clotting defect as a Factor VIII deficiency is essential before the administration of RECOMBINATE [Antihemophilic Factor (Recombinant)] is initiated. No benefit may be expected from this product in treating other deficiencies.


    Formation of Antibodies to Mouse, Hamster or Bovine Protein

    As RECOMBINATE contains trace amounts of mouse protein (maximum of 0.1 ng/IU RECOMBINATE), hamster protein (maximum of 1.5 ng CHO protein/IU RECOMBINATE), and bovine protein (maximum of 1 ng BSA/IU RECOMBINATE), the remote possibility exists that patients treated with this product may develop hypersensitivity to these non-human mammalian proteins.

    Information for Patients

    The patient and physician should discuss the risks and benefits of this product.

    Allergic type hypersensitivity reactions have been observed with RECOMBINATE. Patients should be informed of the early signs of hypersensitivity reactions including hives, generalized urticaria, tightness of the chest, wheezing, hypotension, symptoms of laryngeal edema, and anaphylaxis. Patients should be advised to discontinue use of the product and contact their physician if these symptoms occur. Additionally, patients should be informed that local tissue irritation may occur when infusing RECOMBINATE reconstituted with 5 mL sWFI.

    Monitoring Laboratory Tests

    • Monitor plasma factor VIII activity levels by the one-stage clotting assay to confirm the adequate factor VIII levels have been achieved and maintained, when clinically indicated. (seeDOSAGE AND ADMINISTRATION).
    • Monitor for development of factor VIII inhibitors. Perform assay to determine if factor VIII inhibitor is present if expected factor VIII activity plasma levels are not attained, or if bleeding is not controlled with the expected dose of RECOMBINATE. Use Bethesda Units (BU) to titer inhibitors.
      • If the inhibitor is less than 10 BU per mL, the administration of additional RECOMBINATE concentrate may neutralize the inhibitor, and may permit an appropriate hemostatic response.
      • Adequate hemostasis may not be achieved if inhibitor titers are above 10 BU per mL. The inhibitor titer may rise following RECOMBINATE infusion as a result of an anamnestic response to factor VIII. The treatment or prevention of bleeding in such patients requires the use of alternative therapeutic approaches and agents.

    Carcinogenesis, Mutagenesis, Impairment of Fertility

    RECOMBINATE was tested for mutagenicity at doses considerably exceeding plasma concentrations of Factor VIII in vitro and at doses up to ten times the expected maximum clinical dose in vivo, and did not cause reverse mutations, chromosomal aberrations, or an increase in micronuclei in bone marrow polychromatic erythrocytes. Long-term studies in animals have not been performed to evaluate carcinogenic potential.

    Pediatric Use

    RECOMBINATE is appropriate for use in children of all ages, including the newborn. Safety and efficacy studies have been performed in both previously treated (n=23) and previously untreated (n=75) children. (See CLINICAL PHARMACOLOGY and PRECAUTIONS ).

    Pregnancy

    Pregnancy Category C. Animal reproduction studies have not been conducted with RECOMBINATE. The safety of RECOMBINATE for use in pregnant women has not been established. It is not known whether RECOMBINATE can cause fetal harm when administered to a pregnant woman or can affect reproductive capacity. Physicians should carefully consider the potential risks and benefits for each specific patient before prescribing RECOMBINATE. RECOMBINATE should be given to a pregnant woman only if clearly needed.

    Nursing Mothers

    It is not known whether this drug is excreted into human milk. Because many drugs are excreted into human milk, caution should be exercised if RECOMBINATE is administered to nursing mothers. RECOMBINATE should be given to nursing mothers only if clinically needed.

    Close
  • ADVERSE REACTIONS

    Adverse Reactions from Clinical Trials

    During controlled clinical studies with RECOMBINATE enrolling 210 subjects, the most commonly reported adverse drug reactions were chills, flushing, rash and epistaxis.

    *
    Number of evaluable subjects experiencing the event/total number of evaluable subjects [% relative to 210, the total number of unique subjects who received at least 1 infusion of RECOMBINATE].
    One subject experienced 11 events of epistaxis.
    System Organ Class
    (SOC)
    Preferred MedDRA
    Term
    Number of Subjects Percent of Evaluable Subjects*
    GASTROINTESTINAL DISORDERS Nausea 1 0.48
    GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS

    Chills

    Fatigue

    Pyrexia

    3

    1

    1

    1.43

    0.48

    0.48
    INFECTIONS AND INFESTATIONS Ear infections 1 0.48
    INVESTIGATIONS Acoustic stimulation tests abnormal 1 0.48
    MUSCULOSKELETAL AND CONNECTIVE TISSUES DISORDERS Pain in extremity 1 0.48
    NERVOUS SYSTEM DISORDERS

    Dizziness

    Tremors

    1

    1

    0.48

    0.48
    RESPIRATORY, THORACIC AND MEDIASTINAL DISORDERS Pharyngolaryngeal pain 1 0.48
    SKIN AND SUBCUTANEOUS TISSUE DISORDERS

    Hyperhidrosis

    Pruritus

    Rash

    Rash maculopapular

    1

    1

    2

    1

    0.48

    0.48

    0.95

    0.48
    VASCULAR DISORDERS

    Epistaxis

    Flushing

    Hematoma

    Hypotension

    Pallor

    Peripheral coldness

    1

    2

    1

    1

    1

    1

    0.48

    0.95

    0.48

    0.48

    0.48

    0.48

    During the Previously Treated Patients (PTP) study, none of the 71 subjects developed de novo evidence of Factor VIII inhibitor. However, during the phase II/III portion of the study, 1 subject with a history of inhibitors exhibited inhibitor activity at 6 months (0.8 Bethesda Units [BU]), which resolved by 9 months. One other subject in this study had detectable Factor VIII inhibitor at baseline (1.26 BU) and exhibited an anamnestic response at 6 months (10.3 BU). During a prospective pharmaco-surveillance study of subjects who received batches of RECOMBINATE containing modestly increased Chinese Hamster Ovary (CHO) cell protein levels, none of the 34 treated subjects developed a Factor VIII inhibitor.

    During the Previously Untreated Patients (PUP) study, 22 of the 73 evaluable subjects developed inhibitors to Factor VIII. Of these, 13 subjects displayed no detectable Factor VIII inhibitors at study exit.

    Post-Marketing Adverse Reactions

    In addition to the adverse reactions noted in clinical trials, the following adverse reactions have been reported in the post-marketing experience. These adverse reactions are listed by MedDRA (version 12.1) System Organ Class (SOC), then by MedDRA coding system Preferred Term in order of severity.

    BLOOD AND LYMPHATIC SYSTEM DISORDERS: Factor VIII inhibition

     CARDIAC DISORDERS: Tachycardia, Cyanosis

    GASTROINTESTINAL DISORDERS: Vomiting, Abdominal pain

    GENERAL DISORDERS AND ADMINISTRATION SITE CONDITIONS: Malaise, Injection site reactions, Chest pain, Chest discomfort

    IMMUNE SYSTEM DISORDERS: Anaphylactic reaction, Hypersensitivity

    NERVOUS SYSTEM DISORDERS: Loss of consciousness, Headache, Paresthesia

    RESPIRATORY, THORACIC AND MEDIASTINAL DISORDERS: Dyspnea, Cough, Laryngeal edema

    SKIN AND SUBCUTANEOUS TISSUE DISORDERS: Angioedema, Urticaria, Erythema

    Close
  • DOSAGE AND ADMINISTRATION

    Each vial of RECOMBINATE is labeled with the Factor VIII activity expressed in IU per vial. This potency assignment is referenced to the World Health Organization International Standard for Factor VIII:C Concentrate and is evaluated by appropriate methodology to ensure accuracy of the results.

    The expected in vivo peak increase in Factor VIII level expressed as IU/dL of plasma or % (percent) of normal can be estimated by multiplying the dose administered per kg body weight (IU/kg) by two. This calculation is based on the clinical findings of Abildgaard et al4 and is supported by the data generated by 419 clinical pharmacokinetic studies with RECOMBINATE in 67 patients over time. This pharmacokinetic data demonstrated a peak recovery point above the pre-infusion baseline of approximately 2.0 IU/dL per IU/kg body weight.

    Examples (Assuming patient’s baseline Factor VIII level is at <1%):

     
    (1) A dose of 1750 IU RECOMBINATE administered to a 70 kg patient, i.e. 25 IU/kg (1750 IU/70 kg), should be expected to cause a peak post-infusion Factor VIII increase of 25 IU/kg x 2 (IU/dL)/(IU/kg) = 50 IU/dL (50% of normal).
     
    (2) A peak level of 70% is required in a 40 kg child. In this situation, the dose would be 70 IU/dL/[2(IU/dL)/(IU/kg)] x 40 kg = 1400 IU.

    Recommended Dosage Schedule

    Physician supervision of the dosage is required. The following dosage schedule may be used as a guide.

    Hemorrhage
    Degree of Hemorrhage Required peak post-infusion Factor VIII activity in the blood (as % of normal or IU/dL plasma) Frequency of Infusion
    Early hemarthrosis or muscle bleed or oral bleed 20-40 Begin infusion every 12 to 24 hours for one-three days until the bleeding episode is resolved (as indicated by pain), or healing is achieved.
    More extensive hemarthrosis, muscle bleed, or hematoma 30-60 Repeat infusion every 12 to 24 hours for (usually) three days or more until pain and disability are resolved.
    Life threatening bleeds such as head injury, throat bleed, severe abdominal pain 60-100 Repeat infusion every 8 to 24 hours until threat is resolved
    Surgery
    Type of Operation
    Minor surgery, including tooth extraction 60-80 A single infusion plus oral antifibrinolytic therapy within one hour is sufficient in approximately 70% of cases.
    Major surgery 80-100
    (pre- and post-operative)
    Repeat infusion every 8 to 24 hours depending on state of healing.

    If bleeding is not controlled with the recommended dose, the plasma level of Factor VIII should be determined and a sufficient dose of RECOMBINATE should be administered to achieve a satisfactory clinical response.

    The careful control of the substitution therapy is especially important in cases of major surgery or life threatening hemorrhages. In presence of a low titer inhibitor, doses larger than those recommended may be necessary as per standard care.

    Although dosage can be estimated by the calculations above, it is strongly recommended that whenever possible, appropriate laboratory tests including serial Factor VIII assays be performed on the patient’s plasma at suitable intervals to assure that adequate Factor VIII levels have been reached and are maintained.

    Patients should be evaluated for the development of Factor VIII inhibitors, if the expected plasma Factor VIII activity levels are not attained, or if bleeding is not controlled with an appropriate dose.

    Reconstitution: Use Aseptic Technique

    1. Bring RECOMBINATE (dry factor concentrate) and Sterile Water for Injection, USP, (diluent) to room temperature.
    2. Remove caps from concentrate and diluent vials.
    3. Cleanse stoppers with germicidal solution and allow to dry prior to use. Place vials on a flat surface.
    4. Open the BAXJECT II device package by peeling away the lid, without touching the inside. Do not remove the device from the package.
    5. Turn the package over. Press straight down to fully insert the clear plastic spike through the diluent vial stopper.
    6. Grip the BAXJECT II package at its edge and pull the package off the device. Do not remove the blue cap from the BAXJECT II device. Do not touch the exposed white plastic spike.
    7. Turn the system over, so that the diluent vial is on top. Quickly insert the white plastic spike fully into the RECOMBINATE vial stopper by pushing straight down. The vacuum will draw the diluent into the RECOMBINATE vial.
    8. Swirl gently until RECOMBINATE is completely dissolved. After reconstitution, the solution should be colorless to faint yellow, and substantially free from foreign particles.

    NOTE: Do not refrigerate after reconstitution. (SeeAdministration)

    Administration: Use Aseptic Technique

    RECOMBINATE is administered by intravenous (IV) injection after reconstitution.

    Administer at room temperature.
    RECOMBINATE should be administered not more than 3 hours after reconstitution.

    Intravenous Syringe Injection

    Parenteral drug products should be inspected for particulate matter and discoloration prior to administration, whenever solution and container permit. The solution should be colorless to faint yellow in appearance. If not, do not use the solution and notify Baxter immediately.

    Plastic syringes are recommended for use with this product since proteins such as RECOMBINATE tend to stick to the surface of glass syringes.

    1. Remove the blue cap from the BAXJECT II device. Connect the syringe to the BAXJECT II device. DO NOT INJECT AIR.
    2. Turn over the connected vials so that the RECOMBINATE vial is on top. Draw the factor concentrate into the syringe by pulling the plunger back slowly.
    3. Disconnect the syringe; attach a suitable needle and inject intravenously as instructed under Rate of Administration .
    4. If a patient is to receive more than one vial of RECOMBINATE, the contents of multiple vials may be drawn into the same syringe. Please note that the BAXJECT II device is intended for use with a single vial of RECOMBINATE and Sterile Water for Injection only, therefore reconstituting and withdrawing a second vial into the syringe requires a second BAXJECT II device.

    Rate of Administration

    The rate of administration should be a rate that ensures the comfort of the patient. Preparations of RECOMBINATE can be administered at a rate of up to 5 mL per minute when reconstituted with 5 mL of sWFI.

    The pulse rate should be determined before and during administration of RECOMBINATE. Should a significant increase in pulse rate occur, reducing the rate of administration or temporarily halting the injection usually allows the symptoms to disappear promptly.

    Close
  • HOW SUPPLIED

    RECOMBINATE is available in five different strengths in single-dose vials. The strength is designated on the outer box and on the vial label using the following color codes:

    Color Code Dosage Strength RECOMBINATE Supplied with
    5 mL sWFI
    Light Blue bar 220-400 IU per vial NDC 0944-2841-10
    Pink bar 401-800 IU per vial NDC 0944-2842-10
    Green bar 801-1240 IU per vial NDC 0944-2843-10
    Purple bar 1241-1800 IU per vial NDC 0944-2844-10
    Orange bar 1801-2400 IU per vial NDC 0944-2845-10

    RECOMBINATE is packaged with 5 mL of Sterile Water for Injection, USP, a BAXJECT II Needleless Transfer Device, one physician insert and one patient insert.

    Close
  • STORAGE

    RECOMBINATE can be refrigerated [2° - 8°C (36° - 46°F)] or stored at room temperature, not to exceed 30°C (86°F). Avoid freezing to prevent damage to the diluent vial. Do not use beyond the expiration date printed on the box.

    Close
  • CLINICAL STUDIES

    Over the investigational period of the original safety and efficacy study of RECOMBINATE, none of the 69 subjects without an inhibitor at entry into the study, developed an inhibitor. In the previously untreated patient group there were 73 eligible subjects with Factor VIII levels less than or equal to 2% who received at least one RECOMBINATE treatment (median days 100, range 3-821) and who were tested for an inhibitor after treatment with RECOMBINATE. Of this group, 23 individuals (32%) developed a detectable inhibitor (median days on treatment at time of detection 10, range 3-69) and of these, 8 subjects (11%) showed a titer greater than 10 B.U.

    Close
  • REFERENCES

    1. Bray GL, Gomperts ED, Courter S, Gruppo R, et al: A Multicenter Study of Recombinant Factor VIII (Recombinate): Safety, Efficacy, and Inhibitor Risk in Previously Untreated Patients with Hemophilia A Blood 83:2428-2435, 1994
    2. White GC, McMillan CW, Kingdon HS, et al: Use of recombinant antihemophilic factor in the treatment of two patients with classic hemophilia. New Eng J Med 320:166-170, 1989
    3. Kessler CM: An Introduction to Factor VIII Inhibitors: The Detection and Quantitation. Am J Med 91 (Suppl 5A):1S-5S, 1991
    4. Abildgaard CF, Simone JV, Corrigan JJ, et al: Treatment of hemophilia with glycine-precipitated Factor VIII. New Eng J Med 275:471-475, 1966

    To enroll in the confidential, industry-wide Patient Notification System, call 1-888-UPDATE U (1-888-873-2838).

    Baxter, Recombinate, Hemofil, and Baxject are trademarks of Baxter International Inc.

    Manufactured by:
    Baxter Healthcare Corporation
    Westlake Village, CA 91362 USA
    U.S. License No. 140

    Printed in USA

    Issued: Dec 2010


    Close
  • Patient Information RECOMBINATE [Antihemophilic Factor (Recombinant)]

    This leaflet summarizes important information about RECOMBINATE. Please read it carefully before using this medicine. This information does not take the place of talking with your healthcare provider, and it does not include all of the important information about RECOMBINATE. If you have any questions after reading this, ask your healthcare provider.

    Kit components: RECOMBINATE and diluent vials and Baxject II
                                device.

    Do not attempt to self-infuse unless you have been taught how by your doctor or hemophilia center.

    What is RECOMBINATE [Antihemophilic Factor (Recombinant)]?

    RECOMBINATE is a medicine used to replace a clotting factor (Factor VIII or antihemophilic factor) that is missing in people with hemophilia A (also called “classic” hemophilia). Hemophilia A is an inherited bleeding disorder that prevents blood from clotting normally.

    RECOMBINATE is used to prevent and control bleeding in people with hemophilia A.

    RECOMBINATE is not used to treat von Willebrand’s Disease.

    Who should not use RECOMBINATE [Antihemophilic Factor (Recombinant)]?

    You should not use RECOMBINATE if you

    • are allergic to mouse, hamster or bovine proteins.
    • are allergic to any ingredients in RECOMBINATE (such as calcium, histidine, human albumin, polyethylene glycol, polysorbate-80 and sodium).

    Tell your healthcare provider if you are pregnant or breast-feeding because RECOMBINATE may not be right for you.

    How should I use RECOMBINATE [Antihemophilic Factor (Recombinant)] ?

    RECOMBINATE is given directly into the blood stream.

    You may infuse RECOMBINATE at a hemophilia treatment center, at your healthcare provider’s office or in your home. You should be trained on how to do infusions by your hemophilia treatment center or healthcare provider. Many people with hemophilia A learn to infuse their RECOMBINATE by themselves or with the help of a family member.

    You must carefully follow your doctor’s or other healthcare provider’s instructions regarding the dose and schedule for infusing RECOMBINATE so that your treatment will work best for you.

    Your healthcare provider will tell you how much RECOMBINATE to use based on your weight, the severity of your hemophilia A, and where you are bleeding.

    You may have to have blood tests done after getting RECOMBINATE to be sure that your blood level of Factor VIII is high enough to clot your blood.

    Call your healthcare provider right away if your bleeding does not stop after taking RECOMBINATE.
     

    What should I tell my healthcare provider before I use RECOMBINATE [Antihemophilic Factor (Recombinant)]?

    You should tell your healthcare provider if you

    • have or have had any medical problems.
    • take any medicines, including non-prescription medicines, dietary supplements and herbal remedies.
    • have any allergies, including allergies to mouse, hamster or bovine proteins.
    • are nursing.
    • are pregnant or planning to become pregnant.
    • have been told that you have inhibitors to Factor VIII (because Factor VIII may not work for you).

     

    What are the possible side effects of RECOMBINATE [Antihemophilic Factor (Recombinant)]?

    You could have an allergic reaction to RECOMBINATE.

    Call your healthcare provider right away and stop treatment if you get a:

    • Rash or hives
    • itching
    • tightness of the throat
    • chest pain or tightness
    • difficulty breathing
    • light-headed, dizziness
    • fainting

    The most common side effects are chills, flushing, rash and nose bleeds. These are not all possible side effects with RECOMBINATE. You can ask your healthcare provider for information that is written for healthcare professionals. Tell your doctor about any side effect that bothers you or that does not go away.

    What are the RECOMBINATE [Antihemophilic Factor (Recombinant)] dosage strengths?

    RECOMBINATE comes in five different dosage strengths. The actual strength will be imprinted on the label and on the box. The five different strengths are coded, as follows:

    NDC table

    Always check the potency printed on the label to make sure you are using the strength prescribed by your doctor. Always check the expiration date printed on the box. You should not use the product after the expiration date printed on the box.

    How do I store RECOMBINATE [Antihemophilic Factor (Recombinant)]?

    RECOMBINATE vials containing powdered product (without sterile diluent added) should be stored in a refrigerator (2° to 8°C [36° to 46°F]) or at room temperature (up to 30°C [86°F]).

    If you choose to store RECOMBINATE at room temperature:

    • it should remain at room temperature until infused.
    • do not put room temperature product back in the refrigerator.

    Store vials in their original box and protect them from extreme exposure to light.

    Do not freeze.

    Reconstituted product (after mixing dry product with wet diluent) must be used within 3 hours and cannot be stored or refrigerated. Any RECOMBINATE left in the vial at the end of your infusion should be discarded.

    What else should I know about RECOMBINATE [Antihemophilic Factor (Recombinant)] and hemophilia A?

    Your body may form inhibitors to Factor VIII. An inhibitor is part of the body’s normal defense system. If you form inhibitors, it may stop RECOMBINATE from working properly. Call your healthcare provider right away if your bleeding does not stop after taking RECOMBINATE. Consult with your healthcare provider to make sure you are carefully monitored with blood tests for the development of inhibitors to Factor VIII.

    Resources at Baxter available to the patients:

    Contact Baxter to receive more product information:

    Baxter Customer Service 1-800-423-2090

    Issued date: Dec 2010


    Close
  • Instructions for Use RECOMBINATE [Antihemophilic Factor (Recombinant)] (For intravenous use only)

    Do not attempt to do an infusion to yourself unless you have been taught how by your doctor or hemophilia center.

    1.    In a quiet place, prepare a clean flat surface and gather all the materials you will need for the infusion. Check the expiration date, and let the vial with the RECOMBINATE concentrate and the Sterile Water for Injection, USP (diluent) warm up to room temperature. Wash your hands and put on clean exam gloves. If infusing yourself at home, the use of gloves is optional.

    Kit components: RECOMBINATE and diluent vials and Baxject II
                                device.

    2.    Remove caps from the RECOMBINATE concentrate and diluent vials to expose the centers of the rubber stoppers.

    Remove the vial caps.

    3.    Disinfect the stoppers with an alcohol swab (or other suitable solution suggested by your doctor or hemophilia center) by rubbing the stoppers firmly for several seconds, and allow to dry prior to use. Place the vials on a flat surface.

    Disinfect the vial stoppers with suitable solution swab.

    4.    Open the BAXJECT II device package by peeling away the lid, without touching the inside of the package. Do not remove the BAXJECT II device from the package.

    Peel the lid on the Baxject II device packaging.

    5.    Turn the package with the BAXJECT II device upside down, and place it over the top of the diluent vial. Fully insert the clear plastic spike of the device into the center of the diluent vial’s stopper by pushing straight down. Grip the package at its edge and lift it off the device. Be careful not to touch the white plastic spike. Do not remove the blue cap from the BAXJECT II device.

    The diluent vial now has the BAXJECT II device connected to it and is ready to be connected to the RECOMBINATE vial.

    Place the Baxject II device over the diluent vial, inserting the
                                clear plastic spike into the center of the vial, removing the
                                package without touching the white plastic spike.

    6.    To connect the diluent vial to the RECOMBINATE vial, turn the diluent vial over and place it on top of the vial containing RECOMBINATE concentrate. Fully insert the white plastic spike into the RECOMBINATE vial’s stopper by pushing straight down. Diluent will flow into the RECOMBINATE vial. This should be done right away to keep the liquid free of germs.

    Invert the diluent vial over the RECOMBINATE vial and fully insert
                                the white spike into the RECOMBINATE vial stopper. Diluent will flow
                                into the RECOMBINATE vial.

    7.    Swirl the connected vials gently and continuously until the RECOMBINATE is completely dissolved. Do not shake. The RECOMBINATE solution should be colorless to light-yellow in appearance. If not, do not use it and notify Baxter immediately.

    Gently and continuously swirl the connected vials to completely
                                dissolve the RECOMBINATE. Do not shake.

    8.   Take off the blue cap from the BAXJECT II device and connect the syringe. BE CAREFUL TO NOT INJECT AIR.

    Remove the blue cap on the Baxject II device and connect the
                                syringe. Be careful to not inject air.

    9.    Turn over the connected vials so that the RECOMBINATE vial is on top. Draw the RECOMBINATE solution into the syringe by pulling back the plunger slowly. Disconnect the syringe from the vials. Attach the infusion needle to the syringe using a winged (butterfly) infusion set, if available. Point the needle up and remove any air bubbles by gently tapping the syringe with your finger and slowly and carefully pushing air out of the syringe and needle.

    Turn the connected vials so the RECOMBINATE vial is on top and
                                draw the solution into syringe. Disconnect the syringe and attach
                                infusion needle. Gently remove air bubbles.

    If you are using more than one vial of RECOMBINATE, the contents of more than one vial may be drawn into the same syringe. However, you will need a separate diluent and BAXJECT II device to mix each additional vial of RECOMBINATE.

    10.    Apply a tourniquet, and get the injection site ready by wiping the skin well with an alcohol swab (or other suitable solution suggested by your doctor or hemophilia center).

    Apply tourniquet and wipe injection site with suitable
                                solution.

    11.   Insert the needle into the vein, and remove the tourniquet. Slowly infuse the RECOMBINATE. Do not infuse any faster than 5 mL per minute for RECOMBINATE dissolved with 5 mL of sWFI.   Redness of the skin or irritation may be seen when infusing RECOMBINATE dissolved with 5 mL diluent.

    Insert needle into vein, remove tourniquet and slowly infuse
                                RECOMBINATE. Do not infuse any faster than 10 mL per minute.

    12.   Take the needle out of the vein and use sterile gauze to put pressure on the infusion site for several minutes.
    Do not recap the needle
    . Place it with the used syringe in a hard-walled Sharps container for proper disposal.

    13.   Remove the peel-off label from the RECOMBINATE vial and place it in your logbook. Clean any spilled blood with a freshly prepared mixture of 1 part bleach and 9 parts water, soap and water, or any household disinfecting solution.

    Remove peel-off label from RECOMBINATE vial and place in log
                                book.

    14.   Dispose of the used vials and BAXJECT II system in your hard-walled Sharps container, without taking them apart. Do not dispose of these supplies in ordinary household trash.

    Important: Contact your doctor or local Hemophilia Treatment Center if you experience any problems.

    Baxter, Recombinate, Hemofil, and Baxject are trademarks of Baxter International Inc.

    Manufactured by:

    Baxter Healthcare Corporation
    Westlake Village, CA 91362 USA
    U.S. License No. 140

    Printed in USA

    Close
  • Package Label - Principal Display Panel

    RECOMBINATE Unit Carton 250IU

    RECOMBINATE Unit Carton 250IU

    RECOMBINATE

    [Antihemophilic Factor (Recombinant)]

    NDC 0944-2841-10

    5 mL

    Rx Only

    Includes BAXJECT II Needleless Transfer Device

    Store in refrigerator at 36° to 46°F (2° to 8°C) or

    Store at room temperature up to 86°F (30°C)

    Do not freeze

    Baxter Healthcare Corporation, Westlake Village, CA 91362 USA

    U.S. License No. 140

    List Code 1502735

    RECOMBINATE Vial Label 250IU

    RECOMBINATE Vial Label 250IU

    NDC 0944-2831-01

    RECOMBINATE

    [Antihemophilic Factor (Recombinant)]

    For Intravenous Administration Only

    Store in refrigerator at 36° to 46°F (2° to 8°)

    or Store at room temperature up to 86°F (30°C)

    After reconstitution do not refrigerate

    Contains no preservative

    Directions for Use: See package insert

    Baxter Healthcare Corporation

    Westlake Village, CA 91362 USA

    U.S. License No. 140

    Rx Only

    RECOMBINATE Unit Carton 500IU

    RECOMBINATE Unit Carton 500IU

    RECOMBINATE

    [Antihemophilic Factor (Recombinant)]

    NDC 0944-2842-10

    5 mL

    Rx Only

    Includes BAXJECT II Needleless Transfer Device

    Store in refrigerator at 36° to 46°F (2° to 8°C) or

    Store at room temperature up to 86°F (30°C)

    Do not freeze

    Baxter Healthcare Corporation, Westlake Village, CA 91362 USA

    U.S. License No. 140

    List Code 1502736

    RECOMBINATE Vial Label 500IU

    RECOMBINATE Vial Label 500IU

    NDC 0944-2832-01

    RECOMBINATE

    [Antihemophilic Factor (Recombinant)]

    For Intravenous Administration Only

    Store in refrigerator at 36° to 46°F (2° to 8°)

    or Store at room temperature up to 86°F (30°C)

    After reconstitution do not refrigerate

    Contains no preservative

    Directions for Use: See package insert

    Baxter Healthcare Corporation

    Westlake Village, CA 91362 USA

    U.S. License No. 140

    Rx Only

    RECOMBINATE Unit Carton 1000IU

    RECOMBINATE Unit Carton 1000IU

    RECOMBINATE

    [Antihemophilic Factor (Recombinant)]

    NDC 0944-2843-10

    5 mL

    Rx Only

    Includes BAXJECT II Needleless Transfer Device

    Store in refrigerator at 36° to 46°F (2° to 8°C) or

    Store at room temperature up to 86°F (30°C)

    Do not freeze

    Baxter Healthcare Corporation, Westlake Village, CA 91362 USA

    U.S. License No. 140

    List Code 1502737

    RECOMBINATE Vial Label 1000IU

    RECOMBINATE Vial Label 1000IU

    NDC 0944-2833-01

    RECOMBINATE

    [Antihemophilic Factor (Recombinant)]

    For Intravenous Administration Only

    Store in refrigerator at 36° to 46°F (2° to 8°)

    or Store at room temperature up to 86°F (30°C)

    After reconstitution do not refrigerate

    Contains no preservative

    Directions for Use: See package insert

    Baxter Healthcare Corporation

    Westlake Village, CA 91362 USA

    U.S. License No. 140

    Rx Only

    RECOMBINATE Unit Carton 1500IU

    RECOMBINATE Unit Carton 1500IU

    RECOMBINATE

    [Antihemophilic Factor (Recombinant)]

    NDC 0944-2844-10

    5 mL

    Rx Only

    Includes BAXJECT II Needleless Transfer Device

    Store in refrigerator at 36° to 46°F (2° to 8°C) or

    Store at room temperature up to 86°F (30°C)

    Do not freeze

    Baxter Healthcare Corporation, Westlake Village, CA 91362 USA

    U.S. License No. 140

    List Code 1503132

    RECOMBINATE Vial Label 1500IU

    RECOMBINATE Vial Label 1500IU

    NDC 0944-2834-01

    RECOMBINATE

    [Antihemophilic Factor (Recombinant)]

    For Intravenous Administration Only

    Store in refrigerator at 36° to 46°F (2° to 8°)

    or Store at room temperature up to 86°F (30°C)

    After reconstitution do not refrigerate

    Contains no preservative

    Directions for Use: See package insert

    Baxter Healthcare Corporation

    Westlake Village, CA 91362 USA

    U.S. License No. 140

    Rx Only

    RECOMBINATE Unit Carton 2000IU

    RECOMBINATE Unit Carton 2000IU

    RECOMBINATE

    [Antihemophilic Factor (Recombinant)]

    NDC 0944-2845-10

    5 mL

    Rx Only

    Includes BAXJECT II Needleless Transfer Device

    Store in refrigerator at 36° to 46°F (2° to 8°C) or

    Store at room temperature up to 86°F (30°C)

    Do not freeze

    Baxter Healthcare Corporation, Westlake Village, CA 91362 USA

    U.S. License No. 140

    List Code 1503133

    RECOMBINATE Vial Label 2000IU

    RECOMBINATE Vial Label 2000IU

    NDC 0944-2835-01

    RECOMBINATE

    [Antihemophilic Factor (Recombinant)]

    For Intravenous Administration Only

    Store in refrigerator at 36° to 46°F (2° to 8°)

    or Store at room temperature up to 86°F (30°C)

    After reconstitution do not refrigerate

    Contains no preservative

    Directions for Use: See package insert

    Baxter Healthcare Corporation

    Westlake Village, CA 91362 USA

    U.S. License No. 140

    Rx Only

    5 mL Sterile Water vial label

    5 mL Sterile Water vial label

    5 mL

    NDC 52919-003-08

    Sterile Water for Injection, USP for reconstitution of accompanying product

    Do not use unless clear. No antimicrobial agent or other substance has been added. Do not use for intravascular injection without making approximately isotonic by addition of suitable solute. Discard unused portion. Rx Only

    Single dose container

    Nonpyrogenic

    Manufactured for:

    Baxter Healthcare Corporation

    Westlake Village, CA 91362 USA

    Manufactured by:

    Hameln Pharmaceuticals

    D-31758 Hameln, Germany

    Close
  • INGREDIENTS AND APPEARANCE
    RECOMBINATE 
    antihemophilic factor recombinant kit
    Product Information
    Product Type PLASMA DERIVATIVE Item Code (Source) NDC:0944-2841
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:0944-2841-10 1 in 1 CARTON
    Quantity of Parts
    Part # Package Quantity Total Product Quantity
    Part 1 1 VIAL, GLASS 10 mL
    Part 2 1 VIAL, GLASS 5 mL
    Part 1 of 2
    RECOMBINATE 
    antihemophilic factor recombinant injection, powder, lyophilized, for solution
    Product Information
    Item Code (Source) NDC:0944-2831
    Route of Administration INTRAVENOUS DEA Schedule     
    Active Ingredient/Active Moiety
    Ingredient Name Basis of Strength Strength
    ANTIHEMOPHILIC FACTOR, HUMAN RECOMBINANT (ANTIHEMOPHILIC FACTOR, HUMAN RECOMBINANT) ANTIHEMOPHILIC FACTOR, HUMAN RECOMBINANT 250 [iU]  in 5 mL
    Inactive Ingredients
    Ingredient Name Strength
    ALBUMIN HUMAN  
    CALCIUM  
    POLYETHYLENE GLYCOL 3350  
    SODIUM CHLORIDE  
    HISTIDINE  
    POLYSORBATE 80  
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:0944-2831-01 10 mL in 1 VIAL, GLASS
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    BLA BLA103375 12/10/1992
    Part 2 of 2
    STERILE WATER 
    water liquid
    Product Information
    Item Code (Source) NDC:52919-003
    Route of Administration INTRAVENOUS DEA Schedule     
    Inactive Ingredients
    Ingredient Name Strength
    WATER 5 mL  in 5 mL
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:52919-003-08 5 mL in 1 VIAL, GLASS
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    BLA BLA103375 12/10/1992
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    BLA BLA103375 12/10/1992
    RECOMBINATE 
    antihemophilic factor recombinant kit
    Product Information
    Product Type PLASMA DERIVATIVE Item Code (Source) NDC:0944-2842
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:0944-2842-10 1 in 1 CARTON
    Quantity of Parts
    Part # Package Quantity Total Product Quantity
    Part 1 1 VIAL, GLASS 10 mL
    Part 2 1 VIAL, GLASS 5 mL
    Part 1 of 2
    RECOMBIANTE 
    antihemophilic factor recombinant injection, powder, lyophilized, for solution
    Product Information
    Item Code (Source) NDC:0944-2832
    Route of Administration INTRAVENOUS DEA Schedule     
    Active Ingredient/Active Moiety
    Ingredient Name Basis of Strength Strength
    ANTIHEMOPHILIC FACTOR, HUMAN RECOMBINANT (ANTIHEMOPHILIC FACTOR, HUMAN RECOMBINANT) ANTIHEMOPHILIC FACTOR, HUMAN RECOMBINANT 500 [iU]  in 5 mL
    Inactive Ingredients
    Ingredient Name Strength
    ALBUMIN HUMAN  
    CALCIUM  
    POLYETHYLENE GLYCOL 3350  
    SODIUM CHLORIDE  
    HISTIDINE  
    POLYSORBATE 80  
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:0944-2832-01 10 mL in 1 VIAL, GLASS
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    BLA BLA103375 12/10/1992
    Part 2 of 2
    STERILE WATER 
    water liquid
    Product Information
    Item Code (Source) NDC:52919-003
    Route of Administration INTRAVENOUS DEA Schedule     
    Inactive Ingredients
    Ingredient Name Strength
    WATER 5 mL  in 5 mL
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:52919-003-08 5 mL in 1 VIAL, GLASS
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    BLA BLA103375 12/10/1992
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    BLA BLA103375 12/10/1992
    RECOMBINATE 
    antihemophilic factor recombinant kit
    Product Information
    Product Type PLASMA DERIVATIVE Item Code (Source) NDC:0944-2843
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:0944-2843-10 1 in 1 CARTON
    Quantity of Parts
    Part # Package Quantity Total Product Quantity
    Part 1 1 VIAL, GLASS 10 mL
    Part 2 1 VIAL, GLASS 5 mL
    Part 1 of 2
    RECOMBINATE 
    antihemophilic factor recombinant injection, powder, lyophilized, for solution
    Product Information
    Item Code (Source) NDC:0944-2833
    Route of Administration INTRAVENOUS DEA Schedule     
    Active Ingredient/Active Moiety
    Ingredient Name Basis of Strength Strength
    ANTIHEMOPHILIC FACTOR, HUMAN RECOMBINANT (ANTIHEMOPHILIC FACTOR, HUMAN RECOMBINANT) ANTIHEMOPHILIC FACTOR, HUMAN RECOMBINANT 1000 [iU]  in 5 mL
    Inactive Ingredients
    Ingredient Name Strength
    ALBUMIN HUMAN  
    CALCIUM  
    POLYETHYLENE GLYCOL 3350  
    SODIUM CHLORIDE  
    HISTIDINE  
    POLYSORBATE 80  
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:0944-2833-01 10 mL in 1 VIAL, GLASS
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    BLA BLA103375 12/10/1992
    Part 2 of 2
    STERILE WATER 
    water liquid
    Product Information
    Item Code (Source) NDC:52919-003
    Route of Administration INTRAVENOUS DEA Schedule     
    Inactive Ingredients
    Ingredient Name Strength
    WATER 5 mL  in 5 mL
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:52919-003-08 5 mL in 1 VIAL, GLASS
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    BLA BLA103375 12/10/1992
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    BLA BLA103375 12/10/1992
    RECOMBINATE 
    antihemophilic factor recombinant kit
    Product Information
    Product Type PLASMA DERIVATIVE Item Code (Source) NDC:0944-2844
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:0944-2844-10 1 in 1 CARTON
    Quantity of Parts
    Part # Package Quantity Total Product Quantity
    Part 1 1 VIAL, GLASS 10 mL
    Part 2 1 VIAL, GLASS 5 mL
    Part 1 of 2
    RECOMBINATE 
    antihemophilic factor recombinant injection, powder, lyophilized, for solution
    Product Information
    Item Code (Source) NDC:0944-2834
    Route of Administration INTRAVENOUS DEA Schedule     
    Active Ingredient/Active Moiety
    Ingredient Name Basis of Strength Strength
    ANTIHEMOPHILIC FACTOR, HUMAN RECOMBINANT (ANTIHEMOPHILIC FACTOR, HUMAN RECOMBINANT) ANTIHEMOPHILIC FACTOR, HUMAN RECOMBINANT 1500 [iU]  in 5 mL
    Inactive Ingredients
    Ingredient Name Strength
    ALBUMIN HUMAN  
    CALCIUM  
    POLYETHYLENE GLYCOL 3350  
    SODIUM CHLORIDE  
    HISTIDINE  
    POLYSORBATE 80  
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:0944-2834-01 10 mL in 1 VIAL, GLASS
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    BLA BLA103375 03/10/2010
    Part 2 of 2
    STERILE WATER 
    water liquid
    Product Information
    Item Code (Source) NDC:52919-003
    Route of Administration INTRAVENOUS DEA Schedule     
    Inactive Ingredients
    Ingredient Name Strength
    WATER 5 mL  in 5 mL
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:52919-003-08 5 mL in 1 VIAL, GLASS
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    BLA BLA103375 03/10/2010
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    BLA BLA103375 03/10/2010
    RECOMBINATE 
    antihemophilic factor recombinant kit
    Product Information
    Product Type PLASMA DERIVATIVE Item Code (Source) NDC:0944-2845
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:0944-2845-10 1 in 1 CARTON
    Quantity of Parts
    Part # Package Quantity Total Product Quantity
    Part 1 1 VIAL, GLASS 10 mL
    Part 2 1 VIAL, GLASS 5 mL
    Part 1 of 2
    RECOMBINATE 
    antihemophilic factor recombinant injection, powder, lyophilized, for solution
    Product Information
    Item Code (Source) NDC:0944-2835
    Route of Administration INTRAVENOUS DEA Schedule     
    Active Ingredient/Active Moiety
    Ingredient Name Basis of Strength Strength
    ANTIHEMOPHILIC FACTOR, HUMAN RECOMBINANT (ANTIHEMOPHILIC FACTOR, HUMAN RECOMBINANT) ANTIHEMOPHILIC FACTOR, HUMAN RECOMBINANT 2000 [iU]  in 5 mL
    Inactive Ingredients
    Ingredient Name Strength
    ALBUMIN HUMAN  
    CALCIUM  
    POLYETHYLENE GLYCOL 3350  
    SODIUM CHLORIDE  
    HISTIDINE  
    POLYSORBATE 80  
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:0944-2835-01 10 mL in 1 VIAL, GLASS
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    BLA BLA103375 03/10/2010
    Part 2 of 2
    STERILE WATER 
    water liquid
    Product Information
    Item Code (Source) NDC:52919-003
    Route of Administration INTRAVENOUS DEA Schedule     
    Inactive Ingredients
    Ingredient Name Strength
    WATER 5 mL  in 5 mL
    Packaging
    # Item Code Package Description Marketing Start Date Marketing End Date
    1 NDC:52919-003-08 5 mL in 1 VIAL, GLASS
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    BLA BLA103375 03/10/2010
    Marketing Information
    Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date
    BLA BLA103375 03/10/2010
    Labeler - Baxter Healthcare Corporation (039121363)
    Establishment
    Name Address ID/FEI Business Operations
    BAXTER HEALTHCARE CORPORATION 009471603 MANUFACTURE
    Establishment
    Name Address ID/FEI Business Operations
    Hameln Pharmaceutical GmbH 315869123 MANUFACTURE
    Close