Label: SODIUM CHLORIDE FOR IRRIGATION solution
- NDC Code(s): 0264-7388-50, 0264-7388-60
- Packager: B. Braun Medical Inc.
- Category: HUMAN PRESCRIPTION DRUG LABEL
Drug Label Information
Updated August 6, 2021
If you are a healthcare professional or from the pharmaceutical industry please visit this version.
- Download DRUG LABEL INFO: PDF XML
- Official Label (Printer Friendly)
- SPL UNCLASSIFIED SECTION
-
DESCRIPTION
Each 100 mL contains:
Sodium Chloride USP 0.9 g; Water for Injection USP qs
pH adjusted with Hydrochloric Acid NF
pH: 5.75 (4.50-7.00)
Calculated Osmolarity: 308 mOsmol/liter
Concentration of Electrolytes (mEq/liter): Sodium 154; Chloride 154
0.9% Sodium Chloride Irrigation USP is sterile, nonpyrogenic, isotonic and contains no bacteriostatic or antimicrobial agents.
The formula of the active ingredient is:
Ingredient Molecular Formula Molecular Weight Sodium Chloride USP NaCl 58.44 The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.
Not made with natural rubber latex, PVC or DEHP.
-
CLINICAL PHARMACOLOGY
0.9% Sodium Chloride Irrigation USP is utilized for a variety of clinical indications such as sterile irrigation of body cavities, tissues or wounds, indwelling urethral catheters, surgical drainage tubes, and for washing, rinsing or soaking surgical dressings, instruments and laboratory specimens. It also serves as a diluent or vehicle for drugs used for irrigation or other pharmaceutical preparations.
0.9% Sodium Chloride Irrigation USP provides an isotonic saline irrigation identical in composition with 0.9% Sodium Chloride Injection USP (normal saline).
Physiological irrigation solutions are considered generally compatible with living tissues and organs.
Sodium, the major cation of the extracellular fluid, functions primarily in the control of water distribution, fluid balance, and osmotic pressure of body fluids. Sodium is also associated with chloride and bicarbonate in the regulation of the acid-base equilibrium of body fluid.
Chloride, the major extracellular anion, closely follows the metabolism of sodium, and changes in the acid-base balance of the body are reflected by changes in the chloride concentration.
- INDICATIONS AND USAGE
- CONTRAINDICATIONS
-
WARNINGS
FOR IRRIGATION ONLY. NOT FOR INJECTION.
Irrigating fluids have been demonstrated to enter the systemic circulation in relatively large volumes; thus, irrigation solutions must be regarded as systemic drugs. Absorption of large amounts can cause fluid and/or solute overload resulting in dilution of serum electrolyte concentrations, overhydration, congested states or pulmonary edema.
The risk of dilutional states is inversely proportional to the electrolyte concentrations of the administered parenteral solutions. The risk of solute overload causing congested states with peripheral and pulmonary edema is directly proportional to the electrolyte concentration.
Do not warm above 150°F (66°C).
After opening container, its contents should be used promptly to minimize the possibility of bacterial growth or pyrogen formation.
Discard unused portion of irrigating solution since it contains no preservatives.
-
PRECAUTIONS
General
Use aseptic technique when preparing and administering sterile irrigation solutions.
Use only if solution is clear and container and seal are intact.
Do not use for irrigation that may result in absorption of large amounts of fluid into the blood.
Caution should be observed when the solution is used for continuous irrigation or allowed to ‘‘dwell” inside body cavities because of possible absorption into the blood stream and the production of circulatory overload.
When used for irrigation via appropriate irrigation equipment, the administration set should be attached promptly. Unused portions should be discarded and a fresh container of appropriate size used for the start up of each cycle or repeat procedure. For repeated irrigations of urethral catheters, a separate container should be used for each patient.
Laboratory Tests
Clinical evaluation and periodic laboratory determinations are necessary to monitor changes in fluid balance, electrolyte concentrations, and acid-base balance after prolonged irrigation, when fluid absorption is suspected, or whenever the condition of the patient warrants such evaluation.
Drug Interactions
Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic technique. Mix thoroughly. Do not store.
Carcinogenesis, Mutagenesis, Impairment of Fertility
Studies with 0.9% Sodium Chloride Irrigation USP have not been performed to evaluate carcinogenic potential, mutagenic potential, or effects on fertility.
Pregnancy
Teratogenic Effects
Animal reproduction studies have not been conducted with 0.9% Sodium Chloride Irrigation USP. It is also not known whether 0.9% Sodium Chloride Irrigation USP can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. 0.9% Sodium Chloride Irrigation USP should be given to a pregnant woman only if clearly needed.
Labor and Delivery
Safety and effectiveness of 0.9% Sodium Chloride Irrigation USP during labor and delivery have not been established. Caution should be exercised, and the fluid balance, glucose and electrolyte concentrations, and acid-base balance, of both mother and fetus should be evaluated periodically or whenever warranted by the condition of the patient or fetus.
Nursing Mothers
It is not known whether this drug is excreted in human milk. Because many drugs are excreted in human milk, caution should be exercised when 0.9% Sodium Chloride Irrigation USP is administered to a nursing woman.
Pediatric Use
The safety and effectiveness of 0.9% Sodium Chloride Irrigation USP in pediatric patients have not been established. Its limited use in pediatric patients has been inadequate to fully define proper dosage and limitations for use.
Geriatric Use
Clinical studies of 0.9% Sodium Chloride Irrigation USP did not include a sufficient number of patients age 65 years and over to determine whether they respond differently from younger subjects. In general, dose selection for an elderly patient should be cautious, usually starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac function, and of concomitant disease or other drug therapy.
This drug is known to be substantially excreted by the kidney, and the risk of toxic reactions to this drug may be greater in patients with impaired renal function. Because elderly patients are more likely to have decreased renal function, care should be taken in dose selection, and it may be useful to monitor renal function. Frequent laboratory determinations and clinical evaluations are recommended to monitor changes in blood glucose, electrolyte concentrations, and renal function.
-
ADVERSE REACTIONS
Possible adverse effects arising from the irrigation of body cavities, tissues, or indwelling catheters and tubes can be minimized when proper procedures are followed. Displaced catheters or drainage tubes can lead to irrigation or infiltration of unintended structures or cavities. Excessive volume or pressure during irrigation of closed cavities may cause undue distension or disruption of tissues. Accidental contamination from careless technique may transmit infection.
If an adverse reaction does occur, discontinue administration of the irrigant, evaluate the patient, institute appropriate therapeutic countermeasures, and save the remainder of the fluid for examination if deemed necessary.
-
OVERDOSAGE
In the event of overhydration or solute overload, reevaluate the patient’s condition, and institute appropriate corrective treatment. Intravascular volume overload may respond to hemodialysis. See WARNINGS, PRECAUTIONS, and ADVERSE REACTIONS.
-
DOSAGE AND ADMINISTRATION
As required for irrigation.
When used as a diluent, or vehicle for other drugs, the drug manufacturer's recommendations should be followed.
Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store.
Solutions should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permits.
-
HOW SUPPLIED
0.9% Sodium Chloride Irrigation USP is supplied sterile and nonpyrogenic in single-dose 2000 mL and 3000 mL plastic containers packaged 4 per case.
NDC REF SIZE 0264-7388-50 R8205 2000 mL 0264-7388-60 R8206 3000 mL Exposure of pharmaceutical products to heat should be minimized. Avoid excessive heat. Protect from freezing. It is recommended that the product be stored at room temperature (25°C); however, brief exposure up to 40°C does not adversely affect the product.
Do not warm above 150°F (66°C).
-
SPL UNCLASSIFIED SECTION
Directions for Use of Plastic Container
Not for injection.
Not for use with pressurized irrigation systems.
Aseptic technique is required.
- Inspect irrigation bag: overwrap and primary bag.
- Do not use if overwrap has been damaged.
- Do not use unless solution is clear and closure is intact.
- To open: Tear overwrap starting from the tear notches. (Figure 1)
- Prepare medication port by removal of aluminum foil. (Figure 2a)
- Puncture resealable medication port by using 19 – 22 gauge needle and inject additive(s). (Figure 2b)
- Mix solution and medication thoroughly. (Figure 3a)
- Medication port must be swabbed with disinfection agent (e.g. iso-propanol or chlorhexidine) before re-puncturing.
- Check admixture visually for particulate matter. (Figure 3b)
- Puncture resealable medication port by using 19 – 22 gauge needle and inject additive(s). (Figure 2b)
- Remove aluminum foil from outlet/set port at the bottom of container (Figure 4a) and attach administration set (Figure 4b): use non-vented infusion set or close air vent on a vented set. Refer to directions for use accompanying the administration set.
- Hang bag on IV Pole. (Figure 5)
- SPL UNCLASSIFIED SECTION
-
PRINCIPAL DISPLAY PANEL - 2000 mL Container Label
0.9% SODIUM CHLORIDE IRRIGATION USP
ISOTONIC SOLUTION FOR IRRIGATION
REF R8205
NDC 0264-7388-50
LOT
EXP.2000 mL
Each 100 mL contains
Sodium Chloride USP 0.9 g
Water for Injection USP qspH adjusted with
Hydrochloric Acid NFpH: 5.75 (4.50-7.00)
Calc. Osmolarity: 308 mOsmol/literElectrolytes (mEq/liter):
Sodium 154 Chloride 154Sterile, nonpyrogenic. Single unit container.
Discard unused portion.Not for Injection. Use only if solution is clear and
container and seal are intact.Warning: Do not warm above 150°F (66°C).
Recommended Storage: Room temperature (25°C).
Avoid excessive heat. Protect from freezing.See Package Insert.
Not made with natural
rubber latex, PVC or DEHP.Rx only
Y38-000-060 LD-253-7
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862SET
0.9% Sodium Chloride Irrigation 2L Container Label
-
PRINCIPAL DISPLAY PANEL - 3000 mL Container Label
0.9% SODIUM CHLORIDE IRRIGATION USP
ISOTONIC SOLUTION FOR IRRIGATION
REF R8206
NDC 0264-7388-60
LOT
EXP.3000 mL
Each 100 mL contains
Sodium Chloride USP 0.9 g
Water for Injection USP qspH adjusted with
Hydrochloric Acid NFpH: 5.75 (4.50-7.00)
Calc. Osmolarity:
308 mOsmol/literElectrolytes (mEq/liter):
Sodium 154 Chloride 154Sterile, nonpyrogenic. Single unit container. Discard
unused portion.Not for Injection. Use only if solution is clear
and container and seal are intact.Warning: Do not warm above 150°F (66°C).
Recommended Storage: Room temperature
(25°C). Avoid excessive heat. Protect from
freezing.See Package Insert.
Not made with natural
rubber latex, PVC or DEHP.Rx only
Y38-000-061 LD-254-6
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862SET
0.9% Sodium Chloride Irrigation 3L Container Label
-
INGREDIENTS AND APPEARANCE
SODIUM CHLORIDE FOR IRRIGATION
sodium chloride for irrigation solutionProduct Information Product Type HUMAN PRESCRIPTION DRUG Item Code (Source) NDC:0264-7388 Route of Administration IRRIGATION Active Ingredient/Active Moiety Ingredient Name Basis of Strength Strength SODIUM CHLORIDE (UNII: 451W47IQ8X) (SODIUM CATION - UNII:LYR4M0NH37, CHLORIDE ION - UNII:Q32ZN48698) SODIUM CHLORIDE 0.9 g in 100 mL Inactive Ingredients Ingredient Name Strength WATER (UNII: 059QF0KO0R) Packaging # Item Code Package Description Marketing Start Date Marketing End Date 1 NDC:0264-7388-50 4 in 1 CASE 04/19/2013 1 2000 mL in 1 CONTAINER; Type 0: Not a Combination Product 2 NDC:0264-7388-60 4 in 1 CASE 04/19/2013 2 3000 mL in 1 CONTAINER; Type 0: Not a Combination Product Marketing Information Marketing Category Application Number or Monograph Citation Marketing Start Date Marketing End Date NDA NDA016733 04/19/2013 Labeler - B. Braun Medical Inc. (002397347) Establishment Name Address ID/FEI Business Operations B. Braun Medical Inc. 037425308 label(0264-7388) , manufacture(0264-7388) , pack(0264-7388)